Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MIC5219YMM
자세히보기 데이터시트

MIC5219YMM

Product Overview

Category: Voltage Regulator
Use: Power management
Characteristics: Low dropout, low quiescent current
Package: 8-pin MSOP
Essence: Efficient voltage regulation
Packaging/Quantity: Tape & Reel (3000 units)

Specifications

  • Input Voltage Range: 2.3V to 6.0V
  • Output Voltage Range: 1.5V to 5.5V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 150mV at 100mA
  • Quiescent Current: 35µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. BYP (Bypass)
  5. VOUT (Output Voltage)
  6. NC (No Connection)
  7. NC (No Connection)
  8. NC (No Connection)

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit current limit
  • Reverse battery protection

Advantages and Disadvantages

Advantages: - Wide input voltage range - Low dropout voltage - Low quiescent current - Small package size

Disadvantages: - Limited maximum output current - Higher cost compared to some alternatives

Working Principles

The MIC5219YMM is a voltage regulator that maintains a stable output voltage even when the input voltage fluctuates. It achieves this by using a feedback loop to adjust the internal pass transistor, ensuring a consistent output.

Detailed Application Field Plans

The MIC5219YMM is suitable for various applications requiring stable voltage regulation, such as: - Battery-powered devices - Portable electronics - IoT devices - Automotive systems

Detailed and Complete Alternative Models

  1. LM1117MPX-3.3/NOPB: Similar voltage regulator with higher maximum output current.
  2. XC6206P332MR-G: Low-cost alternative with lower maximum output current.

In conclusion, the MIC5219YMM is a versatile voltage regulator with efficient performance and compact design, making it suitable for a wide range of applications in the power management field.

Word Count: 314

기술 솔루션에 MIC5219YMM 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the MIC5219YMM?

    • The MIC5219YMM is a high-performance, low-dropout (LDO) voltage regulator designed for use in various technical solutions.

  2. What is the input voltage range of the MIC5219YMM?

    • The input voltage range of the MIC5219YMM is typically 2.3V to 6.0V.

  3. What is the output voltage range of the MIC5219YMM?

    • The output voltage range of the MIC5219YMM is adjustable from 1.24V to 5.5V.

  4. What is the maximum output current of the MIC5219YMM?

    • The maximum output current of the MIC5219YMM is 500mA.

  5. What are the typical applications of the MIC5219YMM?

    • The MIC5219YMM is commonly used in battery-powered devices, portable equipment, and other applications requiring a regulated power supply.

  6. What are the key features of the MIC5219YMM?

    • The key features of the MIC5219YMM include low dropout voltage, low ground current, thermal shutdown, and current limit protection.

  7. What is the thermal resistance of the MIC5219YMM?

    • The thermal resistance of the MIC5219YMM is typically 65°C/W.

  8. Is the MIC5219YMM available in a surface-mount package?

    • Yes, the MIC5219YMM is available in a 5-pin SOT-23 package, making it suitable for surface-mount applications.

  9. Can the MIC5219YMM be used in automotive applications?

    • Yes, the MIC5219YMM is suitable for automotive applications, provided it meets the specific requirements and standards for automotive electronics.

  10. Where can I find the detailed datasheet for the MIC5219YMM?

    • The detailed datasheet for the MIC5219YMM can be found on the manufacturer's website or through authorized distributors.