Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
AT91SAM7X256B-AU-999
자세히보기 데이터시트

AT91SAM7X256B-AU-999

Introduction

The AT91SAM7X256B-AU-999 is a microcontroller belonging to the AT91SAM7X series, which is designed and manufactured by Microchip Technology. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and detailed and complete alternative models.

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded systems, industrial control, automation, and IoT applications
  • Characteristics: High-performance ARM-based microcontroller, low power consumption, extensive peripheral set
  • Package: TQFP (Thin Quad Flat Package)
  • Essence: Advanced microcontroller unit for demanding embedded applications
  • Packaging/Quantity: Tape & Reel, 250 units per reel

Specifications

  • CPU: ARM7TDMI-S core running at up to 55 MHz
  • Memory: 256 KB of embedded flash, 64 KB of SRAM
  • I/O: Extensive I/O capabilities including UART, SPI, I2C, USB, and Ethernet
  • Operating Voltage: 3.0V to 3.6V
  • Temperature Range: -40°C to +85°C
  • Peripherals: ADC, PWM, timers, watchdog timer, real-time clock

Detailed Pin Configuration

The AT91SAM7X256B-AU-999 features a total of 100 pins, including GPIO, power supply, ground, and various peripheral pins. A detailed pinout diagram is available in the product datasheet.

Functional Features

  • High Performance: The ARM7TDMI-S core provides high processing power for demanding applications.
  • Low Power Consumption: Optimized power management features enable efficient operation in battery-powered devices.
  • Extensive Peripheral Set: The microcontroller offers a wide range of integrated peripherals for versatile connectivity and control.

Advantages and Disadvantages

Advantages

  • Powerful processing capabilities
  • Low power consumption
  • Rich set of integrated peripherals

Disadvantages

  • Limited on-chip memory compared to newer microcontrollers
  • Relatively higher cost compared to lower-end microcontrollers

Working Principles

The AT91SAM7X256B-AU-999 operates based on the ARM7TDMI-S core architecture, utilizing its advanced features to execute instructions, manage peripherals, and interact with external components. The microcontroller's firmware is typically developed using industry-standard development tools and programming languages.

Detailed Application Field Plans

The AT91SAM7X256B-AU-999 is well-suited for a wide range of applications, including: - Industrial automation - Motor control systems - Data acquisition and processing - Embedded networking devices - IoT edge devices

Detailed and Complete Alternative Models

  • AT91SAM7X128B-AU-999: Lower memory variant of the same microcontroller
  • AT91SAM7X512B-AU-999: Higher memory variant of the same microcontroller
  • Other microcontrollers from the AT91SAM7X series

In conclusion, the AT91SAM7X256B-AU-999 is a powerful and versatile microcontroller suitable for demanding embedded applications across various industries. Its combination of high performance, low power consumption, and extensive peripheral set makes it a compelling choice for developers seeking robust solutions for their projects.

[Word Count: 529]

기술 솔루션에 AT91SAM7X256B-AU-999 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the AT91SAM7X256B-AU-999 microcontroller used for?

    • The AT91SAM7X256B-AU-999 microcontroller is commonly used in embedded systems for various applications such as industrial automation, consumer electronics, and automotive control systems.

  2. What are the key features of the AT91SAM7X256B-AU-999?

    • The AT91SAM7X256B-AU-999 features a 32-bit ARM7TDMI® RISC processor core, 256KB of flash memory, 64KB of SRAM, multiple communication interfaces, and a wide range of peripherals suitable for diverse technical solutions.

  3. How can I program the AT91SAM7X256B-AU-999 microcontroller?

    • The microcontroller can be programmed using various development tools such as Atmel Studio, Keil µVision, or other compatible IDEs that support ARM architecture.

  4. What are the communication interfaces available on the AT91SAM7X256B-AU-999?

    • The microcontroller provides interfaces such as USART, SPI, TWI (I2C), and USB, enabling seamless connectivity with external devices and networks.

  5. Can the AT91SAM7X256B-AU-999 be used for real-time applications?

    • Yes, the microcontroller supports real-time applications through its timer/counters, interrupt controller, and fast I/O handling capabilities.

  6. Is the AT91SAM7X256B-AU-999 suitable for low-power applications?

    • Yes, the microcontroller offers low-power modes and features to optimize energy consumption, making it suitable for battery-powered and energy-efficient designs.

  7. What kind of development boards are available for prototyping with the AT91SAM7X256B-AU-999?

    • There are several development boards and evaluation kits specifically designed for the AT91SAM7X256B-AU-999, providing a convenient platform for prototyping and testing technical solutions.

  8. Does the AT91SAM7X256B-AU-999 support external memory expansion?

    • Yes, the microcontroller supports external memory interfaces, allowing for expanded storage and data processing capabilities.

  9. Are there any specific design considerations when using the AT91SAM7X256B-AU-999 in industrial applications?

    • When used in industrial applications, attention should be given to factors such as EMI/EMC compliance, temperature range requirements, and robustness against environmental conditions.

  10. What kind of operating system can be used with the AT91SAM7X256B-AU-999?

    • The microcontroller can run various operating systems, including real-time operating systems (RTOS) like FreeRTOS, as well as bare-metal firmware depending on the specific application requirements.