AT24C16AN-10SU-2.7-T

Basic Information Overview

Category: Integrated Circuit (IC)

Use: Data storage and retrieval

Characteristics: - Non-volatile memory - Serial EEPROM (Electrically Erasable Programmable Read-Only Memory) - 16 kilobits (2 kilobytes) of memory capacity - Low power consumption - Wide operating voltage range (1.7V to 5.5V) - I2C (Inter-Integrated Circuit) compatible interface - 8-byte page write mode for faster data transfer - Write protect pin for data security

Package: SOIC (Small Outline Integrated Circuit)

Essence: The AT24C16AN-10SU-2.7-T is an integrated circuit that provides non-volatile memory storage and retrieval capabilities. It is commonly used in various electronic devices for storing configuration settings, user data, and other important information.

Packaging/Quantity: The AT24C16AN-10SU-2.7-T is typically sold in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

• Memory Capacity: 16 kilobits (2 kilobytes)
• Operating Voltage Range: 1.7V to 5.5V
• Interface: I2C (Inter-Integrated Circuit)
• Maximum Clock Frequency: 400 kHz
• Write Cycle Time: 10 ms (maximum)
• Data Retention: 100 years (minimum)
• Endurance: 1 million write cycles (minimum)

Detailed Pin Configuration

The AT24C16AN-10SU-2.7-T has a total of 8 pins, each serving a specific function:

1. A0: Address Input
2. A1: Address Input
3. A2: Address Input
4. GND: Ground
5. SDA: Serial Data Input/Output
6. SCL: Serial Clock Input
7. WP: Write Protect
8. VCC: Power Supply

Functional Features

• Non-volatile Memory: The AT24C16AN-10SU-2.7-T retains stored data even when power is removed.
• I2C Interface: Allows for easy integration with other devices supporting the I2C protocol.
• Low Power Consumption: Ideal for battery-powered applications, as it consumes minimal power during operation.
• Write Protect Pin: Provides a means to protect stored data from accidental modification or erasure.
• Page Write Mode: Enables faster data transfer by allowing up to 8 bytes of data to be written in a single operation.

Advantages and Disadvantages

Advantages: - Compact size and lightweight - Wide operating voltage range allows for compatibility with various systems - High data retention and endurance - Easy integration with other I2C-compatible devices - Low power consumption extends battery life

Disadvantages: - Limited memory capacity compared to larger EEPROMs - Slower write cycle time compared to some other memory technologies

Working Principles

The AT24C16AN-10SU-2.7-T utilizes an electrically erasable programmable read-only memory (EEPROM) technology. It stores data in a grid of memory cells that can be individually programmed or erased using electrical signals. The I2C interface facilitates communication between the IC and the host device, allowing for data read and write operations.

Detailed Application Field Plans

The AT24C16AN-10SU-2.7-T finds application in various electronic devices, including but not limited to: 1. Consumer electronics (e.g., TVs, set-top boxes, remote controls) 2. Automotive electronics (e.g., car audio systems, instrument clusters) 3. Industrial control systems (e.g., programmable logic controllers, data loggers) 4. Medical devices (e.g., patient monitoring systems, diagnostic equipment) 5. Smart home automation (e.g., smart thermostats, security systems)

Detailed and Complete Alternative Models

1. AT24C01A: 1 kilobit (128 bytes) capacity
2. AT24C02: 2 kilobits (256 bytes) capacity
3. AT24C04: 4 kilobits (512 bytes) capacity
4. AT24C08: 8 kilobits (1 kilobyte) capacity
5. AT24C32: 32 kilobits (4 kilobytes) capacity
6. AT24C64: 64 kilobits (8 kilobytes) capacity
7. AT24C128: 128 kilobits (16 kilobytes) capacity
8. AT24C256: 256 kilobits (32 kilobytes) capacity
9. AT24C512: 512 kilobits