이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
AT24C64AW-10SI-2.7

AT24C64AW-10SI-2.7

Product Overview

Category

AT24C64AW-10SI-2.7 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This product is commonly used for storing and retrieving data in electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile memory: The stored data remains intact even when power is removed.
  • High storage capacity: The AT24C64AW-10SI-2.7 has a capacity of 64 kilobits (8 kilobytes).
  • Low power consumption: It operates at a low voltage and consumes minimal power.
  • Fast write and read speeds: The chip supports high-speed data transfer.
  • Reliable performance: It offers excellent data retention and endurance.

Package

The AT24C64AW-10SI-2.7 is available in an 8-pin Small Outline Integrated Circuit (SOIC) package.

Essence

This EEPROM chip allows for non-volatile data storage and retrieval in various electronic devices.

Packaging/Quantity

The AT24C64AW-10SI-2.7 is typically sold in reels or tubes, with each reel/tube containing a specific quantity of chips. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

  • Operating voltage: 1.7V to 5.5V
  • Operating temperature range: -40°C to +85°C
  • Write cycle time: 10 ms (maximum)
  • Data retention: 100 years (minimum)
  • I2C-compatible interface
  • 64-byte page write mode for efficient programming

Detailed Pin Configuration

The AT24C64AW-10SI-2.7 features the following pin configuration:

  1. A0: Chip address input pin
  2. A1: Chip address input pin
  3. A2: Chip address input pin
  4. GND: Ground connection
  5. SDA: Serial data input/output pin
  6. SCL: Serial clock input pin
  7. WP: Write protect pin (optional)
  8. VCC: Power supply voltage

Functional Features

  • Random access: Allows for reading and writing data at any memory location.
  • Byte-level operations: Supports individual byte read and write operations.
  • Page-level operations: Enables efficient programming of multiple bytes within a page.
  • Hardware write protection: The WP pin can be used to protect the memory from accidental writes.

Advantages and Disadvantages

Advantages

  • Non-volatile storage: Data remains intact even during power loss.
  • High storage capacity: Offers ample space for storing data.
  • Low power consumption: Operates efficiently with minimal power requirements.
  • Fast data transfer: Supports high-speed read and write operations.
  • Reliable performance: Provides excellent data retention and endurance.

Disadvantages

  • Limited rewrite cycles: EEPROMs have a finite number of write cycles before they may become unreliable.
  • Relatively small storage compared to other memory types: May not be suitable for applications requiring large amounts of data storage.

Working Principles

The AT24C64AW-10SI-2.7 utilizes an I2C-compatible interface to communicate with the host device. It stores data in a grid of memory cells, each capable of holding one bit of information. These cells can be electrically programmed and erased using specific voltage levels. The chip's control logic allows for random access to any memory location, enabling efficient data retrieval and modification.

Detailed Application Field Plans

The AT24C64AW-10SI-2.7 finds application in various fields, including:

  1. Embedded systems: Used for storing configuration data, firmware updates, and user settings in microcontrollers.
  2. Consumer electronics: Employed in devices like smart TVs, set-top boxes, and digital cameras for data storage purposes.
  3. Industrial automation: Utilized in control systems and sensors to store calibration data and device parameters.
  4. Automotive electronics: Integrated into vehicles for storing critical information, such as engine management data and vehicle settings.

Detailed and Complete Alternative Models

  1. AT24C01A: 1 kilobit (128 bytes) EEPROM chip.
  2. AT24C256C: 256 kilobits (32 kilobytes) EEPROM chip.
  3. AT24CM02: 2 megabits (256 kilobytes) EEPROM chip.
  4. AT24MAC602: 64 kilobits (8 kilobytes) EEPROM chip with a unique MAC address.

These alternative models offer different storage capacities and features, allowing users to choose the most suitable option for their specific requirements.

In conclusion, the AT24C64AW-10SI-2.7 is an electrically erasable programmable read-only memory chip that provides non-volatile data storage and

기술 솔루션에 AT24C64AW-10SI-2.7 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of AT24C64AW-10SI-2.7 in technical solutions:

  1. Q: What is the AT24C64AW-10SI-2.7? A: The AT24C64AW-10SI-2.7 is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip with a capacity of 64 kilobits (8 kilobytes).

  2. Q: What are the typical applications of AT24C64AW-10SI-2.7? A: The AT24C64AW-10SI-2.7 is commonly used for storing configuration data, calibration values, or small amounts of non-volatile memory in various electronic devices.

  3. Q: What is the operating voltage range of AT24C64AW-10SI-2.7? A: The AT24C64AW-10SI-2.7 operates within a voltage range of 1.7V to 5.5V.

  4. Q: How does AT24C64AW-10SI-2.7 communicate with a microcontroller? A: The AT24C64AW-10SI-2.7 uses the I2C (Inter-Integrated Circuit) protocol for communication with a microcontroller.

  5. Q: What is the maximum clock frequency supported by AT24C64AW-10SI-2.7? A: The AT24C64AW-10SI-2.7 supports a maximum clock frequency of 400 kHz.

  6. Q: Can AT24C64AW-10SI-2.7 be used in automotive applications? A: Yes, the AT24C64AW-10SI-2.7 is qualified for automotive applications and can withstand the required temperature and environmental conditions.

  7. Q: Does AT24C64AW-10SI-2.7 have built-in write protection? A: Yes, the AT24C64AW-10SI-2.7 has a built-in write protection feature that allows you to protect specific memory areas from being overwritten.

  8. Q: What is the typical endurance of AT24C64AW-10SI-2.7? A: The AT24C64AW-10SI-2.7 has a typical endurance of 1 million write cycles.

  9. Q: Can AT24C64AW-10SI-2.7 retain data during power loss? A: Yes, the AT24C64AW-10SI-2.7 is non-volatile, meaning it can retain data even when power is lost.

  10. Q: Are there any limitations on the number of read or write operations in a single I2C transaction? A: Yes, the AT24C64AW-10SI-2.7 has a page size of 32 bytes, which means that a maximum of 32 bytes can be read or written in a single I2C transaction.

Please note that these answers are based on general knowledge about the AT24C64AW-10SI-2.7 and may vary depending on the specific implementation and datasheet of the device.