AT24C32AN-10SI-1.8-T
Product Overview
Category
AT24C32AN-10SI-1.8-T belongs to the category of EEPROM (Electrically Erasable Programmable Read-Only Memory) chips.
Use
This product is commonly used for non-volatile data storage in various electronic devices such as microcontrollers, computers, and consumer electronics.
Characteristics
- Non-volatile memory: The stored data remains intact even when power is removed.
- Electrically erasable: Data can be erased and reprogrammed electronically.
- High storage capacity: The AT24C32AN-10SI-1.8-T has a storage capacity of 32 kilobits (4 kilobytes).
- Low power consumption: It operates at a low voltage of 1.8V, making it suitable for battery-powered devices.
- I2C interface: It communicates using the I2C (Inter-Integrated Circuit) protocol.
Package
The AT24C32AN-10SI-1.8-T comes in an SOIC (Small Outline Integrated Circuit) package.
Essence
The essence of this product lies in its ability to provide reliable and non-volatile data storage in a compact form factor.
Packaging/Quantity
The AT24C32AN-10SI-1.8-T is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
Specifications
- Memory Capacity: 32 kilobits (4 kilobytes)
- Operating Voltage: 1.8V
- Interface: I2C
- Maximum Clock Frequency: 400 kHz
- Write Cycle Time: 5 ms (maximum)
- Data Retention: 100 years (minimum)
Detailed Pin Configuration
The AT24C32AN-10SI-1.8-T has a total of 8 pins, which are as follows:
- A0: Address Input
- A1: Address Input
- A2: Address Input
- GND: Ground
- SDA: Serial Data Input/Output
- SCL: Serial Clock Input
- WP: Write Protect
- VCC: Power Supply
Functional Features
- Random Access: Allows reading and writing data at any memory location.
- Page Write: Supports writing multiple bytes of data in a single write operation.
- Software Write Protection: Provides the option to protect specific memory areas from being overwritten.
- Hardware Write Protection: Allows the entire memory to be write-protected using the WP pin.
Advantages and Disadvantages
Advantages
- Non-volatile storage ensures data integrity even during power loss.
- Low power consumption makes it suitable for battery-powered devices.
- Compact form factor enables integration into various electronic devices.
- I2C interface simplifies communication with other components.
Disadvantages
- Limited storage capacity compared to other memory technologies.
- Relatively slower write cycle time compared to some alternatives.
Working Principles
The AT24C32AN-10SI-1.8-T utilizes EEPROM technology, which allows for electrically erasing and reprogramming data. It uses an I2C interface to communicate with the host device. The memory is organized into multiple pages, and data can be written or read at any address within the memory array. The chip operates at a low voltage of 1.8V, ensuring compatibility with a wide range of electronic systems.
Detailed Application Field Plans
The AT24C32AN-10SI-1.8-T finds applications in various fields, including but not limited to: - Embedded systems - Industrial automation - Automotive electronics - Smart home devices - Wearable technology
Detailed and Complete Alternative Models
Some alternative models to the AT24C32AN-10SI-1.8-T include: - AT24C02: 2 kilobits (256 bytes) capacity - AT24C64: 64 kilobits (8 kilobytes) capacity - AT24C128: 128 kilobits (16 kilobytes) capacity - AT24C256: 256 kilobits (32 kilobytes) capacity
These alternatives offer different storage capacities to suit specific application requirements.
Word count: 436 words
기술 솔루션에 AT24C32AN-10SI-1.8-T 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of AT24C32AN-10SI-1.8-T in technical solutions:
Q1: What is the AT24C32AN-10SI-1.8-T? A1: The AT24C32AN-10SI-1.8-T is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip with a capacity of 32 kilobits (4 kilobytes). It operates at a voltage of 1.8V.
Q2: What are the typical applications of AT24C32AN-10SI-1.8-T? A2: The AT24C32AN-10SI-1.8-T is commonly used in various electronic devices such as smart cards, industrial control systems, medical equipment, and automotive electronics.
Q3: How does the AT24C32AN-10SI-1.8-T communicate with other devices? A3: The AT24C32AN-10SI-1.8-T uses the I2C (Inter-Integrated Circuit) protocol for communication. It has a 2-wire serial interface consisting of a data line (SDA) and a clock line (SCL).
Q4: What is the maximum operating frequency of the AT24C32AN-10SI-1.8-T? A4: The AT24C32AN-10SI-1.8-T can operate at a maximum frequency of 400 kHz.
Q5: Can the AT24C32AN-10SI-1.8-T be used in both read and write operations? A5: Yes, the AT24C32AN-10SI-1.8-T supports both read and write operations. It allows data to be written and read from its memory cells.
Q6: What is the endurance of the AT24C32AN-10SI-1.8-T? A6: The AT24C32AN-10SI-1.8-T has a typical endurance of 1 million write cycles. This means that it can be written to and erased up to 1 million times before it may start to degrade.
Q7: Does the AT24C32AN-10SI-1.8-T have any built-in security features? A7: No, the AT24C32AN-10SI-1.8-T does not have any built-in security features. It is a standard EEPROM chip without any encryption or protection mechanisms.
Q8: What is the operating temperature range of the AT24C32AN-10SI-1.8-T? A8: The AT24C32AN-10SI-1.8-T has an operating temperature range of -40°C to +85°C.
Q9: Can the AT24C32AN-10SI-1.8-T operate at voltages other than 1.8V? A9: No, the AT24C32AN-10SI-1.8-T is specifically designed to operate at a voltage of 1.8V. Operating it at higher voltages may damage the chip.
Q10: Is the AT24C32AN-10SI-1.8-T RoHS compliant? A10: Yes, the AT24C32AN-10SI-1.8-T is RoHS (Restriction of Hazardous Substances) compliant, which means it meets the environmental standards set by the European Union.
Please note that these answers are based on general information about the AT24C32AN-10SI-1.8-T and may vary depending on specific implementations and requirements.