AT24C08-10PI-1.8

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Non-volatile Electrically Erasable Programmable Read-Only Memory (EEPROM)
• Characteristics:
  • Low-power CMOS technology
  • 8K (8192) bits of EEPROM memory
  • 1.8V operating voltage
• Package: PDIP (Plastic Dual In-line Package)
• Essence: Data storage and retrieval in electronic devices
• Packaging/Quantity: Tray, 100 pieces per tray

Specifications

• Memory Size: 8K bits (1024 bytes)
• Operating Voltage: 1.8V
• Interface: I2C (Two-wire Serial Interface)
• Write Time: 5ms (byte write cycle time)
• Data Retention: 100 years
• Endurance: 1 million write cycles

Detailed Pin Configuration

The AT24C08-10PI-1.8 IC has a total of 8 pins, which are as follows:

1. A0: Address Input
2. A1: Address Input
3. A2: Address Input
4. GND: Ground
5. SDA: Serial Data Input/Output
6. SCL: Serial Clock Input
7. WP: Write Protect
8. VCC: Power Supply

Functional Features

• Non-volatile memory: The data stored in the AT24C08-10PI-1.8 remains even when power is removed.
• Electrically erasable and programmable: Allows for easy modification of stored data.
• Low-power consumption: Operates at a low voltage of 1.8V, making it suitable for battery-powered devices.
• I2C interface: Uses a two-wire serial interface for communication with other devices.

Advantages and Disadvantages

Advantages: - Non-volatile memory ensures data retention even during power loss. - Electrically erasable and programmable, allowing for easy updates. - Low-power consumption extends battery life in portable devices.

Disadvantages: - Limited storage capacity compared to other memory technologies. - Slower write time compared to some other EEPROMs.

Working Principles

The AT24C08-10PI-1.8 operates based on the principles of electrically erasable programmable read-only memory (EEPROM). It uses a combination of transistors and capacitors to store and retrieve digital information. The I2C interface enables communication between the IC and other devices, allowing for data reading and writing operations.

Detailed Application Field Plans

The AT24C08-10PI-1.8 is widely used in various electronic devices that require non-volatile memory for data storage and retrieval. Some common application fields include: - Consumer electronics: Smartphones, tablets, digital cameras, etc. - Automotive: Engine control units, infotainment systems, etc. - Industrial automation: Programmable logic controllers, sensors, etc. - Medical devices: Patient monitoring systems, medical imaging equipment, etc.

Detailed and Complete Alternative Models

• AT24C01A: 1K-bit EEPROM with similar features but smaller memory size.
• AT24C16: 16K-bit EEPROM with larger memory capacity.
• AT24C256: 256K-bit EEPROM with significantly higher storage capacity.

These alternative models offer different memory sizes to suit specific application requirements.

Word count: 314 words