Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
AT25160A-10PU-1.8
자세히보기 데이터시트

AT25160A-10PU-1.8

Product Overview

Category

AT25160A-10PU-1.8 belongs to the category of Serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chips.

Use

It is used for non-volatile storage of data in various electronic devices such as consumer electronics, automotive systems, and industrial applications.

Characteristics

  • Non-volatile memory
  • Serial interface
  • Low power consumption
  • High reliability
  • Small package size

Package

The AT25160A-10PU-1.8 is typically available in a small form factor package suitable for surface mount technology.

Essence

The essence of AT25160A-10PU-1.8 lies in its ability to provide reliable and non-volatile data storage in a compact and energy-efficient manner.

Packaging/Quantity

The AT25160A-10PU-1.8 is commonly supplied in tape and reel packaging with quantities varying based on the manufacturer's specifications.

Specifications

  • Memory Size: 16 Kbits (2 Kbytes)
  • Interface: SPI (Serial Peripheral Interface)
  • Operating Voltage: 1.8V
  • Speed: 10 MHz
  • Endurance: 1,000,000 write cycles
  • Data Retention: 100 years

Detailed Pin Configuration

The AT25160A-10PU-1.8 features a standard 8-pin configuration: 1. Chip Select (/CS) 2. Serial Clock (SCK) 3. Serial Data Input/Output (SI/O) 4. Ground (GND) 5. Write Protect (/WP) 6. VCC Power Supply 7. Serial Data Out (SO) 8. Hold (/HOLD)

Functional Features

  • Byte and Page Write Modes
  • Self-timed Write Cycle
  • Enhanced ESD Protection
  • Software and Hardware Write Protection
  • Sequential Read Operation

Advantages

  • Low power consumption extends battery life in portable devices
  • Compact package size saves board space
  • High reliability ensures data integrity
  • Flexible write protection options for enhanced security

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Slower write speeds compared to volatile memory types

Working Principles

The AT25160A-10PU-1.8 operates by utilizing the SPI protocol to communicate with the host system. It stores and retrieves data through a series of read and write operations, while incorporating mechanisms for write protection and error correction.

Detailed Application Field Plans

The AT25160A-10PU-1.8 finds application in a wide range of fields including: - Automotive: for storing vehicle configuration data and fault codes - Consumer Electronics: in smart home devices and wearables - Industrial Control Systems: for parameter storage and firmware updates

Detailed and Complete Alternative Models

Some alternative models to AT25160A-10PU-1.8 include: - AT25256A-10PU-1.8: Higher capacity variant from the same series - CAT25C128: Competing product with similar specifications - 24LC16B: Alternative from a different manufacturer with compatible interface

In conclusion, the AT25160A-10PU-1.8 offers a reliable and efficient solution for non-volatile data storage in various electronic applications, despite its limitations in capacity and write speed.

[Word count: 496]

기술 솔루션에 AT25160A-10PU-1.8 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the AT25160A-10PU-1.8?

    • The AT25160A-10PU-1.8 is a 16K (2K x 8) serial EEPROM with a wide voltage range and high-speed performance, commonly used in various technical solutions.

  2. What are the typical applications of AT25160A-10PU-1.8?

    • It is commonly used in applications such as automotive systems, industrial control, medical devices, and consumer electronics for data storage and parameter settings.

  3. What is the operating voltage range of AT25160A-10PU-1.8?

    • The operating voltage range is from 1.8V to 5.5V, making it suitable for low-power and battery-operated devices.

  4. What is the maximum clock frequency supported by AT25160A-10PU-1.8?

    • It supports a maximum clock frequency of 20 MHz, enabling high-speed data transfer in various applications.

  5. Can AT25160A-10PU-1.8 be used in automotive applications?

    • Yes, it is suitable for automotive applications due to its wide voltage range, high reliability, and resistance to harsh environmental conditions.

  6. How can AT25160A-10PU-1.8 be interfaced with microcontrollers?

    • It can be interfaced using SPI (Serial Peripheral Interface) protocol, providing a simple and efficient communication interface.

  7. What are the key features of AT25160A-10PU-1.8 for industrial control applications?

    • Its high endurance, wide voltage range, and reliable performance make it well-suited for storing configuration parameters and data logging in industrial control systems.

  8. Is AT25160A-10PU-1.8 suitable for portable medical devices?

    • Yes, its low power consumption, small form factor, and wide voltage range make it ideal for use in portable medical devices for storing patient data and device settings.

  9. What are the advantages of using AT25160A-10PU-1.8 in consumer electronics?

    • It offers non-volatile data storage, low power consumption, and high-speed operation, making it suitable for applications such as smart home devices and wearable technology.

  10. Are there any specific design considerations when integrating AT25160A-10PU-1.8 into a technical solution?

    • Designers should consider factors such as voltage regulation, ESD protection, and signal integrity to ensure reliable operation and data integrity in the application.