이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
ATTINY25GAL-15MZ

ATTINY25GAL-15MZ

Product Overview

Category

The ATTINY25GAL-15MZ belongs to the category of microcontrollers.

Use

It is commonly used for various electronic applications that require a compact and low-power microcontroller.

Characteristics

  • Low power consumption
  • Small form factor
  • High performance
  • Versatile functionality

Package

The ATTINY25GAL-15MZ is available in a surface-mount package.

Essence

This microcontroller is designed to provide efficient processing capabilities while consuming minimal power, making it suitable for battery-powered devices and other low-power applications.

Packaging/Quantity

The ATTINY25GAL-15MZ is typically sold in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Microcontroller architecture: AVR
  • Flash memory: 2KB
  • RAM: 128 bytes
  • Operating voltage: 1.8V - 5.5V
  • Clock speed: 16MHz
  • Digital I/O pins: 6
  • Analog input channels: 4
  • Communication interfaces: SPI, I2C, UART
  • Timers/counters: 2
  • PWM channels: 3
  • ADC resolution: 10-bit

Detailed Pin Configuration

The ATTINY25GAL-15MZ has a total of 8 pins, which are assigned specific functions as follows:

  1. VCC: Power supply voltage
  2. GND: Ground
  3. PB5 (RESET): Reset pin
  4. PB3 (MOSI): Master Out Slave In (SPI)
  5. PB4 (MISO): Master In Slave Out (SPI)
  6. PB2 (SCK): Serial Clock (SPI)
  7. PB0 (ADC0): Analog-to-Digital Converter input
  8. PB1 (ADC1): Analog-to-Digital Converter input

Functional Features

  • Low power consumption: The ATTINY25GAL-15MZ is optimized for low-power applications, making it ideal for battery-powered devices.
  • Versatile I/O capabilities: With 6 digital I/O pins and 4 analog input channels, this microcontroller offers flexibility in interfacing with various sensors and peripherals.
  • Communication interfaces: It supports popular communication protocols such as SPI, I2C, and UART, enabling seamless integration with other devices.
  • Timers and PWM: The two built-in timers/counters and three PWM channels allow precise timing control and generation of analog-like signals.

Advantages and Disadvantages

Advantages

  • Compact size and low power consumption make it suitable for portable and battery-operated devices.
  • Versatile I/O capabilities enable interfacing with a wide range of sensors and peripherals.
  • Support for multiple communication interfaces simplifies integration with other devices.
  • High-performance microcontroller with sufficient memory and processing power for many applications.

Disadvantages

  • Limited number of I/O pins may restrict the complexity of projects that can be implemented.
  • Small form factor and surface-mount package may require specialized soldering techniques for assembly and repair.

Working Principles

The ATTINY25GAL-15MZ operates based on the AVR architecture. It executes instructions stored in its flash memory to perform various tasks. The microcontroller communicates with external devices through its I/O pins and interfaces, enabling data exchange and control.

Detailed Application Field Plans

The ATTINY25GAL-15MZ finds applications in various fields, including but not limited to: - Home automation systems - Wearable devices - Internet of Things (IoT) applications - Sensor networks - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the ATTINY25GAL-15MZ microcontroller include: - ATTINY45GAL-15MZ: Similar specifications but with additional I/O pins - ATTINY85GAL-15MZ: Higher flash memory and more I/O pins - ATTINY13GAL-15MZ: Lower flash memory and fewer I/O pins, suitable for simpler applications

These alternative models provide options with varying capabilities to suit different project requirements.

In conclusion, the ATTINY25GAL-15MZ is a compact and low-power microcontroller that offers versatile functionality for a wide range of electronic applications. Its small form factor, high performance, and support for various communication interfaces make it an attractive choice for many projects. However, its limited number of I/O pins and surface-mount package may pose challenges in certain scenarios.

기술 솔루션에 ATTINY25GAL-15MZ 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of ATTINY25GAL-15MZ in technical solutions:

  1. Q: What is the ATTINY25GAL-15MZ microcontroller used for? A: The ATTINY25GAL-15MZ is a microcontroller commonly used for various embedded systems and low-power applications.

  2. Q: What is the operating voltage range of ATTINY25GAL-15MZ? A: The operating voltage range of ATTINY25GAL-15MZ is typically between 1.8V and 5.5V.

  3. Q: How much flash memory does ATTINY25GAL-15MZ have? A: ATTINY25GAL-15MZ has 2KB of flash memory, which can be used for storing program code.

  4. Q: Can I use ATTINY25GAL-15MZ for analog signal processing? A: Yes, ATTINY25GAL-15MZ has an integrated 10-bit ADC (Analog-to-Digital Converter) that allows you to process analog signals.

  5. Q: What communication interfaces are supported by ATTINY25GAL-15MZ? A: ATTINY25GAL-15MZ supports SPI (Serial Peripheral Interface) and I2C (Inter-Integrated Circuit) communication interfaces.

  6. Q: Is ATTINY25GAL-15MZ suitable for battery-powered applications? A: Yes, ATTINY25GAL-15MZ is designed for low-power applications and can operate efficiently on battery power.

  7. Q: Can I use ATTINY25GAL-15MZ for controlling motors or other high-power devices? A: No, ATTINY25GAL-15MZ has limited current sourcing capabilities and may not be suitable for directly driving high-power devices. You may need additional driver circuits.

  8. Q: What programming languages can be used with ATTINY25GAL-15MZ? A: ATTINY25GAL-15MZ can be programmed using various languages, including C and assembly language.

  9. Q: Can I use ATTINY25GAL-15MZ in industrial applications? A: Yes, ATTINY25GAL-15MZ is suitable for a wide range of industrial applications due to its small size, low power consumption, and robustness.

  10. Q: Are there any development tools available for programming ATTINY25GAL-15MZ? A: Yes, there are several development tools available, such as Atmel Studio, Arduino IDE, and other third-party software, that support programming and debugging of ATTINY25GAL-15MZ microcontrollers.

Please note that the specific details and answers may vary depending on the application and requirements.