AT27C256R-15JC belongs to the category of programmable read-only memory (PROM) chips.
This chip is primarily used for storing data that needs to be permanently stored and cannot be modified or erased. It finds applications in various electronic devices where non-volatile memory is required.
The AT27C256R-15JC comes in a 32-pin plastic J-lead chip carrier (PLCC) package.
The essence of this PROM chip lies in its ability to store data permanently, providing reliable and secure storage solutions for electronic devices.
The AT27C256R-15JC is typically packaged in reels containing a quantity of 250 units.
The AT27C256R-15JC has a total of 32 pins, each serving a specific function. The pin configuration is as follows:
The AT27C256R-15JC operates based on the principle of electrical programming. The data is programmed into the chip during the manufacturing process using specialized equipment. Once programmed, the data remains stored in the chip indefinitely and can be accessed whenever required.
The AT27C256R-15JC finds applications in various electronic devices that require non-volatile memory. Some common application fields include:
Sure! Here are 10 common questions and answers related to the application of AT27C256R-15JC in technical solutions:
Q: What is the AT27C256R-15JC? A: The AT27C256R-15JC is a 256-kilobit (32K x 8) CMOS EPROM (Electrically Programmable Read-Only Memory) integrated circuit.
Q: What are the key features of the AT27C256R-15JC? A: Some key features include a fast access time of 150 ns, low power consumption, and a wide operating voltage range of 4.5V to 5.5V.
Q: How can I program the AT27C256R-15JC? A: The AT27C256R-15JC is programmed using a conventional EPROM programmer that supplies the necessary programming voltage and signals.
Q: Can the AT27C256R-15JC be reprogrammed? A: No, the AT27C256R-15JC is a one-time programmable memory device and cannot be electrically erased or reprogrammed.
Q: What is the maximum data retention period for the AT27C256R-15JC? A: The AT27C256R-15JC has a minimum data retention period of 10 years.
Q: What is the operating temperature range for the AT27C256R-15JC? A: The AT27C256R-15JC can operate within a temperature range of -40°C to +85°C.
Q: Can the AT27C256R-15JC be used in battery-powered applications? A: Yes, the AT27C256R-15JC has low power consumption, making it suitable for battery-powered applications.
Q: What is the pin configuration of the AT27C256R-15JC? A: The AT27C256R-15JC has a 28-pin JEDEC-standard package with specific pins for address inputs, data inputs/outputs, control signals, and power supply.
Q: Can the AT27C256R-15JC be used in industrial applications? A: Yes, the AT27C256R-15JC is designed to meet industrial operating conditions and can be used in various industrial applications.
Q: Are there any recommended precautions while handling the AT27C256R-15JC? A: It is recommended to follow standard ESD (Electrostatic Discharge) precautions while handling the AT27C256R-15JC to prevent damage to the device.
Please note that these answers are general and may vary depending on the specific requirements and use cases.