Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
DSPIC33EP256GM304-I/ML
자세히보기 데이터시트

DSPIC33EP256GM304-I/ML

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded systems, control applications
  • Characteristics: High performance, low power consumption, integrated peripherals
  • Package: 44-pin QFN (Quad Flat No-Lead)
  • Essence: Digital Signal Controller (DSC) with advanced features
  • Packaging/Quantity: Tray, 160 units per tray

Specifications

  • Architecture: dsPIC33E
  • CPU Speed: Up to 70 MIPS
  • Flash Memory: 256 KB
  • RAM: 16 KB
  • Operating Voltage: 2.5V - 3.6V
  • Temperature Range: -40°C to +85°C
  • Analog-to-Digital Converter (ADC): 10-bit, up to 24 channels
  • Digital-to-Analog Converter (DAC): 12-bit, up to 4 channels
  • Communication Interfaces: UART, SPI, I2C, CAN
  • Timers: 16-bit and 32-bit timers
  • PWM Channels: Up to 9
  • Input Capture/Output Compare (IC/OC) Modules: Up to 8
  • Integrated Op-Amps: Up to 4
  • Operating Current: 11 mA (typical)

Detailed Pin Configuration

The DSPIC33EP256GM304-I/ML microcontroller has a total of 44 pins. Here is the pin configuration:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. OSC1/CLKI - Oscillator input/Clock input
  4. OSC2/CLKO - Oscillator output/Clock output
  5. AN0 - Analog input channel 0
  6. AN1 - Analog input channel 1
  7. AN2 - Analog input channel 2
  8. AN3 - Analog input channel 3
  9. AN4 - Analog input channel 4
  10. AN5 - Analog input channel 5
  11. AN6 - Analog input channel 6
  12. AN7 - Analog input channel 7
  13. VREF- - Reference voltage negative terminal
  14. VREF+ - Reference voltage positive terminal
  15. AVSS - Analog ground
  16. AVDD - Analog power supply voltage
  17. REFO - Reference output
  18. TMS - JTAG Test Mode Select
  19. TCK - JTAG Test Clock
  20. TDO - JTAG Test Data Out
  21. TDI - JTAG Test Data In
  22. TRST - JTAG Test Reset
  23. RP0 - Remappable pin 0
  24. RP1 - Remappable pin 1
  25. RP2 - Remappable pin 2
  26. RP3 - Remappable pin 3
  27. RP4 - Remappable pin 4
  28. RP5 - Remappable pin 5
  29. RP6 - Remappable pin 6
  30. RP7 - Remappable pin 7
  31. RP8 - Remappable pin 8
  32. RP9 - Remappable pin 9
  33. RP10 - Remappable pin 10
  34. RP11 - Remappable pin 11
  35. RP12 - Remappable pin 12
  36. RP13 - Remappable pin 13
  37. RP14 - Remappable pin 14
  38. RP15 - Remappable pin 15
  39. RP16 - Remappable pin 16
  40. RP17 - Remappable pin 17
  41. RP18 - Remappable pin 18
  42. RP19 - Remappable pin 19
  43. RP20 - Remappable pin 20
  44. RP21 - Remappable pin 21

Functional Features

  • High-performance digital signal processing capabilities
  • Integrated peripherals for various control applications
  • Efficient power management for low power consumption
  • Flexible and easy-to-use development tools and software libraries
  • Enhanced connectivity options with multiple communication interfaces
  • Advanced analog features for precise measurement and control
  • Robust protection mechanisms for reliable operation in harsh environments

Advantages and Disadvantages

Advantages: - High performance and processing capabilities - Low power consumption - Integrated peripherals reduce external component count - Wide temperature range for versatile applications - Extensive development tools and software support

Disadvantages: - Limited availability of alternative models - Higher cost compared to some other microcontrollers - Steeper learning curve for beginners due to advanced features

Working Principles

The DSPIC33EP256GM304-I/ML microcontroller operates based on the dsPIC33E architecture. It combines the functionalities of a microcontroller and a digital signal processor (DSP). The core of the microcontroller executes instructions at high speed, allowing for efficient control and signal processing tasks. The integrated peripherals provide additional functionality, such as

기술 솔루션에 DSPIC33EP256GM304-I/ML 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum operating frequency of DSPIC33EP256GM304-I/ML?

    • The maximum operating frequency of DSPIC33EP256GM304-I/ML is 70 MHz.

  2. What are the key features of DSPIC33EP256GM304-I/ML?

    • DSPIC33EP256GM304-I/ML features high performance, integrated peripherals, and low power consumption, making it suitable for a wide range of technical solutions.

  3. Can DSPIC33EP256GM304-I/ML be used in motor control applications?

    • Yes, DSPIC33EP256GM304-I/ML is well-suited for motor control applications due to its advanced PWM modules and high-resolution analog-to-digital converters.

  4. Does DSPIC33EP256GM304-I/ML support communication interfaces?

    • Yes, DSPIC33EP256GM304-I/ML supports various communication interfaces such as UART, SPI, I2C, and CAN.

  5. What development tools are available for programming DSPIC33EP256GM304-I/ML?

    • Development tools such as MPLAB X IDE and MPLAB XC compilers can be used for programming DSPIC33EP256GM304-I/ML.

  6. Is DSPIC33EP256GM304-I/ML suitable for power supply applications?

    • Yes, DSPIC33EP256GM304-I/ML is suitable for power supply applications with its integrated high-speed ADCs and digital-to-analog converters.

  7. Can DSPIC33EP256GM304-I/ML be used in audio processing applications?

    • Yes, DSPIC33EP256GM304-I/ML can be used in audio processing applications due to its high-performance DSP engine and flexible peripherals.

  8. What are the available memory options for DSPIC33EP256GM304-I/ML?

    • DSPIC33EP256GM304-I/ML offers up to 256 KB of flash memory and 16 KB of RAM.

  9. Does DSPIC33EP256GM304-I/ML have built-in security features?

    • Yes, DSPIC33EP256GM304-I/ML provides hardware security features such as code protection and flash memory write protection.

  10. Is DSPIC33EP256GM304-I/ML suitable for industrial control applications?

    • Yes, DSPIC33EP256GM304-I/ML is well-suited for industrial control applications with its robust set of integrated peripherals and high computational performance.