이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
AT49BV163AT-55CU

AT49BV163AT-55CU

Product Overview

Category

The AT49BV163AT-55CU belongs to the category of non-volatile memory devices.

Use

It is primarily used for data storage and retrieval in electronic systems.

Characteristics

  • Non-volatile: Retains data even when power is turned off.
  • High capacity: Offers a storage capacity of 16 megabits (2 megabytes).
  • Fast access time: Provides quick data retrieval with a maximum access time of 55 nanoseconds.
  • Low power consumption: Operates at low power levels, making it suitable for battery-powered devices.

Package

The AT49BV163AT-55CU is available in a standard 48-pin TSOP (Thin Small Outline Package) form factor.

Essence

The essence of this product lies in its ability to store and retrieve digital information reliably and efficiently.

Packaging/Quantity

The AT49BV163AT-55CU is typically packaged in reels or tubes, with each package containing a specific quantity of devices. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

  • Storage Capacity: 16 Megabits (2 Megabytes)
  • Access Time: 55 Nanoseconds (Max)
  • Supply Voltage: 2.7V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Interface: Parallel
  • Organization: 2M x 8
  • Erase/Program Cycles: 10,000 minimum

Detailed Pin Configuration

The AT49BV163AT-55CU has a total of 48 pins, which are assigned specific functions. The pin configuration is as follows:

  1. A0-A19: Address Inputs
  2. DQ0-DQ7: Data Input/Output
  3. CE: Chip Enable
  4. OE: Output Enable
  5. WE: Write Enable
  6. RP: Ready/Busy Output
  7. VCC: Power Supply
  8. GND: Ground

(Note: The pin configuration may vary depending on the manufacturer's specifications.)

Functional Features

  • Random Access: Allows for direct access to any memory location.
  • Byte-Wide Operation: Supports both byte and word operations.
  • Erase and Program Operations: Enables data modification through erase and program cycles.
  • Hardware Data Protection: Provides protection against accidental write or erase operations.
  • Low Power Consumption: Operates at low power levels, extending battery life in portable devices.

Advantages and Disadvantages

Advantages

  • Non-volatile nature ensures data retention even during power loss.
  • High storage capacity suitable for various applications.
  • Fast access time allows for quick data retrieval.
  • Low power consumption extends battery life.
  • Hardware data protection prevents accidental data loss.

Disadvantages

  • Limited erase and program cycles may affect long-term durability.
  • Parallel interface may limit compatibility with certain systems.
  • Relatively larger form factor compared to newer memory technologies.

Working Principles

The AT49BV163AT-55CU utilizes flash memory technology to store and retrieve digital information. It employs a combination of floating-gate transistors and charge storage elements to represent binary data. The memory cells are organized into an array, and data is accessed by specifying the desired memory address. The device supports both read and write operations, allowing for data modification as needed.

Detailed Application Field Plans

The AT49BV163AT-55CU finds application in various electronic systems that require non-volatile storage capabilities. Some potential application fields include:

  1. Embedded Systems: Used for firmware storage in microcontrollers and other embedded devices.
  2. Consumer Electronics: Employed in devices such as digital cameras, set-top boxes, and gaming consoles for data storage.
  3. Automotive Electronics: Utilized in automotive systems for storing critical data, such as firmware updates and configuration settings.
  4. Industrial Control Systems: Integrated into industrial control systems to store program code and configuration data.

Detailed and Complete Alternative Models

  1. AT49BV1614T-70TU: Similar flash memory device with a higher storage capacity of 16 megabits (2 megabytes).
  2. AT45DB161E-SHN-T: Serial interface flash memory with a storage capacity of 16 megabits (2 megabytes).
  3. S25FL116K0XMFI011: SPI interface flash memory with a storage capacity of 16 megabits (2 megabytes).

(Note: The alternative models listed above are provided for reference purposes and may have different specifications and pin configurations.)


Word count: 570 words

기술 솔루션에 AT49BV163AT-55CU 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. Question: What is the operating voltage range of AT49BV163AT-55CU?
    Answer: The operating voltage range of AT49BV163AT-55CU is 2.7V to 3.6V.

  2. Question: What is the maximum clock frequency supported by AT49BV163AT-55CU?
    Answer: AT49BV163AT-55CU supports a maximum clock frequency of 55 MHz.

  3. Question: What is the capacity of AT49BV163AT-55CU?
    Answer: AT49BV163AT-55CU has a capacity of 16 megabits (2 megabytes).

  4. Question: Can AT49BV163AT-55CU be used for code storage in microcontroller-based systems?
    Answer: Yes, AT49BV163AT-55CU can be used for code storage in microcontroller-based systems.

  5. Question: Does AT49BV163AT-55CU support byte-level or word-level programming?
    Answer: AT49BV163AT-55CU supports both byte-level and word-level programming.

  6. Question: What is the access time of AT49BV163AT-55CU?
    Answer: The access time of AT49BV163AT-55CU is 55 ns.

  7. Question: Is AT49BV163AT-55CU compatible with standard TTL input/output levels?
    Answer: Yes, AT49BV163AT-55CU is compatible with standard TTL input/output levels.

  8. Question: Can AT49BV163AT-55CU operate in industrial temperature ranges?
    Answer: Yes, AT49BV163AT-55CU can operate in industrial temperature ranges (-40°C to +85°C).

  9. Question: Does AT49BV163AT-55CU support hardware data protection features?
    Answer: Yes, AT49BV163AT-55CU supports hardware data protection features like block lock and password protection.

  10. Question: Can AT49BV163AT-55CU be used in battery-powered devices?
    Answer: Yes, AT49BV163AT-55CU can be used in battery-powered devices as it operates at low voltage and has low power consumption.