AT24C11N-10SU-2.7-T

Product Overview

Category

AT24C11N-10SU-2.7-T belongs to the category of electronic memory devices.

Use

It is primarily used for storing and retrieving digital information in various electronic systems.

Characteristics

• Non-volatile memory: The stored data is retained even when power is removed.
• High storage capacity: The AT24C11N-10SU-2.7-T has a capacity of 1,024 kilobits (128 kilobytes).
• Low power consumption: It operates at a low voltage and consumes minimal power.
• Serial interface: The device communicates using a two-wire serial interface protocol.
• Small form factor: The package size is compact, making it suitable for space-constrained applications.

Package

The AT24C11N-10SU-2.7-T is available in a small outline SOIC-8 package.

Essence

The essence of AT24C11N-10SU-2.7-T lies in its ability to provide reliable and non-volatile storage for electronic systems.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2,500 units per reel.

Specifications

• Operating voltage: 2.7V - 5.5V
• Operating temperature range: -40°C to +85°C
• Write cycle endurance: 1,000,000 cycles
• Data retention: 100 years
• Interface: I2C (Two-wire serial)

Detailed Pin Configuration

The AT24C11N-10SU-2.7-T features an 8-pin configuration:

1. A0: Address input pin
2. A1: Address input pin
3. A2: Address input pin
4. GND: Ground
5. SDA: Serial data input/output
6. SCL: Serial clock input
7. WP: Write protect pin
8. VCC: Power supply

Functional Features

• Random access: Allows reading and writing of specific memory locations.
• Byte-level operations: Supports individual byte read and write operations.
• Page write mode: Enables faster writes by allowing multiple bytes to be written in a single operation.
• Hardware write protection: The WP pin can be used to protect the memory from accidental writes.

Advantages and Disadvantages

Advantages

• Non-volatile storage ensures data retention even during power loss.
• Compact package size allows for integration into space-constrained designs.
• Low power consumption extends battery life in portable devices.
• High endurance and long data retention make it suitable for various applications.

Disadvantages

• Limited storage capacity compared to other memory devices.
• Slower write speed compared to some alternative models.
• Requires an I2C interface, which may not be compatible with all systems.

Working Principles

The AT24C11N-10SU-2.7-T utilizes electrically erasable programmable read-only memory (EEPROM) technology. It stores data in a grid of memory cells that can be individually addressed and written to or read from using the I2C protocol. The non-volatile nature of EEPROM ensures that data remains intact even when power is removed.

Detailed Application Field Plans

The AT24C11N-10SU-2.7-T finds application in various electronic systems, including but not limited to: - Consumer electronics - Industrial automation - Automotive electronics - Medical devices - Smart meters

Detailed and Complete Alternative Models

1. AT24C01A-10PU-2.7: 1 kilobit (128 bytes) capacity, DIP-8 package.
2. AT24C256C-SSHL-T: 256 kilobits (32 kilobytes) capacity, TSSOP-8 package.
3. AT24CM01-SSHM-T: 1 megabit (128 kilobytes) capacity, TSSOP-8 package.

These alternative models offer different capacities and package options to suit specific requirements.

---

Word count: 527 words