AT24C08BN-SH-T belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.
This chip is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.
The AT24C08BN-SH-T is available in an industry-standard 8-pin Small Outline Integrated Circuit (SOIC) package.
The essence of AT24C08BN-SH-T lies in its ability to provide reliable and non-volatile data storage in a compact and low-power package.
This chip is typically sold in reels or tubes, with each reel containing 2500 units.
The AT24C08BN-SH-T has the following pin configuration:
```
| | | 1 2 3 4| | | | 8 7 6 5| |___________| ```
The AT24C08BN-SH-T utilizes a floating-gate transistor structure to store data. When a voltage is applied, electrons are trapped in the floating gate, representing a logical "1." Conversely, when the voltage is removed, the absence of trapped electrons represents a logical "0." The stored data can be read, written, or erased by applying appropriate electrical signals.
The AT24C08BN-SH-T finds applications in various fields, including:
These alternative models offer varying storage capacities and features, allowing users to choose the most suitable option for their specific requirements.
In conclusion, the AT24C08BN-SH-T
Sure! Here are 10 common questions and answers related to the application of AT24C08BN-SH-T in technical solutions:
Q: What is AT24C08BN-SH-T? A: AT24C08BN-SH-T is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by Microchip Technology. It has a storage capacity of 8 kilobits (1 kilobyte) and operates on the I2C communication protocol.
Q: What are the typical applications of AT24C08BN-SH-T? A: AT24C08BN-SH-T is commonly used for storing configuration data, calibration values, and other small amounts of non-volatile data in various electronic devices such as microcontrollers, sensors, and industrial control systems.
Q: How does AT24C08BN-SH-T connect to a microcontroller or other devices? A: AT24C08BN-SH-T uses the I2C bus interface, which requires two lines - SDA (Serial Data) and SCL (Serial Clock). These lines are connected to the corresponding pins on the microcontroller or other devices.
Q: What is the operating voltage range of AT24C08BN-SH-T? A: AT24C08BN-SH-T operates within a voltage range of 1.7V to 5.5V, making it compatible with a wide range of microcontrollers and other devices.
Q: Can AT24C08BN-SH-T be easily soldered onto a PCB? A: Yes, AT24C08BN-SH-T comes in a standard 8-pin SOIC (Small Outline Integrated Circuit) package, which can be easily soldered onto a PCB using conventional surface mount techniques.
Q: Does AT24C08BN-SH-T support write protection? A: Yes, AT24C08BN-SH-T provides hardware write protection by using a dedicated pin (WP) that can be connected to a microcontroller's GPIO pin or set to a fixed logic level to prevent accidental writes.
Q: What is the maximum clock frequency supported by AT24C08BN-SH-T? A: AT24C08BN-SH-T supports a maximum clock frequency of 1 MHz, allowing for fast data transfer between the chip and the microcontroller.
Q: Can AT24C08BN-SH-T operate in extreme temperature conditions? A: Yes, AT24C08BN-SH-T has an extended temperature range of -40°C to +125°C, making it suitable for applications that require operation in harsh environments.
Q: How many write cycles does AT24C08BN-SH-T support? A: AT24C08BN-SH-T supports a minimum of 1 million write cycles, ensuring durability and reliability for frequent data updates.
Q: Is AT24C08BN-SH-T compatible with other EEPROM chips from Microchip? A: Yes, AT24C08BN-SH-T follows the same I2C protocol as other EEPROM chips from Microchip, making it easy to integrate with existing designs and systems.
Please note that these answers are general and may vary depending on specific requirements and datasheet specifications.