이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
AT28BV64B-20SI

AT28BV64B-20SI

Product Overview

Category

AT28BV64B-20SI belongs to the category of non-volatile memory devices.

Use

This product is primarily used for data storage in various electronic devices such as microcontrollers, embedded systems, and consumer electronics.

Characteristics

  • Non-volatile: The AT28BV64B-20SI retains stored data even when power is removed.
  • High capacity: It offers a storage capacity of 64 kilobits (8 kilobytes).
  • Low power consumption: The device operates on low power, making it suitable for battery-powered applications.
  • Fast access time: With a maximum access time of 200 nanoseconds, it provides quick data retrieval.

Package

The AT28BV64B-20SI is available in a small outline integrated circuit (SOIC) package. This package type ensures easy integration into various electronic systems.

Essence

The essence of AT28BV64B-20SI lies in its ability to provide reliable and non-volatile data storage in a compact form factor.

Packaging/Quantity

This product is typically packaged in reels or tubes, with each containing a specific quantity of AT28BV64B-20SI devices. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Supply voltage: 2.7V - 3.6V
  • Operating temperature range: -40°C to +85°C
  • Maximum access time: 200 ns
  • Organization: 8K x 8 bits
  • Erase/write cycles: 10,000 minimum

Detailed Pin Configuration

The AT28BV64B-20SI has a total of 28 pins, which are assigned specific functions. The pin configuration is as follows:

  1. A0 - Address Input
  2. A1 - Address Input
  3. A2 - Address Input
  4. A3 - Address Input
  5. A4 - Address Input
  6. A5 - Address Input
  7. A6 - Address Input
  8. A7 - Address Input
  9. VCC - Power Supply
  10. CE - Chip Enable
  11. OE - Output Enable
  12. WE - Write Enable
  13. I/O0 - Data Input/Output
  14. I/O1 - Data Input/Output
  15. I/O2 - Data Input/Output
  16. I/O3 - Data Input/Output
  17. I/O4 - Data Input/Output
  18. I/O5 - Data Input/Output
  19. I/O6 - Data Input/Output
  20. I/O7 - Data Input/Output
  21. NC - No Connection
  22. GND - Ground
  23. NC - No Connection
  24. NC - No Connection
  25. NC - No Connection
  26. NC - No Connection
  27. NC - No Connection
  28. NC - No Connection

Functional Features

  • Byte-wide operations: The AT28BV64B-20SI allows individual byte-level read and write operations, providing flexibility in data manipulation.
  • Hardware and software protection: This device offers various protection mechanisms to prevent unauthorized access or accidental modification of stored data.
  • Fast page write: It supports fast programming of up to 64 bytes in a single write operation, enhancing overall data transfer efficiency.

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures data retention even during power loss.
  • High storage capacity for a wide range of applications.
  • Low power consumption extends battery life in portable devices.
  • Fast access time enables quick data retrieval.

Disadvantages

  • Limited erase/write cycles may restrict the lifespan of the device.
  • Relatively higher cost compared to other types of memory.

Working Principles

The AT28BV64B-20SI utilizes electrically erasable programmable read-only memory (EEPROM) technology. It stores data by trapping electrical charges in floating gate transistors, which can be erased and reprogrammed using specific voltage levels. The device operates based on address inputs, control signals, and data lines to perform read and write operations.

Detailed Application Field Plans

The AT28BV64B-20SI finds applications in various fields, including: 1. Microcontrollers: Used for program storage and data retention in microcontroller-based systems. 2. Embedded Systems: Provides non-volatile memory for storing critical system parameters and firmware. 3. Consumer Electronics: Enables data storage in devices such as smartwatches, digital cameras, and portable media players.

Detailed and Complete Alternative Models

  1. AT28C64B-15PU: Similar to AT28BV64B-20SI but operates at a lower voltage range.
  2. AT28HC64B-12PC: Offers higher endurance with increased erase/write cycles.
  3. AT28LV64B-15JI: Low

기술 솔루션에 AT28BV64B-20SI 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of AT28BV64B-20SI in technical solutions:

  1. Q: What is the AT28BV64B-20SI? A: The AT28BV64B-20SI is a 64K (8K x 8) EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by Microchip Technology.

  2. Q: What is the operating voltage range for the AT28BV64B-20SI? A: The AT28BV64B-20SI operates within a voltage range of 2.7V to 5.5V.

  3. Q: What is the maximum clock frequency supported by the AT28BV64B-20SI? A: The AT28BV64B-20SI supports a maximum clock frequency of 20 MHz.

  4. Q: Can the AT28BV64B-20SI be used for code storage in microcontroller-based systems? A: Yes, the AT28BV64B-20SI can be used for code storage in microcontroller-based systems as it provides non-volatile memory storage.

  5. Q: How many write cycles can the AT28BV64B-20SI endure? A: The AT28BV64B-20SI can endure a minimum of 10,000 write cycles.

  6. Q: Does the AT28BV64B-20SI support byte-level read and write operations? A: Yes, the AT28BV64B-20SI supports byte-level read and write operations, allowing for efficient data manipulation.

  7. Q: Is the AT28BV64B-20SI compatible with standard EEPROM programming interfaces? A: Yes, the AT28BV64B-20SI is compatible with standard EEPROM programming interfaces, making it easy to integrate into existing systems.

  8. Q: Can the AT28BV64B-20SI be used in automotive applications? A: Yes, the AT28BV64B-20SI is designed to meet automotive industry requirements and can be used in automotive applications.

  9. Q: Does the AT28BV64B-20SI have any security features? A: No, the AT28BV64B-20SI does not have built-in security features such as write protection or encryption.

  10. Q: What is the temperature range within which the AT28BV64B-20SI can operate reliably? A: The AT28BV64B-20SI can operate reliably within a temperature range of -40°C to +85°C.

Please note that these answers are based on general information about the AT28BV64B-20SI and may vary depending on specific application requirements.