AT49F002ANT-55TU belongs to the category of non-volatile memory devices.
This product is primarily used for storing and retrieving data in electronic systems.
The AT49F002ANT-55TU is available in a surface-mount TSOP package.
The essence of this product lies in its ability to provide reliable and high-capacity non-volatile memory storage for various electronic systems.
The AT49F002ANT-55TU is typically packaged in reels, with each reel containing a specific quantity of devices. The exact quantity may vary depending on the manufacturer's specifications.
The AT49F002ANT-55TU features a parallel interface with the following pin configuration:
The AT49F002ANT-55TU utilizes flash memory technology, which is based on the principle of trapping electrical charges in a floating gate. These trapped charges represent binary data (0 or 1). The device uses a combination of transistors and capacitors to store and retrieve data.
During write operations, an electric charge is applied to the control gate, allowing electrons to tunnel through the insulating layer and become trapped in the floating gate. This process alters the threshold voltage of the memory cell, representing the desired data value.
During read operations, the stored charge is measured by applying a voltage to the control gate and sensing the resulting current flow. The magnitude of the current determines the stored data value.
The AT49F002ANT-55TU can be used in various applications, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices
Some alternative models that offer similar functionality to the AT49F002ANT-55TU
Sure! Here are 10 common questions and answers related to the application of AT49F002ANT-55TU in technical solutions:
Q: What is the AT49F002ANT-55TU? A: The AT49F002ANT-55TU is a 2-megabit (256K x 8) flash memory device manufactured by Atmel.
Q: What are the main features of the AT49F002ANT-55TU? A: The main features include a 5-volt power supply, fast read and write operations, low power consumption, and compatibility with various microcontrollers.
Q: How can I interface the AT49F002ANT-55TU with a microcontroller? A: The AT49F002ANT-55TU uses a standard parallel interface, making it compatible with most microcontrollers. You can connect it using address, data, and control lines.
Q: What is the maximum operating frequency of the AT49F002ANT-55TU? A: The AT49F002ANT-55TU supports a maximum operating frequency of 55 MHz.
Q: Can I use the AT49F002ANT-55TU for code storage in my embedded system? A: Yes, the AT49F002ANT-55TU is commonly used for code storage in various embedded systems due to its high capacity and fast access times.
Q: Does the AT49F002ANT-55TU support in-system programming (ISP)? A: No, the AT49F002ANT-55TU does not support in-system programming. It requires a separate programmer device for programming.
Q: What is the typical endurance of the AT49F002ANT-55TU? A: The AT49F002ANT-55TU has a typical endurance of 10,000 erase/write cycles per sector.
Q: Can I use the AT49F002ANT-55TU in automotive applications? A: Yes, the AT49F002ANT-55TU is suitable for automotive applications as it meets the necessary temperature and reliability requirements.
Q: What is the operating temperature range of the AT49F002ANT-55TU? A: The AT49F002ANT-55TU can operate within a temperature range of -40°C to +85°C.
Q: Are there any specific precautions I need to take while handling the AT49F002ANT-55TU? A: It is recommended to follow standard ESD (Electrostatic Discharge) precautions while handling the AT49F002ANT-55TU to prevent any damage to the device.
Please note that these answers are general and may vary depending on the specific application and requirements.