AT24C32A-10TU-2.7

Product Overview

Category

AT24C32A-10TU-2.7 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

The AT24C32A-10TU-2.7 chip is primarily used for non-volatile data storage in various electronic devices and systems.

Characteristics

• Non-volatile: The data stored in the chip remains intact even when power is removed.
• Electrically erasable: The chip allows for easy modification and erasure of stored data.
• Programmable: Users can write and update data on the chip as needed.
• High capacity: The AT24C32A-10TU-2.7 offers a storage capacity of 32 kilobits (4 kilobytes).
• Low power consumption: The chip operates at a low voltage and consumes minimal power.
• Wide operating temperature range: It can function reliably in temperatures ranging from -40°C to +85°C.

Package

The AT24C32A-10TU-2.7 chip is available in an 8-pin TSSOP (Thin Shrink Small Outline Package) package.

Essence

The essence of the AT24C32A-10TU-2.7 chip lies in its ability to provide reliable, non-volatile data storage in a compact and energy-efficient form.

Packaging/Quantity

The AT24C32A-10TU-2.7 chip is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of chips. The exact packaging and quantity may vary depending on the supplier.

Specifications

• Memory Capacity: 32 kilobits (4 kilobytes)
• Operating Voltage: 1.7V to 5.5V
• Maximum Clock Frequency: 400 kHz
• Write Cycle Time: 5 ms (maximum)
• Data Retention: 100 years (minimum)
• Package Type: 8-pin TSSOP

Detailed Pin Configuration

The AT24C32A-10TU-2.7 chip has the following pin configuration:

1. A0: Chip Address Input
2. A1: Chip Address Input
3. A2: Chip Address Input
4. GND: Ground
5. SDA: Serial Data Input/Output
6. SCL: Serial Clock Input
7. WP: Write Protect
8. VCC: Power Supply

Functional Features

1. Non-volatile Data Storage

The AT24C32A-10TU-2.7 chip offers non-volatile storage, ensuring that data remains intact even when power is removed.

2. Easy Data Modification

Users can easily modify and update stored data on the chip using standard serial communication protocols.

3. Low Power Consumption

The chip operates at a low voltage and consumes minimal power, making it suitable for battery-powered devices.

4. High Reliability

With a wide operating temperature range and long data retention period, the AT24C32A-10TU-2.7 chip provides high reliability in various environmental conditions.

Advantages and Disadvantages

Advantages

• Non-volatile data storage ensures data integrity.
• Easy to program and update data.
• Low power consumption extends battery life.
• Wide operating temperature range enhances versatility.
• Compact package size saves board space.

Disadvantages

• Limited storage capacity compared to other memory options.
• Slower write cycle time may impact performance in certain applications.

Working Principles

The AT24C32A-10TU-2.7 chip utilizes an electrically erasable programmable read-only memory (EEPROM) technology. It stores data in a grid of memory cells, with each cell capable of holding one bit of information. The chip communicates with the host system using a serial interface, allowing for easy reading and writing of data.

Detailed Application Field Plans

The AT24C32A-10TU-2.7 chip finds applications in various electronic devices and systems, including but not limited to: - Consumer electronics: Smartphones, tablets, digital cameras. - Automotive: Engine control units, infotainment systems. - Industrial automation: Programmable logic controllers, sensors. - Medical devices: Patient monitoring systems, diagnostic equipment. - Internet of Things (IoT): Smart home devices, wearable technology.

Detailed and Complete Alternative Models

1. AT24C01A-10PU-2.7: 1 kilobit (128 bytes) capacity, DIP package.
2. AT24C64C-SSHM-T: 64 kilobits (8 kilobytes) capacity, SOIC package.
3. AT24CM02-SSHM-T: 2 megabits (256 kilobytes)