이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
24LC32AFT-E/OT

24LC32AFT-E/OT

Product Category: Integrated Circuit

Basic Information Overview: - Category: EEPROM (Electrically Erasable Programmable Read-Only Memory) - Use: Non-volatile memory storage - Characteristics: I2C interface, low power consumption, small package size - Package: 8-lead TDFN (Thin Dual Flat No-Lead) package - Essence: Data retention and storage in electronic devices - Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications: - Memory Size: 32 Kbit - Interface: I2C - Operating Voltage: 1.7V to 5.5V - Operating Temperature Range: -40°C to +85°C - Write Cycle Endurance: 1,000,000 cycles - Data Retention: 200 years

Detailed Pin Configuration: - Pin 1: A0 (Device Address Input) - Pin 2: A1 (Device Address Input) - Pin 3: A2 (Device Address Input) - Pin 4: VSS (Ground) - Pin 5: SDA (I2C Serial Data) - Pin 6: SCL (I2C Serial Clock) - Pin 7: WP (Write Protect) - Pin 8: VCC (Power Supply)

Functional Features: - Byte and Page Write Modes - Self-timed Write Cycle - 32-byte Page Buffer - Sequential Read Operation - Hardware Write Protection

Advantages: - Low power consumption - Small package size - High data retention - Wide operating voltage range

Disadvantages: - Limited memory size compared to other EEPROMs - Slower write speed compared to some competing models

Working Principles: The 24LC32AFT-E/OT operates by using an I2C interface to communicate with a microcontroller or other devices. It allows for non-volatile data storage, with the ability to read and write data through the I2C protocol.

Detailed Application Field Plans: - Consumer Electronics: Used for storing configuration settings and user data in various consumer electronic devices. - Industrial Automation: Employed for parameter storage and data logging in industrial automation systems. - Automotive: Utilized for storing calibration data and event logs in automotive electronics.

Detailed and Complete Alternative Models: - AT24C32: Similar 32 Kbit EEPROM with I2C interface - CAT24C32: Competing 32 Kbit EEPROM with I2C interface and additional features

This comprehensive entry provides a detailed overview of the 24LC32AFT-E/OT, covering its category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

기술 솔루션에 24LC32AFT-E/OT 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum clock frequency for 24LC32AFT-E/OT?
    - The maximum clock frequency for 24LC32AFT-E/OT is 400 kHz.

  2. What is the operating voltage range for 24LC32AFT-E/OT?
    - The operating voltage range for 24LC32AFT-E/OT is 1.7V to 5.5V.

  3. Can 24LC32AFT-E/OT be used in automotive applications?
    - Yes, 24LC32AFT-E/OT is AEC-Q100 qualified and suitable for automotive applications.

  4. What is the typical write cycle time for 24LC32AFT-E/OT?
    - The typical write cycle time for 24LC32AFT-E/OT is 5 ms.

  5. Does 24LC32AFT-E/OT support sequential reads?
    - Yes, 24LC32AFT-E/OT supports sequential reads for efficient data retrieval.

  6. Is 24LC32AFT-E/OT compatible with I2C communication protocol?
    - Yes, 24LC32AFT-E/OT is compatible with the I2C communication protocol.

  7. What is the temperature range for 24LC32AFT-E/OT?
    - The temperature range for 24LC32AFT-E/OT is -40°C to +125°C.

  8. Can 24LC32AFT-E/OT be used in battery-powered devices?
    - Yes, 24LC32AFT-E/OT's low power consumption makes it suitable for battery-powered devices.

  9. What is the maximum number of write cycles for 24LC32AFT-E/OT?
    - 24LC32AFT-E/OT can endure up to 1 million write cycles.

  10. Does 24LC32AFT-E/OT have built-in write protection?
    - Yes, 24LC32AFT-E/OT features built-in hardware write protection for added security.