이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MIC5305-4.6YML-TR

MIC5305-4.6YML-TR

Product Overview

Category

MIC5305-4.6YML-TR belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage: 4.6V
  • Maximum Output Current: 150mA
  • Low Dropout Voltage: 200mV at 100mA
  • Low Quiescent Current: 45µA
  • Shutdown Current: <1µA
  • Thermal Shutdown Protection
  • Short Circuit Protection
  • Small Package Size: SOT-23-5

Package

MIC5305-4.6YML-TR is packaged in a SOT-23-5 package.

Essence

The essence of MIC5305-4.6YML-TR is to provide a stable and regulated output voltage for various electronic devices.

Packaging/Quantity

This product is typically available in reels containing a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage: 4.6V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 45µA
  • Shutdown Current: <1µA
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOT-23-5

Detailed Pin Configuration

MIC5305-4.6YML-TR has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. BYP (Bypass Capacitor)
  5. VOUT (Output Voltage)

Functional Features

  • Wide input voltage range allows for flexibility in various applications.
  • Low dropout voltage ensures efficient power conversion.
  • Low quiescent current minimizes power consumption during standby or idle modes.
  • Thermal shutdown protection prevents the device from overheating.
  • Short circuit protection safeguards against potential damage.

Advantages and Disadvantages

Advantages

  • Wide input voltage range provides versatility.
  • Low dropout voltage ensures efficient power conversion.
  • Small package size allows for space-saving designs.
  • Thermal shutdown and short circuit protection enhance reliability.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Output voltage is fixed at 4.6V, limiting flexibility in certain scenarios.

Working Principles

MIC5305-4.6YML-TR operates as a linear voltage regulator. It takes an input voltage within the specified range and regulates it to a stable output voltage of 4.6V. The device uses internal circuitry to maintain the desired output voltage even when the input voltage fluctuates. It achieves this by adjusting the resistance within the regulator to compensate for changes in load and input conditions.

Detailed Application Field Plans

MIC5305-4.6YML-TR finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics - Industrial equipment

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to MIC5305-4.6YML-TR are: - LM1117-4.6 - MCP1700-4.6 - TPS73601DRBR

These models offer similar functionality and characteristics, providing options for different design requirements.

In conclusion, MIC5305-4.6YML-TR is a voltage regulator that offers stable and regulated output voltage for various electronic applications. Its wide input voltage range, low dropout voltage, and small package size make it suitable for a range of devices. However, its limited maximum output current and fixed output voltage should be considered when selecting an appropriate regulator for specific applications.

기술 솔루션에 MIC5305-4.6YML-TR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MIC5305-4.6YML-TR in technical solutions:

  1. Q: What is the MIC5305-4.6YML-TR? A: The MIC5305-4.6YML-TR is a voltage regulator IC (integrated circuit) that provides a fixed output voltage of 4.6V.

  2. Q: What are the typical applications of MIC5305-4.6YML-TR? A: The MIC5305-4.6YML-TR is commonly used in various technical solutions such as battery-powered devices, portable electronics, IoT (Internet of Things) devices, and low-power microcontroller systems.

  3. Q: What is the input voltage range for MIC5305-4.6YML-TR? A: The input voltage range for MIC5305-4.6YML-TR is typically between 2.7V and 5.5V.

  4. Q: What is the maximum output current of MIC5305-4.6YML-TR? A: The maximum output current of MIC5305-4.6YML-TR is typically 150mA.

  5. Q: Does MIC5305-4.6YML-TR have built-in thermal shutdown protection? A: Yes, MIC5305-4.6YML-TR includes built-in thermal shutdown protection to prevent overheating.

  6. Q: Can I use MIC5305-4.6YML-TR in automotive applications? A: No, MIC5305-4.6YML-TR is not specifically designed for automotive applications and may not meet the required specifications for such environments.

  7. Q: Is MIC5305-4.6YML-TR a low-dropout regulator (LDO)? A: Yes, MIC5305-4.6YML-TR is an LDO regulator, which means it can maintain a stable output voltage even when the input voltage is close to the desired output voltage.

  8. Q: What is the typical dropout voltage of MIC5305-4.6YML-TR? A: The typical dropout voltage of MIC5305-4.6YML-TR is around 200mV at full load.

  9. Q: Does MIC5305-4.6YML-TR have short-circuit protection? A: Yes, MIC5305-4.6YML-TR includes short-circuit protection to prevent damage in case of a short circuit on the output.

  10. Q: Can I use MIC5305-4.6YML-TR in battery charging applications? A: No, MIC5305-4.6YML-TR is not designed for battery charging applications and may not provide the necessary features for proper battery charging.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements. It's always recommended to refer to the official datasheet and consult with technical experts for accurate information.