Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
AT87C58X2-SLSUL
자세히보기 데이터시트

AT87C58X2-SLSUL

Product Overview

Category

The AT87C58X2-SLSUL belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and systems for controlling and processing data.

Characteristics

  • High-performance 8-bit microcontroller
  • Low-power consumption
  • Wide operating voltage range
  • Integrated peripherals for enhanced functionality
  • Robust design for reliable operation

Package

The AT87C58X2-SLSUL is available in a small outline package (SOP) format, which allows for easy integration into circuit boards.

Essence

The essence of this microcontroller lies in its ability to execute complex instructions and perform calculations efficiently, making it suitable for a wide range of applications.

Packaging/Quantity

The AT87C58X2-SLSUL is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 20 MHz
  • Program Memory Size: 8 KB
  • RAM Size: 256 bytes
  • Number of I/O Pins: 32
  • Operating Voltage Range: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Communication Interfaces: UART, SPI, I2C
  • Timer/Counter Units: 3
  • Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution

Detailed Pin Configuration

The AT87C58X2-SLSUL has a total of 40 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VCC - Power supply voltage
  2. GND - Ground
  3. P0.0 - General-purpose I/O pin
  4. P0.1 - General-purpose I/O pin
  5. P0.2 - General-purpose I/O pin
  6. P0.3 - General-purpose I/O pin
  7. P0.4 - General-purpose I/O pin
  8. P0.5 - General-purpose I/O pin
  9. P0.6 - General-purpose I/O pin
  10. P0.7 - General-purpose I/O pin
  11. RST - Reset pin
  12. XTAL1 - Crystal oscillator input
  13. XTAL2 - Crystal oscillator output
  14. P1.0 - General-purpose I/O pin
  15. P1.1 - General-purpose I/O pin
  16. P1.2 - General-purpose I/O pin
  17. P1.3 - General-purpose I/O pin
  18. P1.4 - General-purpose I/O pin
  19. P1.5 - General-purpose I/O pin
  20. P1.6 - General-purpose I/O pin
  21. P1.7 - General-purpose I/O pin
  22. EA/VPP - External Access/Programming Enable
  23. ALE/PROG - Address Latch Enable/Program pulse
  24. PSEN - Program Store Enable
  25. P2.0 - General-purpose I/O pin
  26. P2.1 - General-purpose I/O pin
  27. P2.2 - General-purpose I/O pin
  28. P2.3 - General-purpose I/O pin
  29. P2.4 - General-purpose I/O pin
  30. P2.5 - General-purpose I/O pin
  31. P2.6 - General-purpose I/O pin
  32. P2.7 - General-purpose I/O pin
  33. RXD - UART Receive Data
  34. TXD - UART Transmit Data
  35. INT0 - External Interrupt 0
  36. INT1 - External Interrupt 1
  37. T0 - Timer/Counter 0 input
  38. T1 - Timer/Counter 1 input
  39. WR - Write control for external memory
  40. RD - Read control for external memory

Functional Features

The AT87C58X2-SLSUL offers several functional features that enhance its usability and performance:

  • High-speed processing capabilities
  • Multiple communication interfaces for data exchange
  • Integrated timers/counters for precise timing operations
  • Analog-to-Digital Converter (ADC) for analog signal processing
  • Flexible I/O pins for interfacing with external devices
  • Low-power consumption modes for energy efficiency
  • Robust protection mechanisms against electrical faults

Advantages and Disadvantages

Advantages

  • High-performance microcontroller suitable for demanding applications
  • Wide operating voltage range allows for compatibility with various power sources
  • Integrated peripherals reduce the need for additional components
  • Small package size enables compact designs
  • Low-power consumption extends battery life in portable devices

Disadvantages

  • Limited program memory size may restrict the complexity of applications
  • Limited

기술 솔루션에 AT87C58X2-SLSUL 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of AT87C58X2-SLSUL in technical solutions:

  1. Q: What is the AT87C58X2-SLSUL microcontroller used for? A: The AT87C58X2-SLSUL is a microcontroller primarily used for embedded systems and control applications.

  2. Q: What is the operating voltage range of the AT87C58X2-SLSUL? A: The AT87C58X2-SLSUL operates within a voltage range of 2.7V to 5.5V.

  3. Q: How much flash memory does the AT87C58X2-SLSUL have? A: The AT87C58X2-SLSUL has 8KB of on-chip flash memory.

  4. Q: Can I use the AT87C58X2-SLSUL for real-time applications? A: Yes, the AT87C58X2-SLSUL is suitable for real-time applications due to its high-performance architecture.

  5. Q: Does the AT87C58X2-SLSUL support analog-to-digital conversion? A: No, the AT87C58X2-SLSUL does not have an integrated ADC. You would need an external ADC if analog-to-digital conversion is required.

  6. Q: What communication interfaces are supported by the AT87C58X2-SLSUL? A: The AT87C58X2-SLSUL supports UART (Universal Asynchronous Receiver-Transmitter) and SPI (Serial Peripheral Interface) communication interfaces.

  7. Q: Can I program the AT87C58X2-SLSUL using C language? A: Yes, you can program the AT87C58X2-SLSUL using C language. It is commonly used with the Keil C51 compiler.

  8. Q: What is the maximum clock frequency of the AT87C58X2-SLSUL? A: The AT87C58X2-SLSUL can operate at a maximum clock frequency of 33 MHz.

  9. Q: Does the AT87C58X2-SLSUL have any on-chip timers/counters? A: Yes, the AT87C58X2-SLSUL has two 16-bit timer/counters that can be used for various timing and counting applications.

  10. Q: Can I use the AT87C58X2-SLSUL in battery-powered applications? A: Yes, the low operating voltage range and power-saving features make the AT87C58X2-SLSUL suitable for battery-powered applications.

Please note that these answers are based on general information about the AT87C58X2-SLSUL microcontroller. For specific technical details, it is recommended to refer to the datasheet or consult the manufacturer's documentation.