AT27BV010-15VC

Product Overview

Category

AT27BV010-15VC belongs to the category of non-volatile memory devices.

Use

This product is primarily used for storing and retrieving digital data in electronic systems.

Characteristics

• Non-volatile: The stored data is retained even when power is removed.
• High capacity: The AT27BV010-15VC has a storage capacity of 1 megabit (128 kilobytes).
• Low power consumption: It operates at low power levels, making it suitable for battery-powered devices.
• Fast access time: The device offers a fast access time of 150 nanoseconds.

Package

The AT27BV010-15VC comes in a standard plastic package, which provides protection and easy integration into electronic circuits.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile storage for digital data.

Packaging/Quantity

The AT27BV010-15VC is typically packaged in reels or tubes, with each containing a specific quantity of devices. The exact packaging and quantity may vary depending on the manufacturer's specifications.

Specifications

• Memory Type: Non-volatile
• Capacity: 1 Megabit (128 Kilobytes)
• Access Time: 150 Nanoseconds
• Supply Voltage: 2.7V - 3.6V
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The AT27BV010-15VC has a total of 32 pins, each serving a specific function. The pin configuration is as follows:

1. A0 - Address Input
2. A1 - Address Input
3. A2 - Address Input
4. A3 - Address Input
5. A4 - Address Input
6. A5 - Address Input
7. A6 - Address Input
8. A7 - Address Input
9. A8 - Address Input
10. A9 - Address Input
11. A10 - Address Input
12. A11 - Address Input
13. CE - Chip Enable Input
14. OE - Output Enable Input
15. WE - Write Enable Input
16. VCC - Power Supply
17. DQ0 - Data Input/Output
18. DQ1 - Data Input/Output
19. DQ2 - Data Input/Output
20. DQ3 - Data Input/Output
21. DQ4 - Data Input/Output
22. DQ5 - Data Input/Output
23. DQ6 - Data Input/Output
24. DQ7 - Data Input/Output
25. NC - No Connection
26. GND - Ground
27. RP - Ready/Busy Output
28. BYTE - Byte/Word Organization Input
29. RESET - Reset Input
30. WP - Write Protect Input
31. VPP - Program/Erase Voltage
32. NC - No Connection

Functional Features

The AT27BV010-15VC offers the following functional features:

• Random access: The memory can be accessed randomly, allowing for efficient data retrieval.
• High reliability: The non-volatile nature of the memory ensures that data is retained even in the event of power loss or system failure.
• Low power consumption: The device operates at low power levels, making it suitable for battery-powered applications.
• Easy integration: The standard pin configuration and package make it easy to integrate into electronic circuits.

Advantages and Disadvantages

Advantages

• Non-volatile storage ensures data retention.
• High capacity allows for storing a large amount of digital data.
• Fast access time enables quick retrieval of stored information.
• Low power consumption prolongs battery life in portable devices.

Disadvantages

• Limited storage capacity compared to other memory devices.
• Relatively slower access time compared to some modern memory technologies.

Working Principles

The AT27BV010-15VC utilizes a combination of electronic circuits and non-volatile memory cells to store and retrieve digital data. When data is written, the appropriate address is provided along with the data input, and the device stores the information in the corresponding memory cell. During read operations, the desired address is provided, and the stored data is retrieved from the memory cell and made available for output.

Detailed Application Field Plans

The AT27BV010-15VC finds applications in various electronic systems, including but not limited to:

1. Embedded systems: The non-volatile nature of the memory makes it suitable for storing critical system parameters and firmware in embedded systems.
2. Consumer electronics: It can be used in devices such as set-top boxes, televisions, and audio players to store configuration settings and user data.
3. Industrial automation: The memory can be employed in industrial control systems to store program code and data.
4. Automotive electronics: It can be utilized in automotive applications