AT24C16N-10SC

Product Overview

Category

AT24C16N-10SC belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This product is commonly used for storing and retrieving data in electronic devices. It provides non-volatile memory storage, allowing information to be retained even when power is removed.

Characteristics

• Electrically erasable: The AT24C16N-10SC can be erased and reprogrammed electronically, making it convenient for updating or modifying stored data.
• High storage capacity: This chip has a storage capacity of 16 kilobits, allowing for the storage of a significant amount of data.
• Low power consumption: The AT24C16N-10SC operates on low power, making it suitable for battery-powered devices.
• I2C interface: It utilizes the I2C (Inter-Integrated Circuit) protocol for communication with other devices.

Package

The AT24C16N-10SC comes in a small outline integrated circuit (SOIC) package. This package type offers compactness and ease of integration into various electronic systems.

Essence

The essence of the AT24C16N-10SC lies in its ability to provide reliable and non-volatile data storage in a compact form factor. It offers a cost-effective solution for applications that require moderate storage capacity.

Packaging/Quantity

The AT24C16N-10SC is typically packaged in reels or tubes, containing a specific quantity of chips per package. The exact packaging and quantity may vary depending on the manufacturer's specifications.

Specifications

• Storage capacity: 16 kilobits (2048 bytes)
• Operating voltage: 1.7V to 5.5V
• Operating temperature range: -40°C to +85°C
• Write cycle endurance: 1 million cycles
• Data retention: 100 years

Detailed Pin Configuration

The AT24C16N-10SC has a total of 8 pins, each serving a specific function:

1. A0: Address input pin for device addressing.
2. A1: Address input pin for device addressing.
3. A2: Address input pin for device addressing.
4. GND: Ground reference for the chip.
5. SDA: Serial data input/output pin for communication.
6. SCL: Serial clock input pin for synchronization.
7. WP: Write protect pin to enable/disable write operations.
8. VCC: Power supply voltage input.

Functional Features

• Random access: The AT24C16N-10SC allows random access to any memory location, enabling efficient data retrieval.
• Byte-level read/write: It supports byte-level read and write operations, providing flexibility in managing data.
• Hardware write protection: The WP pin can be used to protect the stored data from accidental modification.
• Sequential read mode: This chip offers a sequential read mode, allowing consecutive data retrieval without the need for repeated address selection.

Advantages and Disadvantages

Advantages

• Non-volatile storage: The data stored in the AT24C16N-10SC remains intact even when power is removed.
• Compact form factor: The small package size enables easy integration into various electronic devices.
• Low power consumption: It operates on low power, making it suitable for battery-powered applications.
• High endurance: The chip can withstand a large number of write cycles, ensuring long-term reliability.

Disadvantages

• Limited storage capacity: With a capacity of 16 kilobits, the AT24C16N-10SC may not be sufficient for applications requiring extensive data storage.
• Relatively slow write speed: Compared to other memory technologies, EEPROMs generally have slower write speeds.

Working Principles

The AT24C16N-10SC utilizes a floating-gate transistor structure to store data. When a write operation is performed, an electric charge is trapped in the floating gate, altering the transistor's behavior and storing the desired data. During read operations, the stored charge is measured, allowing the retrieval of the stored information.

Detailed Application Field Plans

The AT24C16N-10SC finds applications in various electronic devices and systems, including but not limited to: - Consumer electronics: Used for storing configuration settings, user preferences, and other non-volatile data in devices such as TVs, audio players, and digital cameras. - Industrial automation: Employed in control systems, sensors, and data loggers to store critical information and enable system functionality even during power outages. - Automotive electronics: Utilized for storing vehicle-specific data, such as mileage, service history, and user preferences, in electronic control units (ECUs) and onboard computers. - Medical devices: Integrated into medical equipment to store patient data, device configurations, and calibration information.

Detailed and Complete Alternative Models

1. AT