이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
AT28BV64-20SC

AT28BV64-20SC

Product Overview

Category

AT28BV64-20SC belongs to the category of non-volatile memory devices.

Use

It is primarily used for storing and retrieving digital information in electronic systems.

Characteristics

  • Non-volatile: The stored data remains intact even when power is removed.
  • High capacity: The AT28BV64-20SC has a storage capacity of 64 kilobits.
  • Low power consumption: It operates on low power, making it suitable for battery-powered devices.
  • Fast access time: The device offers quick access to stored data.

Package

The AT28BV64-20SC comes in a small outline integrated circuit (SOIC) package.

Essence

The essence of AT28BV64-20SC lies in its ability to provide reliable and non-volatile memory storage for electronic systems.

Packaging/Quantity

The device is typically packaged in reels or tubes, with each containing a specific quantity of AT28BV64-20SC chips.

Specifications

  • Storage Capacity: 64 kilobits
  • Operating Voltage: 2.7V - 5.5V
  • Access Time: 200 nanoseconds
  • Operating Temperature Range: -40°C to +85°C
  • Interface: Parallel

Detailed Pin Configuration

The AT28BV64-20SC has a total of 28 pins, which are assigned specific functions. The pin configuration is as follows:

  1. A0 - Address Input
  2. A1 - Address Input
  3. A2 - Address Input
  4. A3 - Address Input
  5. A4 - Address Input
  6. A5 - Address Input
  7. A6 - Address Input
  8. A7 - Address Input
  9. CE - Chip Enable Input
  10. OE - Output Enable Input
  11. WE - Write Enable Input
  12. NC - No Connection
  13. VCC - Power Supply
  14. DQ0 - Data Input/Output
  15. DQ1 - Data Input/Output
  16. DQ2 - Data Input/Output
  17. DQ3 - Data Input/Output
  18. DQ4 - Data Input/Output
  19. DQ5 - Data Input/Output
  20. DQ6 - Data Input/Output
  21. DQ7 - Data Input/Output
  22. NC - No Connection
  23. GND - Ground
  24. NC - No Connection
  25. NC - No Connection
  26. NC - No Connection
  27. NC - No Connection
  28. NC - No Connection

Functional Features

  • Byte and Page Write: The AT28BV64-20SC supports both byte and page write operations, allowing for efficient data storage and retrieval.
  • Software and Hardware Data Protection: It provides mechanisms to protect stored data from accidental modification or erasure.
  • High-Speed Read: The device offers fast read access, enabling quick retrieval of stored information.
  • Low Power Consumption: The AT28BV64-20SC operates on low power, making it suitable for battery-powered devices.

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures data retention even during power loss.
  • High storage capacity for a wide range of applications.
  • Fast access time allows for quick data retrieval.
  • Low power consumption prolongs battery life in portable devices.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Relatively slower write speed compared to volatile memory devices.

Working Principles

The AT28BV64-20SC utilizes electrically erasable programmable read-only memory (EEPROM) technology. It stores data by trapping electrical charges within floating gate transistors. These charges can be selectively removed or added using electrical signals, allowing for data modification.

Detailed Application Field Plans

The AT28BV64-20SC finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Medical devices

Detailed and Complete Alternative Models

  1. AT28C64B-15PU: Similar to AT28BV64-20SC, this model offers a storage capacity of 64 kilobits with a faster access time of 150 nanoseconds.
  2. AT28HC64B-12PC: This alternative model provides the same storage capacity as AT28BV64-20SC but operates at a lower voltage range of 2.7V - 3.6V.

These alternative models offer similar functionality and can be considered as replacements for the AT28BV64-20SC depending on specific requirements.

In conclusion, the AT28BV64-20SC is a non-volatile memory device that provides reliable and high-capacity storage for electronic systems. Its fast access time, low power consumption, and functional features

기술 솔루션에 AT28BV64-20SC 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of AT28BV64-20SC in technical solutions:

  1. Q: What is AT28BV64-20SC? A: AT28BV64-20SC is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) integrated circuit.

  2. Q: What is the capacity of AT28BV64-20SC? A: The AT28BV64-20SC has a capacity of 64 kilobits, which is equivalent to 8 kilobytes.

  3. Q: What does the "20SC" in AT28BV64-20SC signify? A: The "20SC" indicates the operating speed of the EEPROM, which is 200 nanoseconds.

  4. Q: What are some common applications of AT28BV64-20SC? A: AT28BV64-20SC is commonly used in various electronic devices such as microcontrollers, embedded systems, automotive electronics, and industrial control systems.

  5. Q: Can AT28BV64-20SC be used for data storage in consumer electronics? A: Yes, AT28BV64-20SC can be used for data storage in consumer electronics like digital cameras, MP3 players, and gaming consoles.

  6. Q: Is AT28BV64-20SC compatible with both 3.3V and 5V systems? A: Yes, AT28BV64-20SC is designed to be compatible with both 3.3V and 5V systems, making it versatile for different applications.

  7. Q: How many write cycles can AT28BV64-20SC endure? A: AT28BV64-20SC can endure a minimum of 10,000 write cycles, ensuring reliable and long-lasting data storage.

  8. Q: Can AT28BV64-20SC retain data without power? A: Yes, AT28BV64-20SC is non-volatile memory, meaning it can retain data even when power is removed.

  9. Q: Does AT28BV64-20SC support in-system programming (ISP)? A: Yes, AT28BV64-20SC supports in-system programming, allowing for convenient updates or modifications to the stored data.

  10. Q: Are there any specific precautions to consider when using AT28BV64-20SC? A: It is important to handle AT28BV64-20SC with proper electrostatic discharge (ESD) precautions to prevent damage. Additionally, following the manufacturer's datasheet guidelines for voltage levels and timing is crucial for correct operation.

Please note that these answers are general and may vary depending on the specific requirements and implementation of the technical solution.