AT24C164-10PC

Product Overview

Category

AT24C164-10PC belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

The AT24C164-10PC chip is primarily used for non-volatile data storage in various electronic devices.

Characteristics

• Electrically erasable and programmable
• Non-volatile memory
• Low power consumption
• High reliability
• Small form factor

Package

AT24C164-10PC is available in a 20-pin plastic dual in-line package (PDIP).

Essence

The essence of AT24C164-10PC lies in its ability to store and retrieve digital information reliably and efficiently.

Packaging/Quantity

AT24C164-10PC is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

• Memory Size: 16 kilobits (2 kilobytes)
• Organization: 2048 x 8 bits
• Supply Voltage: 1.7V to 5.5V
• Operating Temperature Range: -40°C to +85°C
• Data Retention: 100 years
• Write Cycle Endurance: 1 million cycles

Detailed Pin Configuration

The AT24C164-10PC chip has a total of 20 pins, each serving a specific function. The pin configuration is as follows:

1. A0: Address Input
2. A1: Address Input
3. A2: Address Input
4. GND: Ground
5. SDA: Serial Data Input/Output
6. SCL: Serial Clock Input
7. WP: Write Protect
8. VCC: Supply Voltage

9-20. Not connected (NC)

Functional Features

• Random access to any memory location
• Byte-wise and page-wise write operations
• Sequential read operation
• Software and hardware write protection
• Self-timed write cycle

Advantages

• High reliability due to non-volatile memory technology
• Low power consumption, suitable for battery-powered devices
• Compact form factor allows integration into small electronic devices
• Wide operating voltage range enables compatibility with various systems

Disadvantages

• Limited storage capacity compared to other memory technologies
• Relatively slower write and erase operations
• Susceptible to electromagnetic interference

Working Principles

AT24C164-10PC utilizes EEPROM technology, which allows for electrically erasing and reprogramming of data. The chip consists of a grid of memory cells that can be individually addressed and written to or read from using serial communication protocols.

Detailed Application Field Plans

AT24C164-10PC finds applications in various fields, including but not limited to:

1. Consumer electronics: Used in smart TVs, set-top boxes, and audio/video equipment for storing user preferences and settings.
2. Automotive: Employed in car infotainment systems and instrument clusters for data storage and configuration.
3. Industrial automation: Integrated into programmable logic controllers (PLCs) and industrial control systems for storing critical parameters and program code.
4. Medical devices: Utilized in medical equipment for storing patient data and device configurations.
5. Internet of Things (IoT): Incorporated into IoT devices for storing sensor data and device-specific information.

Detailed and Complete Alternative Models

1. AT24C01A-10PU: 1 kilobit (128 bytes) EEPROM chip
2. AT24C256C-SSHL-T: 256 kilobit (32 kilobytes) EEPROM chip
3. AT24CM02-SSHM-T: 2 megabit (256 kilobytes) EEPROM chip
4. AT24C1024B-TH-B: 1 megabit (128 kilobytes) EEPROM chip

These alternative models offer different storage capacities to suit specific application requirements.

In conclusion, the AT24C164-10PC is a reliable and versatile EEPROM chip that provides non-volatile data storage for various electronic devices. Its compact size, low power consumption, and wide operating voltage range make it suitable for a wide range of applications. However, its limited storage capacity and relatively slower write/erase operations should be considered when selecting an appropriate memory solution.