DSPIC33FJ256MC710AT-I/PF
Overview
- Category: Microcontroller
- Use: Embedded systems, control applications
- Characteristics: High performance, low power consumption, integrated peripherals
- Package: 100-pin TQFP
- Essence: Digital Signal Controller (DSC)
- Packaging/Quantity: Tray, 160 units per tray
Specifications
- Architecture: dsPIC
- CPU Speed: 40 MIPS
- Flash Memory: 256 KB
- RAM: 30 KB
- Operating Voltage: 2.5V - 3.6V
- Temperature Range: -40°C to +85°C
- ADC Resolution: 10-bit
- PWM Channels: 9
- I/O Pins: 85
- Communication Interfaces: UART, SPI, I2C, CAN
Pin Configuration
The DSPIC33FJ256MC710AT-I/PF microcontroller has a total of 100 pins. The pin configuration is as follows:
- VDDCORE
- VSSCORE
- AVDD
- AVSS
- VCAP
- VDD
- VSS
- OSC1/CLKI
- OSC2/CLKO
- REFO/AN0/CN2/RP0
- AN1/CN3/RP1
- AN2/CN4/RP2
- AN3/CN5/RP3
- AN4/CN6/RP4
- AN5/CN7/RP5
- AN6/CN8/RP6
- AN7/CN9/RP7
- AN8/CN10/RP8
- AN9/CN11/RP9
- AN10/CN12/RP10
- AN11/CN13/RP11
- AN12/CN14/RP12
- AN13/CN15/RP13
- AN14/CN16/RP14
- AN15/CN17/RP15
- AVSS
- AVDD
- VCAP
- VSS
- VDD
- REFO/AN0/CN2/RP0
- AN1/CN3/RP1
- AN2/CN4/RP2
- AN3/CN5/RP3
- AN4/CN6/RP4
- AN5/CN7/RP5
- AN6/CN8/RP6
- AN7/CN9/RP7
- AN8/CN10/RP8
- AN9/CN11/RP9
- AN10/CN12/RP10
- AN11/CN13/RP11
- AN12/CN14/RP12
- AN13/CN15/RP13
- AN14/CN16/RP14
- AN15/CN17/RP15
- VSS
- VDD
- REFO/AN0/CN2/RP0
- AN1/CN3/RP1
- AN2/CN4/RP2
- AN3/CN5/RP3
- AN4/CN6/RP4
- AN5/CN7/RP5
- AN6/CN8/RP6
- AN7/CN9/RP7
- AN8/CN10/RP8
- AN9/CN11/RP9
- AN10/CN12/RP10
- AN11/CN13/RP11
- AN12/CN14/RP12
- AN13/CN15/RP13
- AN14/CN16/RP14
- AN15/CN17/RP15
- VSS
- VDD
- REFO/AN0/CN2/RP0
- AN1/CN3/RP1
- AN2/CN4/RP2
- AN3/CN5/RP3
- AN4/CN6/RP4
- AN5/CN7/RP5
- AN6/CN8/RP6
- AN7/CN9/RP7
- AN8/CN10/RP8
- AN9/CN11/RP9
- AN10/CN12/RP10
- AN11/CN13/RP11
- AN12/CN14/RP12
- AN13/CN15/RP13
기술 솔루션에 DSPIC33FJ256MC710AT-I/PF 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is the maximum operating frequency of DSPIC33FJ256MC710AT-I/PF?
- The maximum operating frequency of DSPIC33FJ256MC710AT-I/PF is 40 MHz.
What are the key features of DSPIC33FJ256MC710AT-I/PF?
- DSPIC33FJ256MC710AT-I/PF features high performance, integrated peripherals, and a wide operating voltage range.
Can DSPIC33FJ256MC710AT-I/PF be used for motor control applications?
- Yes, DSPIC33FJ256MC710AT-I/PF is well-suited for motor control applications due to its advanced PWM modules and motor control peripherals.
What communication interfaces are supported by DSPIC33FJ256MC710AT-I/PF?
- DSPIC33FJ256MC710AT-I/PF supports various communication interfaces including SPI, I2C, UART, and CAN.
Is DSPIC33FJ256MC710AT-I/PF suitable for power supply applications?
- Yes, DSPIC33FJ256MC710AT-I/PF is suitable for power supply applications due to its high-speed ADC and PWM capabilities.
What development tools are available for programming DSPIC33FJ256MC710AT-I/PF?
- Development tools such as MPLAB X IDE and MPLAB XC compilers can be used for programming DSPIC33FJ256MC710AT-I/PF.
Does DSPIC33FJ256MC710AT-I/PF support digital signal processing algorithms?
- Yes, DSPIC33FJ256MC710AT-I/PF supports digital signal processing algorithms through its high-performance DSP engine.
What are the recommended operating conditions for DSPIC33FJ256MC710AT-I/PF?
- The recommended operating voltage range for DSPIC33FJ256MC710AT-I/PF is 2.5V to 5.5V, with a maximum temperature of 125°C.
Can DSPIC33FJ256MC710AT-I/PF be used in automotive applications?
- Yes, DSPIC33FJ256MC710AT-I/PF is suitable for automotive applications due to its robust design and AEC-Q100 qualification.
Are there any application notes or reference designs available for DSPIC33FJ256MC710AT-I/PF?
- Yes, Microchip provides application notes and reference designs to assist in implementing DSPIC33FJ256MC710AT-I/PF in various technical solutions.