이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
AT24C16A-10TU-2.7

AT24C16A-10TU-2.7

Product Overview

Category

AT24C16A-10TU-2.7 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This product is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile: The stored data remains even when power is removed.
  • Electrically erasable: Data can be erased and reprogrammed electronically.
  • Low power consumption: Operates at a low voltage, making it energy-efficient.
  • High reliability: Offers robust performance and long-term data retention.
  • Small form factor: Comes in a compact package, suitable for space-constrained applications.

Package

AT24C16A-10TU-2.7 is available in a standard 8-pin TSSOP (Thin Shrink Small Outline Package) package.

Essence

The essence of this product lies in its ability to store and retrieve digital information reliably, even in the absence of power.

Packaging/Quantity

AT24C16A-10TU-2.7 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Memory capacity: 16 kilobits (2 kilobytes)
  • Operating voltage: 2.7V to 5.5V
  • Operating temperature range: -40°C to +85°C
  • Write cycle endurance: 1 million cycles
  • Data retention: Up to 100 years

Detailed Pin Configuration

The AT24C16A-10TU-2.7 chip has the following pin configuration:

  1. A0: Address input pin
  2. A1: Address input pin
  3. A2: Address input pin
  4. GND: Ground connection
  5. SDA: Serial data input/output
  6. SCL: Serial clock input
  7. WP: Write protect pin
  8. VCC: Power supply voltage

Functional Features

  • Random access: Allows reading and writing of specific memory locations.
  • Byte-level operations: Supports individual byte read/write operations.
  • I2C interface: Communicates using the widely-used I2C protocol.
  • Hardware write protection: Provides a write protect pin to prevent accidental modification of stored data.
  • Software write protection: Can be configured to protect specific memory areas through software commands.

Advantages and Disadvantages

Advantages

  • Non-volatile storage: Data remains intact even during power loss.
  • High endurance: Can withstand frequent write cycles without degradation.
  • Compact size: Suitable for space-constrained designs.
  • Low power consumption: Energy-efficient operation.
  • Wide operating voltage range: Compatible with various systems.

Disadvantages

  • Limited storage capacity: 16 kilobits may not be sufficient for certain applications requiring larger memory.
  • Relatively slow write speed: EEPROMs generally have slower write times compared to other memory technologies.

Working Principles

AT24C16A-10TU-2.7 utilizes an electrically erasable floating-gate transistor technology. It stores data by trapping charges in the floating gate, which can be later removed or added through electrical signals. The stored charge determines the logic state of each memory cell, allowing for reliable data storage and retrieval.

Detailed Application Field Plans

AT24C16A-10TU-2.7 finds application in various fields, including: 1. Microcontroller-based systems: Used for storing configuration settings, calibration data, and firmware updates. 2. Consumer electronics: Enables non-volatile storage of user preferences, device settings, and usage history. 3. Industrial automation: Stores critical parameters, sensor calibration data, and system configuration in control systems. 4. Automotive electronics: Used for storing vehicle-specific data, such as mileage, service history, and user preferences.

Detailed and Complete Alternative Models

Some alternative models to AT24C16A-10TU-2.7 include: 1. AT24C01A-10PU-2.7: 1 kilobit EEPROM with a DIP package. 2. AT24C32D-SSHM-T: 32 kilobit EEPROM with an SOIC package. 3. AT24CM02-SSHM-T: 2 megabit EEPROM with an SOIC package. 4. AT25080AN-10SU-2.7: 8 kilobit EEPROM with an SOP package.

These alternative models offer different memory capacities, package types, and features to suit specific application requirements.

Word count: 531 words

기술 솔루션에 AT24C16A-10TU-2.7 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of AT24C16A-10TU-2.7 in technical solutions:

  1. Q: What is AT24C16A-10TU-2.7? A: AT24C16A-10TU-2.7 is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by Microchip Technology. It has a capacity of 16 kilobits (2 kilobytes) and operates at a voltage of 2.7V.

  2. Q: What are some common applications of AT24C16A-10TU-2.7? A: AT24C16A-10TU-2.7 is commonly used in various electronic devices for storing small amounts of non-volatile data, such as configuration settings, calibration data, or user preferences.

  3. Q: How does AT24C16A-10TU-2.7 communicate with a microcontroller or other devices? A: AT24C16A-10TU-2.7 uses the I2C (Inter-Integrated Circuit) protocol for communication. It has a 2-wire serial interface consisting of a data line (SDA) and a clock line (SCL).

  4. Q: What is the maximum operating frequency of AT24C16A-10TU-2.7? A: The maximum operating frequency of AT24C16A-10TU-2.7 is 400 kHz.

  5. Q: Can AT24C16A-10TU-2.7 be used in both 3.3V and 5V systems? A: Yes, AT24C16A-10TU-2.7 is designed to work with both 3.3V and 5V systems, making it compatible with a wide range of microcontrollers and other devices.

  6. Q: How many bytes can be stored in AT24C16A-10TU-2.7? A: AT24C16A-10TU-2.7 has a capacity of 16 kilobits, which is equivalent to 2048 bytes.

  7. Q: Is AT24C16A-10TU-2.7 capable of random access or only sequential access? A: AT24C16A-10TU-2.7 supports both random and sequential access. It can read and write data at any specific memory address.

  8. Q: What is the typical write endurance of AT24C16A-10TU-2.7? A: The typical write endurance of AT24C16A-10TU-2.7 is specified as 1 million write cycles. This means that each memory location can be written to approximately 1 million times before it may start to degrade.

  9. Q: Does AT24C16A-10TU-2.7 have built-in hardware protection features? A: Yes, AT24C16A-10TU-2.7 includes built-in hardware write protection features that allow you to protect certain memory areas from accidental or unauthorized writes.

  10. Q: Can AT24C16A-10TU-2.7 operate over a wide temperature range? A: Yes, AT24C16A-10TU-2.7 is designed to operate reliably over a wide temperature range, typically from -40°C to +85°C.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.