이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MIC2179-5.0YSM

MIC2179-5.0YSM

Product Overview

Category

MIC2179-5.0YSM belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 4.5V to 16V
  • Output Voltage: 5.0V
  • Maximum Output Current: 500mA
  • Low Dropout Voltage: 200mV at 500mA
  • Low Quiescent Current: 75µA
  • Thermal Shutdown Protection
  • Short-Circuit Protection
  • Small Package Size: SOT-23-5

Package

MIC2179-5.0YSM is available in a small SOT-23-5 package, which is suitable for space-constrained applications.

Essence

The essence of MIC2179-5.0YSM lies in its ability to provide a stable output voltage of 5.0V with low dropout voltage and quiescent current.

Packaging/Quantity

MIC2179-5.0YSM is typically sold in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V to 16V
  • Output Voltage: 5.0V
  • Output Current: Up to 500mA
  • Dropout Voltage: 200mV at 500mA
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to +125°C
  • Package Type: SOT-23-5

Detailed Pin Configuration

MIC2179-5.0YSM has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. NC (No Connection)
  4. VOUT (Output Voltage)
  5. EN (Enable)

Functional Features

  • Wide Input Voltage Range: MIC2179-5.0YSM can accept input voltages ranging from 4.5V to 16V, making it suitable for various applications.
  • Stable Output Voltage: It provides a regulated output voltage of 5.0V, ensuring consistent performance of connected devices.
  • Low Dropout Voltage: The dropout voltage of only 200mV at 500mA allows efficient power conversion even with low input-output differentials.
  • Low Quiescent Current: With a quiescent current of only 75µA, the regulator minimizes power consumption when the load is light.
  • Thermal Shutdown Protection: MIC2179-5.0YSM incorporates thermal shutdown protection, preventing damage due to excessive temperature.
  • Short-Circuit Protection: It features built-in short-circuit protection, safeguarding the regulator and connected components from damage.

Advantages and Disadvantages

Advantages

  • Wide input voltage range enables versatile application possibilities.
  • Stable output voltage ensures reliable operation of connected devices.
  • Low dropout voltage allows efficient power conversion.
  • Low quiescent current minimizes power consumption.
  • Thermal shutdown and short-circuit protection enhance safety and reliability.

Disadvantages

  • Limited maximum output current of 500mA may not be sufficient for high-power applications.
  • SOT-23-5 package size may pose challenges in heat dissipation for certain designs.

Working Principles

MIC2179-5.0YSM operates as a linear voltage regulator. It uses a feedback mechanism to maintain a constant output voltage of 5.0V, regardless of variations in the input voltage or load conditions. The regulator compares the output voltage with a reference voltage and adjusts the internal circuitry to achieve the desired output. It regulates the voltage by dissipating excess energy as heat, which is why it has a maximum current rating and may require additional heat sinking in high-power applications.

Detailed Application Field Plans

MIC2179-5.0YSM finds applications in various electronic systems that require a stable 5.0V power supply. Some potential application fields include:

  1. Embedded Systems: It can be used to power microcontrollers, sensors, and other components in embedded systems.
  2. Consumer Electronics: MIC2179-5.0YSM can provide regulated power for portable devices, such as smartphones, tablets, and portable audio players.
  3. Automotive Electronics: It can be employed in automotive applications, powering infotainment systems, navigation units, and other electronic modules.
  4. Industrial Control Systems: The regulator can be utilized in industrial control systems, providing stable voltage for PLCs, motor drives, and other control circuitry.
  5. Telecommunications: It can be integrated into telecommunications equipment, ensuring a reliable power source for routers, switches, and communication modules.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MIC2179-5.0YSM

기술 솔루션에 MIC2179-5.0YSM 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MIC2179-5.0YSM in technical solutions:

  1. Q: What is MIC2179-5.0YSM? A: MIC2179-5.0YSM is a specific model of voltage regulator IC (integrated circuit) manufactured by Microchip Technology.

  2. Q: What is the input voltage range for MIC2179-5.0YSM? A: The input voltage range for MIC2179-5.0YSM is typically between 4.5V and 60V.

  3. Q: What is the output voltage of MIC2179-5.0YSM? A: The output voltage of MIC2179-5.0YSM is fixed at 5.0V.

  4. Q: What is the maximum output current of MIC2179-5.0YSM? A: The maximum output current of MIC2179-5.0YSM is typically 500mA.

  5. Q: Can MIC2179-5.0YSM handle both step-up and step-down voltage regulation? A: No, MIC2179-5.0YSM is specifically designed for step-down (buck) voltage regulation only.

  6. Q: What is the efficiency of MIC2179-5.0YSM? A: The efficiency of MIC2179-5.0YSM can vary depending on the input and output voltage levels, but it is typically around 90%.

  7. Q: Is MIC2179-5.0YSM suitable for battery-powered applications? A: Yes, MIC2179-5.0YSM is suitable for battery-powered applications as it has low quiescent current and supports low dropout voltage.

  8. Q: Can MIC2179-5.0YSM handle high input voltage transients? A: Yes, MIC2179-5.0YSM has built-in protection features to handle high input voltage transients and protect the circuitry.

  9. Q: What are the typical applications of MIC2179-5.0YSM? A: MIC2179-5.0YSM is commonly used in various technical solutions such as industrial automation, automotive electronics, power supplies, and LED lighting.

  10. Q: Are there any specific design considerations when using MIC2179-5.0YSM? A: Yes, it is important to consider factors like input/output capacitor selection, thermal management, and PCB layout guidelines provided in the datasheet for optimal performance.

Please note that the answers provided here are general and may vary depending on the specific requirements and conditions of your application. It is always recommended to refer to the datasheet and consult with technical experts for accurate information.