이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
AT25160AN-10SU-2.7

AT25160AN-10SU-2.7

Product Overview

Category

AT25160AN-10SU-2.7 belongs to the category of Serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chips.

Use

This product is commonly used for non-volatile storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile memory: The data stored in AT25160AN-10SU-2.7 is retained even when power is removed.
  • High storage capacity: This chip has a storage capacity of 16 kilobits (2 kilobytes).
  • Serial interface: It utilizes a serial communication protocol for data transfer.
  • Low power consumption: AT25160AN-10SU-2.7 operates at low power levels, making it suitable for battery-powered devices.

Package

AT25160AN-10SU-2.7 is available in a small outline package (SOP) format.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile storage for electronic devices, ensuring data integrity even during power cycles.

Packaging/Quantity

AT25160AN-10SU-2.7 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Operating voltage: 2.7V to 5.5V
  • Operating temperature range: -40°C to +85°C
  • Write endurance: 1 million cycles
  • Data retention: 100 years
  • Interface: SPI (Serial Peripheral Interface)
  • Clock frequency: Up to 10 MHz

Detailed Pin Configuration

The AT25160AN-10SU-2.7 chip has a total of 8 pins, which are assigned specific functions:

  1. Chip Select (CS): Used to enable/disable the chip for communication.
  2. Serial Clock (SCK): Provides the clock signal for data transfer.
  3. Serial Data Input (SI): Used to input data into the chip.
  4. Serial Data Output (SO): Outputs data from the chip.
  5. Write Protect (WP): Enables or disables write protection for the memory.
  6. VCC: Power supply voltage.
  7. Ground (GND): Ground reference.
  8. Hold (HOLD): Pauses ongoing operations without resetting the chip.

Functional Features

  • Byte and Page Write: AT25160AN-10SU-2.7 supports both byte-level and page-level write operations, allowing flexible data storage.
  • Sequential Read: It enables sequential reading of data, reducing access time.
  • Software Protection: The chip provides software-based write protection to prevent unauthorized modifications.
  • Self-timed Programming Cycle: AT25160AN-10SU-2.7 automatically manages programming cycles, simplifying the writing process.

Advantages and Disadvantages

Advantages

  • Non-volatile storage ensures data integrity.
  • Compact package size suitable for space-constrained applications.
  • Low power consumption extends battery life.
  • High endurance and long data retention period.
  • Easy integration with various microcontrollers and electronic devices.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Slower write speeds compared to some alternative models.
  • Vulnerable to electromagnetic interference (EMI) due to its serial interface.

Working Principles

AT25160AN-10SU-2.7 utilizes EEPROM technology, which allows for electrically erasing and reprogramming of data. It stores information in a grid of memory cells, where each cell represents a bit of data. The data can be written or read using a serial communication protocol, such as SPI. The chip's internal circuitry manages the programming and erasing of data, ensuring reliable and accurate storage.

Detailed Application Field Plans

AT25160AN-10SU-2.7 finds applications in various fields, including: 1. Automotive electronics: Used for storing vehicle configuration data, mileage records, and firmware updates. 2. Industrial automation: Utilized for parameter storage, device calibration, and data logging. 3. Consumer electronics: Integrated into smart devices, wearables, and IoT devices for data storage and firmware updates. 4. Medical devices: Employed for storing patient information, device settings, and event logs.

Detailed and Complete Alternative Models

  1. AT25256AN-10SU-2.7: Similar to AT25160AN-10SU-2.7 but with a higher storage capacity of 32 kilobits (4 kilobytes).
  2. AT25080AN-10SU-2.7: A lower capacity alternative with 8 kilobits (1 kilobyte) of storage.
  3. AT25320AN-10SU-2.7: Offers double the storage capacity of AT25160AN-10SU-2.7, with

기술 솔루션에 AT25160AN-10SU-2.7 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of AT25160AN-10SU-2.7 in technical solutions:

  1. Q: What is the AT25160AN-10SU-2.7? A: The AT25160AN-10SU-2.7 is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) with a capacity of 16 kilobits (2 kilobytes).

  2. Q: What are the typical applications of AT25160AN-10SU-2.7? A: The AT25160AN-10SU-2.7 is commonly used in various electronic devices, such as automotive systems, industrial control systems, consumer electronics, and medical equipment.

  3. Q: How does the AT25160AN-10SU-2.7 connect to a microcontroller or other devices? A: The AT25160AN-10SU-2.7 uses a standard SPI (Serial Peripheral Interface) protocol for communication, which allows it to be easily connected to microcontrollers or other devices.

  4. Q: What is the operating voltage range of the AT25160AN-10SU-2.7? A: The AT25160AN-10SU-2.7 operates within a voltage range of 1.8V to 5.5V, making it compatible with a wide range of systems.

  5. Q: Can the AT25160AN-10SU-2.7 be reprogrammed multiple times? A: Yes, the AT25160AN-10SU-2.7 can be reprogrammed multiple times, allowing for flexibility in storing and updating data.

  6. Q: What is the maximum data transfer rate supported by the AT25160AN-10SU-2.7? A: The AT25160AN-10SU-2.7 supports a maximum data transfer rate of 10 MHz, ensuring fast and efficient communication.

  7. Q: Does the AT25160AN-10SU-2.7 have any built-in security features? A: Yes, the AT25160AN-10SU-2.7 includes hardware write protection, which allows you to protect specific memory areas from being modified.

  8. Q: Can the AT25160AN-10SU-2.7 operate in extreme temperature conditions? A: Yes, the AT25160AN-10SU-2.7 is designed to operate within a wide temperature range, typically from -40°C to +85°C.

  9. Q: What is the typical endurance of the AT25160AN-10SU-2.7? A: The AT25160AN-10SU-2.7 has a typical endurance of 1 million write cycles, ensuring long-term reliability.

  10. Q: Is there any additional documentation available for the AT25160AN-10SU-2.7? A: Yes, you can refer to the datasheet provided by the manufacturer for detailed information on the AT25160AN-10SU-2.7's specifications, pinout, and programming instructions.

Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It is always recommended to consult the official documentation and datasheet for accurate and up-to-date information.