Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
AT25HP256-10PI-2.7
자세히보기 데이터시트

AT25HP256-10PI-2.7

Product Overview

Category

The AT25HP256-10PI-2.7 belongs to the category of non-volatile memory integrated circuits.

Use

It is commonly used for data storage in various electronic devices such as microcontrollers, IoT devices, and consumer electronics.

Characteristics

  • Non-volatile memory
  • High performance
  • Low power consumption
  • Durable and reliable
  • Wide operating voltage range

Package

The AT25HP256-10PI-2.7 is available in a 8-pin PDIP (Plastic Dual-In-Line Package) package.

Essence

This product is essential for storing critical data in embedded systems and electronic devices.

Packaging/Quantity

It is typically packaged in tubes or trays and is available in varying quantities depending on the manufacturer's specifications.

Specifications

  • Memory Size: 256 Kbits
  • Organization: 32K x 8
  • Operating Voltage: 2.7V - 5.5V
  • Speed: 10 MHz
  • Interface: SPI (Serial Peripheral Interface)
  • Operating Temperature Range: -40°C to +85°C
  • Data Retention: 100 years
  • Endurance: 1,000,000 write cycles

Detailed Pin Configuration

The AT25HP256-10PI-2.7 has the following pin configuration: 1. Chip Select (/CS) 2. Serial Data Input/Output (SI/SO) 3. Serial Clock (SCK) 4. Write Protect (/WP) 5. Ground (GND) 6. No Connection (NC) 7. Power Supply (VCC) 8. Hold (/HOLD)

Functional Features

  • High-Speed Performance: Enables fast data transfer and access.
  • Low Power Consumption: Ideal for battery-powered devices.
  • Write Protection: Ensures data integrity by preventing accidental writes.
  • Wide Operating Voltage Range: Allows compatibility with various systems.

Advantages and Disadvantages

Advantages

  • Reliable data storage
  • Low power consumption
  • High-speed performance
  • Wide operating voltage range

Disadvantages

  • Limited storage capacity compared to other memory options
  • Higher cost per bit compared to larger memory chips

Working Principles

The AT25HP256-10PI-2.7 utilizes the SPI interface to communicate with the host system. It stores data in non-volatile memory cells, allowing it to retain information even when power is removed. The chip select, serial clock, and serial data input/output lines enable the transfer of data between the memory and the host device.

Detailed Application Field Plans

The AT25HP256-10PI-2.7 is widely used in the following applications: - Microcontroller-based systems - Industrial automation - Automotive electronics - IoT devices - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the AT25HP256-10PI-2.7 include: - AT25HP512-10PU-2.7 - AT25HP1024-10PU-2.7 - W25Q256JVSIQ - MX25L25635F

In conclusion, the AT25HP256-10PI-2.7 is a versatile non-volatile memory IC that offers high-speed performance, low power consumption, and reliable data storage. Its wide operating voltage range and durability make it suitable for a variety of electronic applications.

[Word count: 514]

기술 솔루션에 AT25HP256-10PI-2.7 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the AT25HP256-10PI-2.7?

    • The AT25HP256-10PI-2.7 is a 256K bit serial EEPROM with SPI interface, designed for use in various technical solutions.

  2. What are the key features of the AT25HP256-10PI-2.7?

    • The key features include a high-speed SPI interface, low power consumption, and a wide operating voltage range.

  3. How can the AT25HP256-10PI-2.7 be used in technical solutions?

    • It can be used for storing configuration data, program code, and other critical information in embedded systems, industrial equipment, and consumer electronics.

  4. What is the operating voltage range of the AT25HP256-10PI-2.7?

    • The operating voltage range is typically from 2.7V to 5.5V, making it suitable for a wide range of applications.

  5. What is the maximum clock frequency supported by the AT25HP256-10PI-2.7?

    • The device supports clock frequencies up to 20MHz, enabling high-speed data transfer.

  6. Can the AT25HP256-10PI-2.7 withstand harsh environmental conditions?

    • Yes, it is designed to operate reliably in industrial environments and can withstand extended temperature ranges.

  7. What are the typical applications of the AT25HP256-10PI-2.7 in technical solutions?

    • Typical applications include data logging, firmware storage, parameter storage, and system configuration in various electronic devices.

  8. Does the AT25HP256-10PI-2.7 support hardware write protection?

    • Yes, it provides hardware write protection to prevent accidental or unauthorized writes to the memory.

  9. Is the AT25HP256-10PI-2.7 compatible with standard SPI interfaces?

    • Yes, it is fully compatible with standard SPI interfaces, making it easy to integrate into existing designs.

  10. What are the recommended storage and operating conditions for the AT25HP256-10PI-2.7?

    • The recommended storage and operating conditions include temperature ranges, humidity levels, and ESD precautions to ensure proper functionality and longevity of the device.