Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
ATTINY13V-10PQ

ATTINY13V-10PQ

Product Overview

Category

The ATTINY13V-10PQ belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and applications that require embedded control systems.

Characteristics

  • Low-power consumption
  • High-performance 8-bit AVR microcontroller
  • Compact size
  • Wide operating voltage range
  • Flash memory for program storage
  • EEPROM for data storage
  • In-system programmable
  • Multiple I/O pins for interfacing with external components

Package

The ATTINY13V-10PQ is available in a PQFN package, which stands for Plastic Quad Flat No-Lead. This package offers a compact form factor and allows for easy integration into small-sized electronic devices.

Essence

The essence of the ATTINY13V-10PQ lies in its ability to provide efficient and reliable control capabilities in a compact and low-power package.

Packaging/Quantity

The ATTINY13V-10PQ is typically sold in reels or tubes, containing a specific quantity of microcontrollers per package. The exact quantity may vary depending on the supplier and customer requirements.

Specifications

  • Microcontroller Architecture: AVR
  • CPU Speed: 10 MHz
  • Flash Memory: 1 KB
  • RAM: 64 Bytes
  • EEPROM: 64 Bytes
  • Operating Voltage Range: 1.8V - 5.5V
  • Digital I/O Pins: 6
  • Analog Input Pins: 4
  • PWM Channels: 2
  • Communication Interfaces: SPI, USART
  • Timers/Counters: 1 x 8-bit, 1 x 16-bit
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ATTINY13V-10PQ has a total of 20 pins, each serving a specific purpose. The pin configuration is as follows:

  1. PB5 (RESET)
  2. PB3 (XTAL1/CLKI)
  3. PB4 (XTAL2/CLKO)
  4. GND
  5. VCC
  6. PB0 (ADC0/PCINT0)
  7. PB1 (ADC1/PCINT1)
  8. PB2 (ADC2/PCINT2)
  9. PA7 (OC0A/PCINT7)
  10. PA6 (AIN0/OC0B/PCINT6)
  11. PA5 (AIN1/PCINT5)
  12. PA4 (ICP1/CLKI/PCINT4)
  13. PA3 (OC1B/PCINT3)
  14. PA2 (OC1A/PCINT2)
  15. PA1 (TXD/PCINT1)
  16. PA0 (RXD/PCINT0)
  17. AVCC
  18. AREF
  19. GND
  20. VCC

Functional Features

The ATTINY13V-10PQ offers several functional features that make it suitable for a wide range of applications:

  • Low-power consumption: The microcontroller is designed to operate efficiently with minimal power requirements, making it ideal for battery-powered devices.
  • In-system programmable: The flash memory can be easily programmed and updated without the need for external programming equipment.
  • Multiple I/O pins: The microcontroller provides a sufficient number of digital and analog I/O pins for interfacing with external components and sensors.
  • Communication interfaces: The SPI and USART interfaces enable seamless communication with other devices or systems.
  • Timers/Counters: The built-in timers/counters allow precise timing and event counting capabilities.

Advantages and Disadvantages

Advantages

  • Compact size enables integration into small-sized devices.
  • Low-power consumption extends battery life in portable applications.
  • In-system programmability simplifies firmware updates and debugging.
  • Wide operating voltage range allows for flexibility in power supply options.
  • Multiple I/O pins provide versatility in interfacing with external components.

Disadvantages

  • Limited flash memory and RAM may restrict the complexity of applications.
  • Limited number of I/O pins may limit the number of external components that can be connected simultaneously.

Working Principles

The ATTINY13V-10PQ operates based on the AVR microcontroller architecture. It executes instructions stored in its flash memory, which controls the behavior of the microcontroller. The input/output pins allow communication with external devices, while the timers/counters enable precise timing and event counting functionalities. The low-power design ensures efficient operation, making it suitable for various battery-powered applications.

Detailed Application Field Plans

The ATTINY13V-10PQ finds applications in a wide range of fields, including but not limited to:

  1. Home automation systems
  2. Internet of Things (IoT) devices
  3. Consumer electronics
  4. Industrial control systems
  5. Automotive electronics

기술 솔루션에 ATTINY13V-10PQ 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. Question: What is the ATTINY13V-10PQ?
    Answer: The ATTINY13V-10PQ is a microcontroller from Atmel, now owned by Microchip Technology. It is a low-power, high-performance 8-bit AVR microcontroller.

  2. Question: What are the key features of the ATTINY13V-10PQ?
    Answer: Some key features of the ATTINY13V-10PQ include 1KB Flash memory, 64B SRAM, 64B EEPROM, 6 general-purpose I/O pins, and a wide operating voltage range of 1.8V to 5.5V.

  3. Question: What are some typical applications of the ATTINY13V-10PQ?
    Answer: The ATTINY13V-10PQ is commonly used in various technical solutions such as battery-powered devices, sensor interfaces, LED lighting control, home automation, and small embedded systems.

  4. Question: How can I program the ATTINY13V-10PQ?
    Answer: The ATTINY13V-10PQ can be programmed using various programming tools such as Atmel Studio, Arduino IDE, or other compatible development environments. You will need an appropriate programmer or development board to connect to the microcontroller.

  5. Question: What programming language is used for programming the ATTINY13V-10PQ?
    Answer: The ATTINY13V-10PQ can be programmed using C/C++ language. However, it also supports assembly language programming if desired.

  6. Question: Can I use the ATTINY13V-10PQ with other microcontrollers or components?
    Answer: Yes, the ATTINY13V-10PQ can be easily integrated with other microcontrollers or components in a larger system. It has standard communication interfaces like SPI and I2C, which allow for easy communication with other devices.

  7. Question: What is the power consumption of the ATTINY13V-10PQ?
    Answer: The ATTINY13V-10PQ is designed to be low-power, making it suitable for battery-powered applications. It has various power-saving modes and can operate at very low power levels, depending on the specific application requirements.

  8. Question: Can I use the ATTINY13V-10PQ in industrial environments?
    Answer: Yes, the ATTINY13V-10PQ is suitable for use in industrial environments. It has a wide operating temperature range and can withstand harsh conditions when properly designed into the system.

  9. Question: Are there any limitations or considerations when using the ATTINY13V-10PQ?
    Answer: Some considerations include limited program and data memory compared to larger microcontrollers, limited number of I/O pins, and lower clock speed. However, these limitations can often be overcome by careful design and optimization.

  10. Question: Where can I find more information about the ATTINY13V-10PQ?
    Answer: You can find more detailed information about the ATTINY13V-10PQ in the datasheet provided by Microchip Technology. Additionally, online forums, tutorials, and application notes can provide further guidance and examples for using this microcontroller in technical solutions.