AT25128N-10SC
Product Overview
Category
AT25128N-10SC belongs to the category of non-volatile memory integrated circuits.
Use
It is primarily used for data storage in various electronic devices such as microcontrollers, computers, and consumer electronics.
Characteristics
- Non-volatile: Retains stored data even when power is disconnected.
- High storage capacity: The AT25128N-10SC has a storage capacity of 128 kilobits.
- Low power consumption: Designed to operate with minimal power requirements.
- Fast access time: Provides quick access to stored data.
- Durable: Can withstand harsh environmental conditions.
Package
The AT25128N-10SC is available in a small outline package (SOIC) format.
Essence
The essence of AT25128N-10SC lies in its ability to reliably store and retrieve data in a compact and efficient manner.
Packaging/Quantity
The product is typically packaged in reels or tubes, with each containing a specific quantity of AT25128N-10SC chips.
Specifications
- Memory Capacity: 128 kilobits
- Interface: Serial Peripheral Interface (SPI)
- Operating Voltage: 2.7V - 5.5V
- Operating Temperature Range: -40°C to +85°C
- Data Retention: Up to 100 years
- Write Endurance: 1 million write cycles
Pin Configuration
The AT25128N-10SC features an 8-pin configuration:
- Chip Select (/CS)
- Serial Clock (SCK)
- Serial Data Input (SI)
- Serial Data Output (SO)
- Write Protect (/WP)
- VCC (Power Supply)
- Ground (GND)
- Hold (/HOLD)
Functional Features
- Byte and Page-level Read and Write Operations
- Software and Hardware Protection of Stored Data
- Sequential Read Mode for Efficient Data Retrieval
- Chip Erase and Write Protect Functions
Advantages and Disadvantages
Advantages
- High storage capacity in a compact form factor
- Low power consumption, suitable for battery-powered devices
- Fast access time for quick data retrieval
- Durable design for reliable operation in various environments
Disadvantages
- Limited storage capacity compared to other memory technologies
- Relatively slower write speeds compared to volatile memory
Working Principles
The AT25128N-10SC utilizes the Serial Peripheral Interface (SPI) protocol to communicate with the host device. It stores data in non-volatile memory cells that retain their state even when power is disconnected. The chip can be accessed and controlled using specific commands sent through the SPI interface.
Detailed Application Field Plans
The AT25128N-10SC finds applications in various fields, including: 1. Embedded Systems: Used for program storage in microcontrollers and system-on-chip devices. 2. Automotive Electronics: Stores configuration data and firmware in automotive control units. 3. Industrial Automation: Enables data logging and parameter storage in industrial control systems. 4. Consumer Electronics: Used in devices like smart TVs, set-top boxes, and gaming consoles for data storage.
Alternative Models
Several alternative models with similar functionality to the AT25128N-10SC include: - AT25256A-10PU - AT25320B-SSHL-T - AT25640B-SSHL-T
These models offer different storage capacities, package types, or additional features while maintaining compatibility with the same interface and pin configuration.
Word count: 520 words
기술 솔루션에 AT25128N-10SC 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of AT25128N-10SC in technical solutions:
Q: What is AT25128N-10SC? A: AT25128N-10SC is a specific model of Serial EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by Atmel.
Q: What is the storage capacity of AT25128N-10SC? A: The AT25128N-10SC has a storage capacity of 128 kilobits, which is equivalent to 16 kilobytes.
Q: What is the operating voltage range for AT25128N-10SC? A: The operating voltage range for AT25128N-10SC is typically between 1.8V and 5.5V.
Q: What is the maximum clock frequency supported by AT25128N-10SC? A: The maximum clock frequency supported by AT25128N-10SC is 10 MHz.
Q: Can AT25128N-10SC be used in automotive applications? A: Yes, AT25128N-10SC is designed to meet the requirements of automotive applications and can operate in harsh environments.
Q: Does AT25128N-10SC support both read and write operations? A: Yes, AT25128N-10SC supports both read and write operations, allowing data to be stored and retrieved from the memory.
Q: Is AT25128N-10SC compatible with I2C interface? A: Yes, AT25128N-10SC uses the I2C (Inter-Integrated Circuit) interface for communication with other devices.
Q: What is the typical endurance of AT25128N-10SC? A: The typical endurance of AT25128N-10SC is 1 million write cycles, meaning it can be written to and erased multiple times.
Q: Can AT25128N-10SC retain data without power supply? A: Yes, AT25128N-10SC has built-in non-volatile memory, which means it can retain data even when the power supply is disconnected.
Q: Are there any specific programming requirements for AT25128N-10SC? A: Yes, AT25128N-10SC requires specific programming commands and protocols to read from or write to the memory, which are detailed in the datasheet provided by Atmel.
Please note that these answers are general and may vary depending on the specific application and implementation of AT25128N-10SC. It is always recommended to refer to the official documentation and consult with technical experts for accurate information.