Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MIC5319-3.0BD5-TR
자세히보기 데이터시트

MIC5319-3.0BD5-TR

Product Overview

Category

MIC5319-3.0BD5-TR belongs to the category of voltage regulators.

Use

This product is used to regulate and stabilize voltage levels in electronic circuits.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent and thermal protection
  • Small package size

Package

MIC5319-3.0BD5-TR is available in a small package, which makes it suitable for space-constrained applications.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output, ensuring reliable operation of electronic devices.

Packaging/Quantity

MIC5319-3.0BD5-TR is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage: 3.0V
  • Dropout Voltage: 150mV (typical)
  • Maximum Output Current: 500mA
  • Quiescent Current: 45µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

MIC5319-3.0BD5-TR has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. BYP (Bypass)
  5. VOUT (Output Voltage)

Functional Features

  • High Efficiency: The MIC5319-3.0BD5-TR offers high efficiency, minimizing power loss during voltage regulation.
  • Low Dropout Voltage: With a low dropout voltage, this regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
  • Overcurrent and Thermal Protection: The device incorporates overcurrent and thermal protection mechanisms to safeguard against potential damage.
  • Wide Input Voltage Range: The wide input voltage range allows for flexibility in various applications.
  • Small Package Size: The compact package size makes it suitable for space-constrained designs.

Advantages and Disadvantages

Advantages

  • High efficiency operation
  • Reliable voltage regulation
  • Overcurrent and thermal protection
  • Wide input voltage range
  • Compact package size

Disadvantages

  • Limited maximum output current (500mA)

Working Principles

MIC5319-3.0BD5-TR operates based on the principle of a linear voltage regulator. It takes an input voltage within the specified range and regulates it to a stable 3.0V output. The device uses internal circuitry to maintain the desired output voltage, compensating for variations in the input voltage and load conditions.

Detailed Application Field Plans

MIC5319-3.0BD5-TR finds applications in various electronic devices and systems, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MIC5319-3.0BD5-TR include: - LM1117-3.3 - LT1763-3.3 - TPS73633

These alternatives can be considered based on specific requirements and design constraints.

Word count: 346 words

기술 솔루션에 MIC5319-3.0BD5-TR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MIC5319-3.0BD5-TR in technical solutions:

  1. Q: What is the MIC5319-3.0BD5-TR? A: The MIC5319-3.0BD5-TR is a voltage regulator IC (integrated circuit) that provides a fixed output voltage of 3.0V.

  2. Q: What is the input voltage range for the MIC5319-3.0BD5-TR? A: The input voltage range for the MIC5319-3.0BD5-TR is typically between 2.7V and 5.5V.

  3. Q: What is the maximum output current of the MIC5319-3.0BD5-TR? A: The maximum output current of the MIC5319-3.0BD5-TR is 500mA.

  4. Q: Can the MIC5319-3.0BD5-TR be used in battery-powered applications? A: Yes, the MIC5319-3.0BD5-TR can be used in battery-powered applications as it has a wide input voltage range and low quiescent current.

  5. Q: Does the MIC5319-3.0BD5-TR require any external components for operation? A: Yes, the MIC5319-3.0BD5-TR requires a few external components such as input and output capacitors for stability and filtering.

  6. Q: Is the MIC5319-3.0BD5-TR suitable for low-power applications? A: Yes, the MIC5319-3.0BD5-TR is suitable for low-power applications due to its low quiescent current and high efficiency.

  7. Q: Can the MIC5319-3.0BD5-TR handle input voltage fluctuations? A: Yes, the MIC5319-3.0BD5-TR has built-in protection features such as overvoltage and thermal shutdown to handle input voltage fluctuations.

  8. Q: What is the operating temperature range of the MIC5319-3.0BD5-TR? A: The operating temperature range of the MIC5319-3.0BD5-TR is typically between -40°C and 125°C.

  9. Q: Can the MIC5319-3.0BD5-TR be used in automotive applications? A: Yes, the MIC5319-3.0BD5-TR is suitable for automotive applications as it meets the necessary requirements such as AEC-Q100 Grade 1 qualification.

  10. Q: Are there any evaluation boards or reference designs available for the MIC5319-3.0BD5-TR? A: Yes, Microchip provides evaluation boards and reference designs for the MIC5319-3.0BD5-TR to help with its implementation in various applications.

Please note that these answers are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.