Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
AT25F512N-10SI-2.7
자세히보기 데이터시트

AT25F512N-10SI-2.7

Product Overview

Category

AT25F512N-10SI-2.7 belongs to the category of Serial Flash Memory.

Use

This product is primarily used for storing and retrieving digital data in electronic devices such as microcontrollers, embedded systems, and consumer electronics.

Characteristics

  • Non-volatile memory: The AT25F512N-10SI-2.7 retains stored data even when power is removed.
  • High storage capacity: With a capacity of 512 kilobits (64 kilobytes), it offers ample space for data storage.
  • Serial interface: It utilizes a serial communication protocol for data transfer, making it compatible with various microcontrollers and systems.
  • Low power consumption: The AT25F512N-10SI-2.7 operates efficiently, consuming minimal power during read and write operations.
  • Fast access time: It provides quick access to stored data, ensuring efficient data retrieval.

Package and Quantity

The AT25F512N-10SI-2.7 is available in a small outline integrated circuit (SOIC) package. It is typically sold in reels containing multiple units.

Essence

The essence of AT25F512N-10SI-2.7 lies in its ability to provide reliable and high-capacity non-volatile memory storage in a compact form factor.

Specifications

  • Manufacturer: Atmel Corporation
  • Part Number: AT25F512N-10SI-2.7
  • Memory Type: Serial Flash
  • Capacity: 512 kilobits (64 kilobytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Supply Voltage: 2.7V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Data Retention: 20 years
  • Endurance: 100,000 write cycles

Detailed Pin Configuration

The AT25F512N-10SI-2.7 features an 8-pin SOIC package with the following pin configuration:

  1. Chip Select (/CS)
  2. Serial Clock (SCK)
  3. Serial Data Input/Output (SI/SO)
  4. Write Protect (/WP)
  5. Hold (/HOLD)
  6. Ground (GND)
  7. Supply Voltage (VCC)
  8. Reset (RESET)

Functional Features

  • Fast Read Operation: The AT25F512N-10SI-2.7 allows for high-speed data retrieval, enabling efficient read operations.
  • Flexible Write Modes: It supports various write modes, including byte/page programming and sector/block erasing, providing flexibility in data storage and modification.
  • Software Protection: The device offers software protection mechanisms to prevent unauthorized access or modification of stored data.
  • Hardware Write Protection: The /WP pin can be used to enable hardware write protection, ensuring the integrity of stored data.
  • Deep Power-Down Mode: The AT25F512N-10SI-2.7 features a low-power deep power-down mode, reducing power consumption when the device is not in use.

Advantages and Disadvantages

Advantages

  • High storage capacity for data-intensive applications.
  • Low power consumption, making it suitable for battery-powered devices.
  • Fast access time for quick data retrieval.
  • Flexible write modes for versatile data storage and modification.
  • Software and hardware protection mechanisms for data security.

Disadvantages

  • Limited endurance of 100,000 write cycles.
  • Requires a compatible serial interface for communication.

Working Principles

The AT25F512N-10SI-2.7 utilizes the Serial Peripheral Interface (SPI) protocol for communication with the host microcontroller or system. It stores data in non-volatile memory cells, which retain information even when power is removed. The device can be accessed and controlled through specific commands sent via the SPI interface.

Detailed Application Field Plans

The AT25F512N-10SI-2.7 finds applications in various fields, including: 1. Microcontroller-based systems 2. Embedded systems 3. Consumer electronics 4. Automotive electronics 5. Industrial automation

In microcontroller-based systems, it can be used for firmware storage, configuration data storage, or as a boot memory. In embedded systems, it enables data logging, parameter storage, or firmware updates. Consumer electronics, such as smart TVs or set-top boxes, can utilize it for storing user preferences or firmware. Automotive electronics may employ it for storing calibration data or event logs. Industrial automation systems can benefit from its use in storing configuration parameters or sensor data.

Detailed and Complete Alternative Models

  1. AT25F512B-SSHL-T: Similar to AT25F512N-10SI-2.7, but with a different package (8-pin SOIC) and operating temperature range (-40°C to +85°C). 2

기술 솔루션에 AT25F512N-10SI-2.7 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of AT25F512N-10SI-2.7 in technical solutions:

  1. Q: What is the AT25F512N-10SI-2.7? A: The AT25F512N-10SI-2.7 is a serial flash memory device with a capacity of 512 kilobits (64 kilobytes). It operates at a voltage of 2.7V and has a maximum clock frequency of 10 MHz.

  2. Q: What are some typical applications for the AT25F512N-10SI-2.7? A: The AT25F512N-10SI-2.7 is commonly used in various electronic devices such as consumer electronics, industrial equipment, automotive systems, and communication devices for storing firmware, configuration data, and other non-volatile information.

  3. Q: How does the AT25F512N-10SI-2.7 connect to a microcontroller or other host device? A: The AT25F512N-10SI-2.7 uses a standard SPI (Serial Peripheral Interface) protocol for communication. It requires four signal lines: Serial Clock (SCK), Chip Select (CS), Master Out Slave In (MOSI), and Master In Slave Out (MISO).

  4. Q: What is the operating voltage range of the AT25F512N-10SI-2.7? A: The AT25F512N-10SI-2.7 operates within a voltage range of 2.7V to 3.6V.

  5. Q: Can the AT25F512N-10SI-2.7 be operated at higher voltages? A: No, it is not recommended to operate the AT25F512N-10SI-2.7 above its maximum voltage rating of 3.6V to avoid damaging the device.

  6. Q: What is the typical power consumption of the AT25F512N-10SI-2.7? A: The AT25F512N-10SI-2.7 has low power consumption, typically drawing around 5 mA during active read or write operations and less than 1 µA in standby mode.

  7. Q: Can the AT25F512N-10SI-2.7 be reprogrammed multiple times? A: Yes, the AT25F512N-10SI-2.7 supports both programming and erasing operations, allowing it to be reprogrammed multiple times.

  8. Q: What is the endurance of the AT25F512N-10SI-2.7? A: The AT25F512N-10SI-2.7 has a minimum endurance of 100,000 program/erase cycles per sector.

  9. Q: Does the AT25F512N-10SI-2.7 have any built-in security features? A: Yes, the AT25F512N-10SI-2.7 provides hardware and software protection mechanisms such as write protection, lock bits, and password protection to prevent unauthorized access or modification of data.

  10. Q: Is the AT25F512N-10SI-2.7 RoHS compliant? A: Yes, the AT25F512N-10SI-2.7 is compliant with the Restriction of Hazardous Substances (RoHS) directive, ensuring it meets environmental standards.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.