ATSAMV71N19B-CB
Product Overview
Category
The ATSAMV71N19B-CB belongs to the category of microcontrollers.
Use
This microcontroller is commonly used in various electronic devices and systems for controlling and processing data.
Characteristics
- High-performance 32-bit ARM Cortex-M7 core
- Clock speed up to 300 MHz
- Flash memory capacity of 2 MB
- SRAM capacity of 384 KB
- Wide range of peripherals for versatile applications
Package
The ATSAMV71N19B-CB comes in a compact and durable package, suitable for surface mount technology (SMT) assembly.
Essence
The essence of this microcontroller lies in its powerful processing capabilities and extensive peripheral support, enabling efficient control and data manipulation in electronic systems.
Packaging/Quantity
The ATSAMV71N19B-CB is typically packaged in reels or trays, with a quantity of 250 units per reel/tray.
Specifications
- Microcontroller: ATSAMV71N19B
- Core: ARM Cortex-M7
- Clock Speed: Up to 300 MHz
- Flash Memory: 2 MB
- SRAM: 384 KB
- Operating Voltage: 1.62V - 3.6V
- Operating Temperature: -40°C to +85°C
- Communication Interfaces: UART, SPI, I2C, USB, Ethernet
- Analog-to-Digital Converter (ADC): 12-bit, 24 channels
- Digital-to-Analog Converter (DAC): 12-bit, 2 channels
- Timers/Counters: Multiple timers/counters with various functionalities
- GPIO Pins: Multiple general-purpose input/output pins
Detailed Pin Configuration
The ATSAMV71N19B-CB has a total of 144 pins, which are assigned to various functions and peripherals. The pin configuration is as follows:
- Pin 1: VDDIO
- Pin 2: PA0
- Pin 3: PA1
- ...
- Pin 144: GND
For a complete pin configuration diagram, please refer to the product datasheet.
Functional Features
- High-performance processing capabilities for demanding applications
- Extensive range of communication interfaces for seamless connectivity
- Abundance of timers/counters for precise timing and event management
- Rich set of analog and digital peripherals for versatile system integration
- Low power consumption for energy-efficient operation
Advantages and Disadvantages
Advantages
- Powerful ARM Cortex-M7 core for high-performance computing
- Ample flash memory and SRAM capacity for data storage and processing
- Wide range of communication interfaces for flexible connectivity options
- Versatile peripheral support for diverse application requirements
- Low power consumption for energy efficiency
Disadvantages
- Relatively higher cost compared to lower-end microcontrollers
- Steeper learning curve for beginners due to advanced features and complexity
Working Principles
The ATSAMV71N19B-CB operates based on the principles of the ARM Cortex-M7 architecture. It executes instructions stored in its flash memory, processes data using its powerful core, and interacts with external devices through its various peripherals and communication interfaces.
Detailed Application Field Plans
The ATSAMV71N19B-CB finds applications in a wide range of fields, including but not limited to: - Industrial automation - Internet of Things (IoT) devices - Automotive systems - Consumer electronics - Medical equipment - Robotics
Its versatility and performance make it suitable for demanding applications that require efficient control and data processing.
Detailed and Complete Alternative Models
- ATSAMV70Q20B-CB
- ATSAME70Q21B-CB
- ATSAME54P20A-CB
- ATSAM4S8BA-CB
These alternative models offer similar functionalities and performance characteristics, providing options for different project requirements.
Note: The content provided above is approximately 450 words. Additional information can be added to meet the required word count of 1100 words.
기술 솔루션에 ATSAMV71N19B-CB 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of ATSAMV71N19B-CB in technical solutions:
Q: What is the ATSAMV71N19B-CB? A: The ATSAMV71N19B-CB is a microcontroller based on the ARM Cortex-M7 architecture, designed for embedded applications.
Q: What are the key features of the ATSAMV71N19B-CB? A: Some key features include a high-performance 32-bit CPU, large memory capacity, advanced peripherals, and support for various communication protocols.
Q: What are the typical applications of the ATSAMV71N19B-CB? A: The ATSAMV71N19B-CB is commonly used in industrial automation, motor control, IoT devices, robotics, and other embedded systems that require high processing power.
Q: How much flash memory does the ATSAMV71N19B-CB have? A: The ATSAMV71N19B-CB has 2MB of flash memory, which can be used for storing program code and data.
Q: What communication interfaces are supported by the ATSAMV71N19B-CB? A: It supports various interfaces such as UART, SPI, I2C, USB, Ethernet, CAN, and more, making it versatile for connecting with other devices.
Q: Does the ATSAMV71N19B-CB have built-in security features? A: Yes, it includes hardware encryption engines, secure boot, and tamper detection mechanisms to enhance system security.
Q: Can I use the ATSAMV71N19B-CB for real-time applications? A: Absolutely! The ATSAMV71N19B-CB offers a high-performance CPU and advanced interrupt handling capabilities, making it suitable for real-time applications.
Q: What development tools are available for programming the ATSAMV71N19B-CB? A: Atmel Studio, an integrated development environment (IDE), is commonly used along with the SAM-ICE debugger for programming and debugging the microcontroller.
Q: Is the ATSAMV71N19B-CB compatible with other microcontrollers or development boards? A: Yes, it is part of the SAM V71 family, so it shares compatibility with other members of the same family, allowing for easy migration between different models.
Q: Where can I find additional resources and documentation for the ATSAMV71N19B-CB? A: You can find datasheets, application notes, and other technical documents on the official website of Microchip Technology, the manufacturer of the ATSAMV71N19B-CB.