이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MIC2211-FQBML-TR

MIC2211-FQBML-TR

Product Overview

Category

The MIC2211-FQBML-TR belongs to the category of integrated circuits (ICs).

Use

This product is commonly used as a voltage regulator in various electronic devices.

Characteristics

  • Low dropout voltage
  • High output accuracy
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit current limit

Package

The MIC2211-FQBML-TR is available in a small 8-pin QFN package.

Essence

The essence of this product lies in its ability to regulate voltage efficiently and accurately, ensuring stable power supply for electronic devices.

Packaging/Quantity

The MIC2211-FQBML-TR is typically packaged in reels containing a quantity of 3000 units.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.2V to 3.6V
  • Dropout Voltage: 150mV at 150mA
  • Quiescent Current: 35µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MIC2211-FQBML-TR has the following pin configuration:

  1. EN (Enable)
  2. GND (Ground)
  3. FB (Feedback)
  4. VOUT (Output Voltage)
  5. VIN (Input Voltage)
  6. BYP (Bypass Capacitor)
  7. NC (No Connection)
  8. PG (Power Good)

Functional Features

  • Low Dropout Voltage: The MIC2211-FQBML-TR exhibits a low dropout voltage, ensuring efficient power conversion even when the input voltage is close to the desired output voltage.
  • High Output Accuracy: This voltage regulator provides high output accuracy, minimizing voltage fluctuations and ensuring stable operation of connected devices.
  • Low Quiescent Current: With a low quiescent current, the MIC2211-FQBML-TR minimizes power consumption when the load is light or in standby mode.
  • Thermal Shutdown Protection: The product incorporates thermal shutdown protection, preventing damage due to excessive heat.
  • Short-Circuit Current Limit: The MIC2211-FQBML-TR features short-circuit current limit protection, safeguarding against potential damage caused by short circuits.

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation
  • High output accuracy
  • Low power consumption
  • Thermal protection
  • Short-circuit protection

Disadvantages

  • Limited input voltage range (2.7V to 5.5V)
  • Restricted output voltage range (1.2V to 3.6V)

Working Principles

The MIC2211-FQBML-TR operates as a linear voltage regulator. It regulates the output voltage by adjusting the resistance between the input and output terminals, ensuring that the desired output voltage is maintained regardless of changes in the input voltage or load conditions.

Detailed Application Field Plans

The MIC2211-FQBML-TR finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Digital cameras - Wireless communication devices

Detailed and Complete Alternative Models

Some alternative models to the MIC2211-FQBML-TR include: - MIC5219-3.3YM5-TR - LT1763CS8-3.3#PBF - TPS79333DBVR

These models offer similar functionality and can be used as alternatives depending on specific requirements and availability.

Word count: 361 words

기술 솔루션에 MIC2211-FQBML-TR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MIC2211-FQBML-TR in technical solutions:

Q1: What is the MIC2211-FQBML-TR? A1: The MIC2211-FQBML-TR is a voltage regulator IC (integrated circuit) that provides a regulated output voltage from an input voltage source.

Q2: What is the input voltage range for the MIC2211-FQBML-TR? A2: The input voltage range for the MIC2211-FQBML-TR is typically between 2.7V and 5.5V.

Q3: What is the output voltage range of the MIC2211-FQBML-TR? A3: The output voltage range of the MIC2211-FQBML-TR can be adjusted using external resistors, but it typically ranges from 0.8V to 5.5V.

Q4: What is the maximum output current of the MIC2211-FQBML-TR? A4: The maximum output current of the MIC2211-FQBML-TR is 500mA.

Q5: Can the MIC2211-FQBML-TR be used in battery-powered applications? A5: Yes, the MIC2211-FQBML-TR can be used in battery-powered applications as it has a low quiescent current and operates efficiently with low input voltages.

Q6: Does the MIC2211-FQBML-TR have built-in thermal protection? A6: Yes, the MIC2211-FQBML-TR has built-in thermal shutdown protection to prevent overheating.

Q7: Can the MIC2211-FQBML-TR operate in a wide temperature range? A7: Yes, the MIC2211-FQBML-TR can operate in a temperature range of -40°C to +125°C.

Q8: Is the MIC2211-FQBML-TR suitable for space-constrained applications? A8: Yes, the MIC2211-FQBML-TR is available in a small SOT-23 package, making it suitable for space-constrained applications.

Q9: Can the output voltage of the MIC2211-FQBML-TR be adjusted dynamically? A9: Yes, the output voltage of the MIC2211-FQBML-TR can be adjusted dynamically using an external resistor divider network.

Q10: What are some typical applications of the MIC2211-FQBML-TR? A10: The MIC2211-FQBML-TR is commonly used in portable devices, battery-powered systems, IoT (Internet of Things) devices, and other low-power applications where voltage regulation is required.

Please note that these answers are general and may vary depending on the specific requirements and datasheet of the MIC2211-FQBML-TR.