AT25128T2-10TI-1.8

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Non-volatile Memory
• Characteristics: High-speed, Low-power, Serial EEPROM
• Package: 8-lead TDFN (Thin Dual Flat No-leads) package
• Essence: Stores and retrieves digital information even when power is turned off
• Packaging/Quantity: Available in tape and reel packaging, quantity varies

Specifications

• Part Number: AT25128T2-10TI-1.8
• Memory Size: 128 Kilobits (16 Kilobytes)
• Interface: Serial Peripheral Interface (SPI)
• Operating Voltage: 1.8V
• Speed: Up to 10 MHz
• Endurance: 1 Million Write Cycles
• Data Retention: 100 Years
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The AT25128T2-10TI-1.8 has the following pin configuration:

| Pin Name | Description | |----------|-------------| | CS | Chip Select | | SCK | Serial Clock | | SI | Serial Input | | SO | Serial Output | | VCC | Power Supply (1.8V) | | GND | Ground |

Functional Features

• High-speed data transfer using SPI interface
• Low power consumption for efficient operation
• Non-volatile memory retains data even without power
• Reliable and durable with high endurance and long data retention period

Advantages

• Compact size and lightweight design
• Easy integration into various electronic devices
• Wide operating temperature range allows usage in extreme environments
• High-speed data transfer enables quick access to stored information

Disadvantages

• Limited storage capacity compared to other memory options
• Requires an external microcontroller or host device for data retrieval and storage

Working Principles

The AT25128T2-10TI-1.8 is a Serial EEPROM that utilizes the SPI interface to communicate with a microcontroller or host device. It stores digital information in non-volatile memory cells, which retain data even when power is turned off. The chip select (CS), serial clock (SCK), serial input (SI), and serial output (SO) pins are used to control data transfer between the device and the host.

Detailed Application Field Plans

The AT25128T2-10TI-1.8 is commonly used in various electronic devices and systems, including: - Consumer electronics (e.g., smartphones, tablets, digital cameras) - Automotive electronics (e.g., infotainment systems, engine control units) - Industrial automation (e.g., programmable logic controllers, sensors) - Medical devices (e.g., patient monitoring systems, diagnostic equipment)

Detailed and Complete Alternative Models

• AT25080B-SSHL-T: 8 Kilobit (1 Kilobyte) Serial EEPROM, 2.7V to 5.5V operating voltage range
• AT25256A-10PI-2.7: 256 Kilobit (32 Kilobytes) Serial EEPROM, 2.7V to 5.5V operating voltage range
• AT25320A-10TU-2.7: 32 Kilobit (4 Kilobytes) Serial EEPROM, 2.7V to 5.5V operating voltage range

(Note: The above alternative models are provided as examples and may not cover all available options.)

This entry provides an overview of the AT25128T2-10TI-1.8, a high-speed, low-power Serial EEPROM integrated circuit. It includes basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.