DSPIC33EP128GM706-I/MR
Basic Information Overview
- Category: Microcontroller
- Use: Embedded systems, control applications
- Characteristics:
- High-performance digital signal controller
- 16-bit architecture
- Integrated peripherals for various applications
- Package: 64-pin QFN
- Essence: Advanced microcontroller for control applications
- Packaging/Quantity: Tape and reel, 250 units per reel
Specifications
- Processor Core: dsPIC33E
- CPU Speed: Up to 70 MIPS
- Flash Memory: 128 KB
- RAM: 16 KB
- Operating Voltage Range: 2.5V to 3.6V
- Temperature Range: -40°C to +85°C
- Analog-to-Digital Converter (ADC): 10-bit, up to 24 channels
- Digital-to-Analog Converter (DAC): 12-bit, up to 4 channels
- Communication Interfaces: UART, SPI, I2C, CAN
- Timers: 16-bit and 32-bit timers available
- PWM Channels: Up to 9 channels
- Input Capture/Output Compare (IC/OC) Modules: Up to 8 modules
Detailed Pin Configuration
The DSPIC33EP128GM706-I/MR has a total of 64 pins. The pin configuration is as follows:
- VDD
- VSS
- AN0/RB0
- AN1/RB1
- AN2/RB2
- AN3/RB3
- AN4/RB4
- AN5/RB5
- AN6/RB6
- AN7/RB7
- AN8/RB8
- AN9/RB9
- AN10/RB10
- AN11/RB11
- AN12/RB12
- AN13/RB13
- AN14/RB14
- AN15/RB15
- VCAP
- AVDD
- AVSS
- VREF+
- VREF-
- CVREF
- TMS/RC13
- TCK/RC14
- TDO/RC15
- TDI/RC12
- OSC1/CLKI/RA4
- OSC2/CLKO/RA5
- REFO/RA0
- VBUS/RA1
- USBID/RA2
- U1RX/RF4
- U1TX/RF5
- SDA1/RF3
- SCL1/RF2
- SS1/RF6
- SDO1/RF8
- SDI1/RF7
- C1INA/RE0
- C1INB/RE1
- C2INA/RE2
- C2INB/RE3
- C3INA/RE4
- C3INB/RE5
- C4INA/RE6
- C4INB/RE7
- C5INA/RE8
- C5INB/RE9
- C6INA/RE10
- C6INB/RE11
- C7INA/RE12
- C7INB/RE13
- C8INA/RE14
- C8INB/RE15
- MCLR/VPP/RE3
- PGD/RF0
- PGC/RF1
- VSS
- VDD
- OSCO/RC13
- OSCIO/RC14
- VCAP
Functional Features
- High-performance digital signal processing capabilities
- Integrated peripherals for various control applications
- Efficient power management features
- Enhanced connectivity options
- Advanced analog-to-digital and digital-to-analog conversion capabilities
- Flexible timer and PWM channels for precise timing control
- Robust communication interfaces for data exchange
- Comprehensive input capture/output compare modules for versatile control
Advantages
- High processing speed (up to 70 MIPS)
- Ample flash memory and RAM for complex applications
- Wide operating voltage range for flexibility
- Extensive analog and digital I/O capabilities
- Support for multiple communication protocols
- Rich set of timers and PWM channels for precise control
- Reliable and robust design for industrial applications
Disadvantages
- Limited package options
- Higher cost compared to lower-end microcontrollers
- Steeper learning curve for beginners due to advanced features
Working Principles
The DSPIC33EP128GM706-I/MR is based on the
기술 솔루션에 DSPIC33EP128GM706-I/MR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is the maximum operating frequency of DSPIC33EP128GM706-I/MR?
- The maximum operating frequency of DSPIC33EP128GM706-I/MR is 70 MHz.
What are the key features of DSPIC33EP128GM706-I/MR?
- The key features of DSPIC33EP128GM706-I/MR include high performance, integrated peripherals, and low power consumption.
Can DSPIC33EP128GM706-I/MR be used for motor control applications?
- Yes, DSPIC33EP128GM706-I/MR is well-suited for motor control applications due to its advanced PWM modules and motor control peripherals.
Does DSPIC33EP128GM706-I/MR support communication interfaces?
- Yes, DSPIC33EP128GM706-I/MR supports various communication interfaces such as UART, SPI, I2C, and CAN.
What development tools are available for programming DSPIC33EP128GM706-I/MR?
- Development tools such as MPLAB X IDE and MPLAB Code Configurator can be used for programming DSPIC33EP128GM706-I/MR.
Is DSPIC33EP128GM706-I/MR suitable for digital power supply applications?
- Yes, DSPIC33EP128GM706-I/MR is suitable for digital power supply applications with its high-resolution PWM and analog-to-digital converter (ADC) features.
What are the recommended operating conditions for DSPIC33EP128GM706-I/MR?
- The recommended operating voltage range for DSPIC33EP128GM706-I/MR is 2.25V to 3.6V, and the temperature range is -40°C to 125°C.
Can DSPIC33EP128GM706-I/MR be used in safety-critical applications?
- Yes, DSPIC33EP128GM706-I/MR is designed to meet safety-critical standards and can be used in applications requiring high reliability.
Are there any application notes or reference designs available for DSPIC33EP128GM706-I/MR?
- Yes, Microchip provides application notes and reference designs to assist in implementing DSPIC33EP128GM706-I/MR in various technical solutions.
What are the memory and storage options available in DSPIC33EP128GM706-I/MR?
- DSPIC33EP128GM706-I/MR features up to 128 KB of flash memory and 16 KB of RAM, providing ample space for program and data storage.