이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MIC5255-2.5BD5-TR

MIC5255-2.5BD5-TR

Product Overview

Category

MIC5255-2.5BD5-TR belongs to the category of voltage regulators.

Use

This product is commonly used to regulate voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

MIC5255-2.5BD5-TR is available in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage: 2.5V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. BYP: Bypass capacitor pin

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Reverse current protection
  • Low quiescent current

Advantages and Disadvantages

Advantages

  • Small form factor
  • Wide input voltage range
  • Low power consumption
  • Stable and regulated output voltage
  • Protection features for enhanced reliability

Disadvantages

  • Limited output current capacity
  • Higher cost compared to some alternatives

Working Principles

MIC5255-2.5BD5-TR operates based on the principle of linear voltage regulation. It uses a feedback mechanism to maintain a constant output voltage regardless of variations in the input voltage or load conditions. The internal circuitry adjusts the pass transistor to regulate the output voltage within the specified range.

Detailed Application Field Plans

MIC5255-2.5BD5-TR finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Medical equipment - Industrial control systems

Detailed and Complete Alternative Models

  1. MIC5205-2.5YM5-TR

    • Similar specifications and features
    • Different package type (SOT-23-5)
  2. LT1763CS8-2.5#PBF

    • Similar specifications and features
    • Different manufacturer (Linear Technology)
  3. TPS73625DBVR

    • Similar specifications and features
    • Different package type (SOT-23-5)
    • Different manufacturer (Texas Instruments)
  4. MCP1700T-2502E/TT

    • Similar specifications and features
    • Different package type (SOT-23-3)
    • Different manufacturer (Microchip Technology)

These alternative models can be considered based on specific requirements and preferences.

Word count: 355 words

기술 솔루션에 MIC5255-2.5BD5-TR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MIC5255-2.5BD5-TR in technical solutions:

  1. Q: What is the MIC5255-2.5BD5-TR? A: The MIC5255-2.5BD5-TR is a low-dropout (LDO) voltage regulator IC.

  2. Q: What is the input voltage range for the MIC5255-2.5BD5-TR? A: The input voltage range is typically between 2.3V and 16V.

  3. Q: What is the output voltage of the MIC5255-2.5BD5-TR? A: The output voltage is fixed at 2.5V.

  4. Q: What is the maximum output current of the MIC5255-2.5BD5-TR? A: The maximum output current is 150mA.

  5. Q: What is the dropout voltage of the MIC5255-2.5BD5-TR? A: The dropout voltage is typically 200mV at 150mA load.

  6. Q: Is the MIC5255-2.5BD5-TR suitable for battery-powered applications? A: Yes, the low dropout voltage and low quiescent current make it suitable for battery-powered applications.

  7. Q: Does the MIC5255-2.5BD5-TR have built-in thermal shutdown protection? A: Yes, it has built-in thermal shutdown protection to prevent overheating.

  8. Q: Can the MIC5255-2.5BD5-TR be used in automotive applications? A: Yes, it is designed to meet automotive requirements and can be used in automotive applications.

  9. Q: What is the operating temperature range of the MIC5255-2.5BD5-TR? A: The operating temperature range is typically between -40°C and +125°C.

  10. Q: Does the MIC5255-2.5BD5-TR require any external components for operation? A: Yes, it requires input and output capacitors for stability and proper operation.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.