Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
ATTINY414-SSFR
자세히보기 데이터시트

ATTINY414-SSFR

Product Overview

Category

The ATTINY414-SSFR belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems.

Characteristics

  • Low power consumption
  • High performance
  • Small form factor
  • Versatile functionality

Package

The ATTINY414-SSFR is available in a surface-mount package (SSFR).

Essence

This microcontroller is designed to provide efficient and reliable control for electronic applications.

Packaging/Quantity

The ATTINY414-SSFR is typically packaged in reels or tubes, with varying quantities depending on the supplier.

Specifications

  • Microcontroller architecture: AVR
  • CPU speed: 20 MHz
  • Flash memory: 4 KB
  • SRAM: 256 bytes
  • EEPROM: 128 bytes
  • Digital I/O pins: 14
  • Analog input channels: 8
  • Communication interfaces: SPI, I2C, UART
  • Operating voltage: 1.8V - 5.5V
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The ATTINY414-SSFR features a total of 20 pins, each serving a specific purpose. The pin configuration is as follows:

  1. RESET
  2. VCC
  3. GND
  4. PA0
  5. PA1
  6. PA2
  7. PA3
  8. PA4
  9. PA5
  10. PA6
  11. PA7
  12. PB0
  13. PB1
  14. PB2
  15. PB3
  16. PB4
  17. PB5
  18. PB6
  19. PB7
  20. AVCC

Functional Features

  • Advanced RISC architecture for efficient processing
  • Multiple communication interfaces for seamless integration
  • Built-in analog-to-digital converter (ADC) for precise measurements
  • Timers and counters for accurate timing control
  • Interrupt handling for real-time event response
  • Power-saving modes to optimize energy consumption

Advantages and Disadvantages

Advantages

  • Low power consumption extends battery life in portable devices.
  • High-performance capabilities enable complex applications.
  • Small form factor allows for compact designs.
  • Versatile functionality supports a wide range of applications.

Disadvantages

  • Limited memory capacity may restrict the complexity of certain applications.
  • Lack of built-in peripherals may require additional external components for specific functionalities.

Working Principles

The ATTINY414-SSFR operates based on the AVR microcontroller architecture. It executes instructions stored in its flash memory, utilizing various hardware modules and peripherals to perform desired tasks. The microcontroller communicates with external devices through its communication interfaces, processes data from sensors using the built-in ADC, and controls output signals through digital I/O pins.

Detailed Application Field Plans

The ATTINY414-SSFR finds applications in diverse fields, including but not limited to: - Home automation systems - Internet of Things (IoT) devices - Industrial control systems - Consumer electronics - Automotive electronics - Medical devices

Detailed and Complete Alternative Models

  • ATTINY412-SSFR
  • ATTINY416-SSFR
  • ATTINY402-SSFR
  • ATTINY406-SSFR
  • ATTINY414-MU
  • ATTINY414-MUR

These alternative models offer similar functionalities and characteristics, providing flexibility in choosing the most suitable microcontroller for specific applications.

In conclusion, the ATTINY414-SSFR is a versatile microcontroller that combines low power consumption, high performance, and a small form factor. With its advanced features and wide range of applications, it serves as a reliable solution for various electronic devices and embedded systems.

기술 솔루션에 ATTINY414-SSFR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of ATTINY414-SSFR in technical solutions:

  1. Q: What is the ATTINY414-SSFR microcontroller used for? A: The ATTINY414-SSFR is a microcontroller that can be used in various technical solutions, such as IoT devices, home automation systems, and industrial control applications.

  2. Q: What are the key features of the ATTINY414-SSFR? A: The ATTINY414-SSFR offers features like low power consumption, high-performance CPU, multiple communication interfaces (UART, SPI, I2C), analog-to-digital converters, and programmable I/O pins.

  3. Q: Can the ATTINY414-SSFR be programmed using Arduino IDE? A: Yes, the ATTINY414-SSFR can be programmed using the Arduino IDE with the help of the "ATTinyCore" library.

  4. Q: How much flash memory does the ATTINY414-SSFR have? A: The ATTINY414-SSFR has 4KB of flash memory, which can be used to store program code.

  5. Q: Does the ATTINY414-SSFR support interrupts? A: Yes, the ATTINY414-SSFR supports both external and internal interrupts, allowing for efficient event-driven programming.

  6. Q: Can the ATTINY414-SSFR communicate with other devices? A: Yes, the ATTINY414-SSFR has built-in UART, SPI, and I2C interfaces, enabling communication with other devices such as sensors, displays, and wireless modules.

  7. Q: What is the operating voltage range of the ATTINY414-SSFR? A: The ATTINY414-SSFR operates within a voltage range of 1.8V to 5.5V, making it compatible with a wide range of power supply options.

  8. Q: Can the ATTINY414-SSFR be used in battery-powered applications? A: Yes, the low power consumption of the ATTINY414-SSFR makes it suitable for battery-powered applications where energy efficiency is crucial.

  9. Q: Does the ATTINY414-SSFR have built-in analog-to-digital converters (ADC)? A: Yes, the ATTINY414-SSFR has a 10-bit ADC, allowing it to read analog signals from sensors or other external devices.

  10. Q: Is the ATTINY414-SSFR suitable for real-time applications? A: While the ATTINY414-SSFR is not specifically designed for real-time applications, it can handle time-sensitive tasks with proper programming techniques and careful consideration of timing constraints.

Please note that these answers are general and may vary depending on specific use cases and requirements.