이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MIC5317-1.2YMT-TZ

MIC5317-1.2YMT-TZ

Introduction

The MIC5317-1.2YMT-TZ belongs to the category of voltage regulators and is widely used in electronic devices to provide a stable output voltage. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the MIC5317-1.2YMT-TZ.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Provides stable output voltage in electronic devices
  • Characteristics: High efficiency, low dropout voltage, small package size
  • Package: Essence: Thin MLF (2x2mm), Packaging/Quantity: Tape & Reel (3000 units)

Specifications

  • Output Voltage: 1.2V
  • Input Voltage Range: 2.7V to 5.5V
  • Output Current: Up to 500mA
  • Quiescent Current: 35µA
  • Dropout Voltage: 150mV at 300mA load
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MIC5317-1.2YMT-TZ has a 6-pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. EN (Enable) 4. BYP (Bypass) 5. FB (Feedback) 6. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage for extended battery life
  • High PSRR (Power Supply Rejection Ratio) for noise-sensitive applications
  • Thermal shutdown and current limit protection
  • Small package size for space-constrained designs

Advantages and Disadvantages

Advantages

  • High efficiency
  • Wide input voltage range
  • Small package size
  • Low dropout voltage

Disadvantages

  • Limited output current compared to some alternatives
  • Higher quiescent current than certain competitors

Working Principles

The MIC5317-1.2YMT-TZ utilizes a feedback mechanism to maintain a stable output voltage regardless of variations in the input voltage or load conditions. It employs a low dropout architecture to minimize power dissipation and maximize efficiency.

Detailed Application Field Plans

The MIC5317-1.2YMT-TZ is suitable for various portable and battery-powered applications, including: - Mobile phones - Portable media players - Digital cameras - Handheld gaming devices

Detailed and Complete Alternative Models

Some alternative models to the MIC5317-1.2YMT-TZ include: - MIC5330: Higher output current but larger package size - MIC24045: Lower quiescent current but narrower input voltage range - MIC2940A: Lower dropout voltage but higher package profile

In conclusion, the MIC5317-1.2YMT-TZ is a versatile voltage regulator with high efficiency and a compact form factor, making it suitable for a wide range of portable electronic devices.

[Word Count: 442]

기술 솔루션에 MIC5317-1.2YMT-TZ 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the input voltage range for MIC5317-1.2YMT-TZ?

    • The input voltage range for MIC5317-1.2YMT-TZ is typically 2.3V to 5.5V.
  2. What is the output voltage of MIC5317-1.2YMT-TZ?

    • The output voltage of MIC5317-1.2YMT-TZ is fixed at 1.2V.
  3. What is the maximum output current of MIC5317-1.2YMT-TZ?

    • The maximum output current of MIC5317-1.2YMT-TZ is 500mA.
  4. What are the typical applications for MIC5317-1.2YMT-TZ?

    • Typical applications include powering microcontrollers, FPGAs, and other digital ICs in portable devices, battery-powered equipment, and distributed power systems.
  5. Does MIC5317-1.2YMT-TZ require external components for operation?

    • MIC5317-1.2YMT-TZ requires only a small output capacitor for stability and can operate with no external feedback components.
  6. What is the efficiency of MIC5317-1.2YMT-TZ?

    • The efficiency of MIC5317-1.2YMT-TZ can exceed 90% under typical load conditions.
  7. Is MIC5317-1.2YMT-TZ suitable for automotive applications?

    • Yes, MIC5317-1.2YMT-TZ is AEC-Q100 qualified and suitable for automotive applications.
  8. What protection features does MIC5317-1.2YMT-TZ offer?

    • MIC5317-1.2YMT-TZ includes overcurrent protection, thermal shutdown, and undervoltage lockout for robust system protection.
  9. Can MIC5317-1.2YMT-TZ be used in noise-sensitive applications?

    • Yes, MIC5317-1.2YMT-TZ has low output voltage ripple and excellent load/line transient response, making it suitable for noise-sensitive applications.
  10. What package options are available for MIC5317-1.2YMT-TZ?

    • MIC5317-1.2YMT-TZ is available in a compact 6-pin Thin MLF® (1.5mm x 1.5mm) package for space-constrained designs.