이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
25AA160/SN

25AA160/SN

Product Overview

Category: Integrated Circuit (IC)

Use: Non-volatile Memory

Characteristics: - Serial EEPROM (Electrically Erasable Programmable Read-Only Memory) - Low-power consumption - High reliability and endurance - Wide operating voltage range - Small form factor

Package: SOIC (Small Outline Integrated Circuit)

Essence: The 25AA160/SN is a serial EEPROM IC that provides non-volatile memory storage. It is commonly used in electronic devices to store small amounts of data that need to be retained even when power is removed.

Packaging/Quantity: The 25AA160/SN is available in a SOIC package, which stands for Small Outline Integrated Circuit. It is a surface-mount package with a compact size. The quantity per package may vary depending on the manufacturer.

Specifications

  • Memory Size: 16 kilobits (2 kilobytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage Range: 1.8V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Endurance: 1 million cycles
  • Data Retention: 200 years

Detailed Pin Configuration

The 25AA160/SN has a total of 8 pins:

  1. Chip Select (/CS) - Used to enable or disable the device.
  2. Serial Clock (SCK) - Provides the clock signal for data transfer.
  3. Serial Data Input (SI) - Used to input data into the device.
  4. Serial Data Output (SO) - Outputs data from the device.
  5. Write Protect (/WP) - Allows write protection of the memory array.
  6. VCC - Power supply voltage.
  7. Ground (GND) - Ground reference.
  8. Hold (/HOLD) - Suspends serial communication temporarily.

Functional Features

  • Byte and Page Write Operations: The 25AA160/SN supports both byte and page write operations, allowing flexible data storage.
  • Sequential Read: It enables sequential read of the memory array, making it efficient for accessing consecutive data.
  • Software Protection: The device provides software protection by allowing write protection of the memory array using the Write Protect (/WP) pin.
  • High-Speed SPI Interface: The Serial Peripheral Interface (SPI) allows fast and reliable data transfer between the IC and the microcontroller.

Advantages and Disadvantages

Advantages: - Non-volatile memory ensures data retention even without power. - Low-power consumption makes it suitable for battery-powered devices. - High reliability and endurance ensure long-term data storage. - Wide operating voltage range allows compatibility with various systems. - Small form factor saves space in electronic designs.

Disadvantages: - Limited storage capacity compared to other memory technologies. - Slower write speed compared to some other memory types. - Susceptible to electromagnetic interference due to its small size.

Working Principles

The 25AA160/SN utilizes EEPROM technology to store data. It consists of a memory array divided into individual memory cells that can be electrically programmed and erased. The data is stored in these cells as electrical charges, which are retained even when power is removed.

The IC communicates with a microcontroller through the Serial Peripheral Interface (SPI). The microcontroller sends commands and data to the 25AA160/SN, which then stores or retrieves the information from its memory array.

Detailed Application Field Plans

The 25AA160/SN is widely used in various electronic devices and applications, including but not limited to: - Consumer electronics - Automotive systems - Industrial control systems - Medical devices - Communication equipment

It is commonly employed for storing configuration settings, calibration data, user preferences, and other small amounts of non-volatile data.

Detailed and Complete Alternative Models

Some alternative models to the 25AA160/SN include: - AT24C02: A similar serial EEPROM IC manufactured by Atmel. - CAT24C16: Another serial EEPROM IC with a larger memory capacity. - M93C46: A compatible serial EEPROM IC produced by STMicroelectronics.

These alternative models offer different memory sizes, package options, and additional features, providing flexibility for various design requirements.

In conclusion, the 25AA160/SN is a serial EEPROM IC that offers non-volatile memory storage in a compact form factor. With its low-power consumption, high reliability, and wide operating voltage range, it finds applications in diverse electronic devices. While it has limitations in terms of storage capacity and write speed, it provides an efficient and reliable solution for storing small amounts of critical data.

기술 솔루션에 25AA160/SN 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. Question: What is the maximum clock frequency for 25AA160/SN?
    Answer: The maximum clock frequency for 25AA160/SN is 10 MHz.

  2. Question: What is the operating voltage range for 25AA160/SN?
    Answer: The operating voltage range for 25AA160/SN is 1.8V to 5.5V.

  3. Question: Can 25AA160/SN be used in automotive applications?
    Answer: Yes, 25AA160/SN is AEC-Q100 qualified and suitable for automotive applications.

  4. Question: What is the typical write time for 25AA160/SN?
    Answer: The typical write time for 25AA160/SN is 5 ms.

  5. Question: Does 25AA160/SN support SPI bus protocols?
    Answer: Yes, 25AA160/SN supports SPI bus protocols.

  6. Question: What is the temperature range for 25AA160/SN?
    Answer: The temperature range for 25AA160/SN is -40°C to 85°C.

  7. Question: Is 25AA160/SN RoHS compliant?
    Answer: Yes, 25AA160/SN is RoHS compliant.

  8. Question: Can 25AA160/SN be used in industrial control systems?
    Answer: Yes, 25AA160/SN is suitable for use in industrial control systems.

  9. Question: What is the maximum data retention for 25AA160/SN?
    Answer: The maximum data retention for 25AA160/SN is 100 years.

  10. Question: Does 25AA160/SN have a hardware write protection feature?
    Answer: Yes, 25AA160/SN includes a hardware write protection feature.