Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MIC5213-2.6BC5-TR
자세히보기 데이터시트

MIC5213-2.6BC5-TR

Product Overview

Category

MIC5213-2.6BC5-TR belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation: The MIC5213-2.6BC5-TR provides a regulated output voltage.
  • Low dropout voltage: It operates with a low dropout voltage, ensuring efficient power conversion.
  • Thermal shutdown protection: The device includes thermal shutdown protection to prevent overheating.
  • Small package size: The product comes in a compact package, suitable for space-constrained applications.

Package

The MIC5213-2.6BC5-TR is available in a small SOT-23-5 package.

Essence

The essence of MIC5213-2.6BC5-TR lies in its ability to provide stable and regulated voltage output in various electronic circuits.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.3V to 16V
  • Output Voltage: 2.6V
  • Dropout Voltage: 120mV at 100mA
  • Maximum Output Current: 500mA
  • Quiescent Current: 120µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MIC5213-2.6BC5-TR has five pins arranged as follows:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. BYP (Bypass)
  5. VOUT (Output Voltage)

Functional Features

  • Voltage Regulation: The MIC5213-2.6BC5-TR maintains a constant output voltage regardless of input voltage fluctuations.
  • Low Dropout Voltage: It operates with a low dropout voltage, minimizing power dissipation.
  • Thermal Shutdown Protection: The device includes thermal shutdown protection to prevent damage due to excessive heat.
  • Enable Pin: The EN pin allows for easy on/off control of the regulator.
  • Bypass Pin: The BYP pin can be used to improve transient response and reduce output noise.

Advantages and Disadvantages

Advantages

  • Stable and regulated output voltage
  • Low dropout voltage for efficient power conversion
  • Compact package size for space-constrained applications
  • Thermal shutdown protection for enhanced reliability
  • Easy on/off control with the enable pin

Disadvantages

  • Limited maximum output current (500mA)
  • Input voltage range may not be suitable for all applications

Working Principles

The MIC5213-2.6BC5-TR is a linear voltage regulator that uses a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry to regulate the output voltage at the desired level. The device operates by dropping excess voltage across its internal pass transistor, resulting in a stable output voltage.

Detailed Application Field Plans

The MIC5213-2.6BC5-TR finds application in various electronic systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Communication equipment

Detailed and Complete Alternative Models

  1. LM1117-2.6V: A popular alternative with similar specifications and pin configuration.
  2. LT1763-2.6: Another alternative offering lower dropout voltage and higher maximum output current.
  3. ADP3339-2.6: An alternative with extended temperature range and improved transient response.

These alternatives provide similar functionality and can be considered based on specific requirements and availability.

Word count: 431 words

기술 솔루션에 MIC5213-2.6BC5-TR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MIC5213-2.6BC5-TR in technical solutions:

  1. Q: What is MIC5213-2.6BC5-TR? A: MIC5213-2.6BC5-TR is a voltage regulator IC (integrated circuit) that provides a fixed output voltage of 2.6V.

  2. Q: What are the typical applications of MIC5213-2.6BC5-TR? A: It is commonly used in various electronic devices such as portable devices, battery-powered systems, and low-power microcontrollers.

  3. Q: What is the input voltage range for MIC5213-2.6BC5-TR? A: The input voltage range for this voltage regulator is typically between 2.3V and 16V.

  4. Q: What is the maximum output current of MIC5213-2.6BC5-TR? A: The maximum output current is around 500mA, which makes it suitable for low to moderate power applications.

  5. Q: Does MIC5213-2.6BC5-TR require any external components for operation? A: Yes, it requires a few external components such as input and output capacitors for stability and filtering.

  6. Q: Can MIC5213-2.6BC5-TR handle input voltage fluctuations? A: Yes, it has built-in protection features like thermal shutdown and overcurrent protection, which help it handle input voltage fluctuations.

  7. Q: Is MIC5213-2.6BC5-TR a linear or switching regulator? A: It is a linear regulator, meaning it regulates the output voltage by dissipating excess energy as heat.

  8. Q: What is the dropout voltage of MIC5213-2.6BC5-TR? A: The dropout voltage is typically around 300mV, which means the input voltage must be at least 300mV higher than the desired output voltage.

  9. Q: Can MIC5213-2.6BC5-TR operate in a wide temperature range? A: Yes, it is designed to operate in a wide temperature range, typically from -40°C to +125°C.

  10. Q: Are there any specific precautions to consider when using MIC5213-2.6BC5-TR? A: It is important to follow the manufacturer's datasheet and application notes for proper circuit design, component selection, and thermal considerations to ensure reliable operation.

Please note that these answers are general and may vary depending on the specific requirements and conditions of your technical solution.