이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MIC2211-GSBML-TR

MIC2211-GSBML-TR

Product Overview

Category

MIC2211-GSBML-TR belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management purposes.

Characteristics

  • Voltage regulation
  • Power management
  • Small form factor
  • Low power consumption

Package

The MIC2211-GSBML-TR is available in a small outline package (SOP) with a specific pin configuration.

Essence

The essence of MIC2211-GSBML-TR lies in its ability to regulate voltage efficiently, ensuring stable power supply to electronic devices.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.2V to 3.6V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 200mV at 500mA
  • Quiescent Current: 60µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MIC2211-GSBML-TR has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Enable pin for power control
  • Overcurrent protection

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation
  • Compact size
  • Low power consumption
  • Wide input voltage range
  • Thermal protection

Disadvantages

  • Limited maximum output current (500mA)
  • Dropout voltage may affect performance in low input voltage scenarios

Working Principles

The MIC2211-GSBML-TR operates based on a linear regulator architecture. It regulates the output voltage by adjusting the resistance between the input and output terminals, ensuring a stable voltage level despite fluctuations in the input voltage.

Detailed Application Field Plans

The MIC2211-GSBML-TR finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to MIC2211-GSBML-TR are: - LM1117-3.3 - LT1763-3.3 - TPS73633

These models offer similar functionality and characteristics, providing options for different design requirements.

In conclusion, the MIC2211-GSBML-TR is an integrated circuit used for voltage regulation and power management in electronic devices. Its compact size, efficiency, and thermal protection make it suitable for various applications. However, designers should consider its limitations, such as maximum output current and dropout voltage, when selecting this product.

기술 솔루션에 MIC2211-GSBML-TR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MIC2211-GSBML-TR in technical solutions:

Q1: What is the MIC2211-GSBML-TR? A1: The MIC2211-GSBML-TR is a voltage regulator IC (integrated circuit) that provides a regulated output voltage from an input voltage source.

Q2: What is the input voltage range for the MIC2211-GSBML-TR? A2: The input voltage range for the MIC2211-GSBML-TR is typically between 2.7V and 5.5V.

Q3: What is the output voltage range of the MIC2211-GSBML-TR? A3: The output voltage range of the MIC2211-GSBML-TR can be adjusted from 0.8V to 3.6V using external resistors.

Q4: What is the maximum output current of the MIC2211-GSBML-TR? A4: The maximum output current of the MIC2211-GSBML-TR is 500mA.

Q5: What is the typical dropout voltage of the MIC2211-GSBML-TR? A5: The typical dropout voltage of the MIC2211-GSBML-TR is 150mV at 100mA load.

Q6: Does the MIC2211-GSBML-TR have built-in thermal shutdown protection? A6: Yes, the MIC2211-GSBML-TR has built-in thermal shutdown protection to prevent overheating.

Q7: Can the MIC2211-GSBML-TR operate in a wide temperature range? A7: Yes, the MIC2211-GSBML-TR can operate in a temperature range of -40°C to +125°C.

Q8: Is the MIC2211-GSBML-TR suitable for battery-powered applications? A8: Yes, the MIC2211-GSBML-TR is suitable for battery-powered applications due to its low quiescent current and low dropout voltage.

Q9: Can the MIC2211-GSBML-TR be used in portable devices? A9: Yes, the MIC2211-GSBML-TR is commonly used in portable devices such as smartphones, tablets, and wearable devices.

Q10: Does the MIC2211-GSBML-TR require external capacitors for stability? A10: Yes, the MIC2211-GSBML-TR requires input and output capacitors for stability and proper operation. The datasheet provides guidelines for selecting the appropriate capacitor values.