이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MIC5239-3.3BS

MIC5239-3.3BS

Product Overview

Category

MIC5239-3.3BS belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 2.5V to 16V
  • Output Voltage: 3.3V
  • Maximum Output Current: 150mA
  • Low Dropout Voltage: 200mV at 100mA
  • Low Quiescent Current: 75µA
  • Thermal Shutdown Protection
  • Short Circuit Protection

Package

MIC5239-3.3BS is available in a small SOT-23 package.

Essence

The essence of MIC5239-3.3BS is its ability to provide a stable output voltage of 3.3V with low dropout voltage and quiescent current.

Packaging/Quantity

This product is typically packaged in reels or tubes, with quantities varying depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 2.5V to 16V
  • Output Voltage: 3.3V ±2%
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to +125°C
  • Package Type: SOT-23

Detailed Pin Configuration

MIC5239-3.3BS has three pins:

  1. VIN (Pin 1): Input voltage pin.
  2. GND (Pin 2): Ground reference pin.
  3. VOUT (Pin 3): Output voltage pin.

Functional Features

  • Voltage Regulation: MIC5239-3.3BS provides a regulated output voltage of 3.3V, ensuring stability in electronic circuits.
  • Low Dropout Voltage: The low dropout voltage of 200mV at 100mA allows for efficient power conversion.
  • Thermal Shutdown Protection: The device includes thermal shutdown protection to prevent damage due to excessive heat.
  • Short Circuit Protection: MIC5239-3.3BS incorporates short circuit protection, safeguarding the circuit from potential damage.

Advantages and Disadvantages

Advantages

  • Wide input voltage range allows for versatile applications.
  • Low quiescent current minimizes power consumption.
  • Small package size enables space-saving designs.
  • Thermal shutdown and short circuit protection enhance reliability.

Disadvantages

  • Limited maximum output current may restrict usage in high-power applications.
  • Output voltage is fixed at 3.3V, limiting flexibility in certain designs.

Working Principles

MIC5239-3.3BS operates based on a linear voltage regulator principle. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage of 3.3V. The device regulates the voltage by controlling the flow of current through a pass transistor, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

MIC5239-3.3BS finds applications in various electronic systems where a stable 3.3V voltage supply is required. Some common application fields include:

  1. Battery-powered devices: Portable electronics such as smartphones, tablets, and wearable devices benefit from the low dropout voltage and low quiescent current of MIC5239-3.3BS.
  2. Embedded systems: Microcontrollers, sensors, and other embedded systems often require a regulated voltage source, making this voltage regulator suitable for such applications.
  3. Communication equipment: Wireless routers, modems, and communication modules can utilize MIC5239-3.3BS to ensure a stable power supply for reliable operation.

Detailed and Complete Alternative Models

  1. LM1117-3.3: This voltage regulator offers similar specifications and functionality to MIC5239-3.3BS, with a slightly higher maximum output current of 800mA.
  2. LT1763-3.3: Another alternative with comparable characteristics, the LT1763-3.3 provides a maximum output current of 500mA and low dropout voltage.

These alternative models can be considered based on specific application requirements and availability.

In conclusion, MIC5239-3.3BS is a voltage regulator that provides stable 3.3V output voltage with low dropout voltage and quiescent current. Its small package size, thermal shutdown protection, and short circuit protection make it suitable for various electronic applications. However, its limited maximum output current and fixed output voltage may restrict usage in certain high-power or flexible designs.

기술 솔루션에 MIC5239-3.3BS 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MIC5239-3.3BS in technical solutions:

  1. Q: What is MIC5239-3.3BS? A: MIC5239-3.3BS is a voltage regulator IC (integrated circuit) that provides a stable output voltage of 3.3V.

  2. Q: What is the input voltage range for MIC5239-3.3BS? A: The input voltage range for MIC5239-3.3BS is typically between 2.5V and 16V.

  3. Q: What is the maximum output current of MIC5239-3.3BS? A: The maximum output current of MIC5239-3.3BS is 150mA.

  4. Q: Can MIC5239-3.3BS be used in battery-powered applications? A: Yes, MIC5239-3.3BS can be used in battery-powered applications as it has low quiescent current and operates efficiently with low input voltages.

  5. Q: Is MIC5239-3.3BS suitable for use in automotive electronics? A: Yes, MIC5239-3.3BS is suitable for use in automotive electronics as it can handle the wide input voltage range typically found in automotive systems.

  6. Q: Does MIC5239-3.3BS have built-in protection features? A: Yes, MIC5239-3.3BS has built-in protection features such as thermal shutdown, current limiting, and reverse polarity protection.

  7. Q: Can MIC5239-3.3BS be used in both step-up and step-down voltage applications? A: No, MIC5239-3.3BS is a linear voltage regulator and can only be used for step-down voltage applications.

  8. Q: What is the typical dropout voltage of MIC5239-3.3BS? A: The typical dropout voltage of MIC5239-3.3BS is around 300mV at 150mA output current.

  9. Q: Can MIC5239-3.3BS be used in high-temperature environments? A: Yes, MIC5239-3.3BS has a wide operating temperature range of -40°C to +125°C, making it suitable for high-temperature environments.

  10. Q: Are there any recommended external components to use with MIC5239-3.3BS? A: Yes, it is recommended to use input and output capacitors for stability and noise filtering. The datasheet provides guidelines for selecting these components based on the application requirements.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information and application-specific considerations.