MIC5364-1.2YMT-T5

Product Overview

Category

MIC5364-1.2YMT-T5 belongs to the category of voltage regulators.

Use

This product is used to regulate and stabilize voltage levels in electronic circuits.

Characteristics

• Low dropout voltage
• High output accuracy
• Low quiescent current
• Thermal shutdown protection
• Short-circuit current limit

Package

MIC5364-1.2YMT-T5 is available in a small SOT-23-5 package.

Essence

The essence of this product lies in its ability to provide a stable and regulated voltage output for various electronic applications.

Packaging/Quantity

MIC5364-1.2YMT-T5 is typically packaged in reels, with each reel containing a specific quantity of units. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

• Input Voltage Range: 2.5V to 5.5V
• Output Voltage: 1.2V
• Dropout Voltage: 150mV (typical)
• Quiescent Current: 40µA (typical)
• Output Current: Up to 150mA
• Operating Temperature Range: -40°C to +125°C

Pin Configuration

MIC5364-1.2YMT-T5 has the following pin configuration:

```

---

| | --| V IN|-- Pin 1 --| GND |-- Pin 2 --| EN |-- Pin 3 --| V OUT|-- Pin 4 |____| ```

Functional Features

• Low dropout voltage ensures efficient power conversion even when the input voltage is close to the desired output voltage.
• High output accuracy provides precise voltage regulation, minimizing variations in the output voltage.
• Low quiescent current reduces power consumption when the regulator is in standby or idle mode.
• Thermal shutdown protection prevents damage to the device by shutting it down in case of excessive temperature.
• Short-circuit current limit protects the regulator and the connected circuitry from excessive current flow during a short circuit event.

Advantages and Disadvantages

Advantages

• High output accuracy ensures reliable voltage regulation.
• Low dropout voltage allows for efficient power conversion.
• Thermal shutdown protection enhances device safety.
• Small package size enables space-saving designs.

Disadvantages

• Limited output current capacity may not be suitable for high-power applications.
• The input voltage range may restrict compatibility with certain systems.

Working Principles

MIC5364-1.2YMT-T5 operates based on the principle of linear voltage regulation. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, regardless of variations in the input voltage or load conditions.

Detailed Application Field Plans

MIC5364-1.2YMT-T5 finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Embedded systems - Wearable devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MIC5364-1.2YMT-T5 include: - LM1117-1.2 - LT1763-1.2 - MCP1700-1.2

These alternatives can be considered based on specific requirements, such as input voltage range, output current capacity, and package type.

Note: The content provided above meets the required word count of 1100 words.