PIC16C65B-04I/PT

Product Overview

Category

The PIC16C65B-04I/PT belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

• Low power consumption
• High-performance RISC architecture
• Wide operating voltage range
• On-chip program memory
• Multiple I/O ports
• Enhanced peripheral features

Package

The PIC16C65B-04I/PT is available in a small form factor package, which makes it suitable for space-constrained applications.

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities in a compact package.

Packaging/Quantity

The PIC16C65B-04I/PT is typically packaged in tape and reel format, with a quantity of 250 units per reel.

Specifications

• Operating Voltage: 2.0V to 5.5V
• Maximum Clock Frequency: 20 MHz
• Program Memory Size: 8 KB
• RAM Size: 368 bytes
• Number of I/O Pins: 22
• ADC Channels: 8
• Timers: 3
• Communication Interfaces: USART, SPI, I2C

Detailed Pin Configuration

The PIC16C65B-04I/PT has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

1. VDD - Power supply voltage
2. RA0 - General-purpose I/O pin
3. RA1 - General-purpose I/O pin
4. RA2 - General-purpose I/O pin
5. RA3 - General-purpose I/O pin
6. RA4 - General-purpose I/O pin
7. MCLR/VPP - Master Clear input/Voltage Programming input
8. VSS - Ground
9. RB0/INT - General-purpose I/O pin/External Interrupt input
10. RB1 - General-purpose I/O pin
11. RB2 - General-purpose I/O pin
12. RB3 - General-purpose I/O pin
13. RB4 - General-purpose I/O pin
14. RB5 - General-purpose I/O pin
15. RB6 - General-purpose I/O pin
16. RB7 - General-purpose I/O pin
17. OSC1/CLKIN - Oscillator input/Clock input
18. OSC2/CLKOUT - Oscillator output/Clock output
19. RC0/T1OSO/T1CKI - General-purpose I/O pin/Timer1 oscillator output/Timer1 clock input
20. RC1/T1OSI/CCP2 - General-purpose I/O pin/Timer1 oscillator input/CCP2 module
21. RC2/CCP1 - General-purpose I/O pin/CCP1 module
22. RC3/SCK/SCL - General-purpose I/O pin/SPI/I2C clock input
23. RC4/SDI/SDA - General-purpose I/O pin/SPI/I2C data input
24. RC5/SDO - General-purpose I/O pin/SPI data output
25. RC6/TX/CK - General-purpose I/O pin/USART transmit/USART synchronous clock
26. RC7/RX/DT - General-purpose I/O pin/USART receive/USART asynchronous data
27. VDD - Power supply voltage
28. VSS - Ground

Functional Features

The PIC16C65B-04I/PT offers several functional features that enhance its usability and performance:

1. High-performance RISC architecture allows for efficient execution of instructions.
2. On-chip program memory enables easy and flexible programming of the microcontroller.
3. Multiple I/O ports provide connectivity to external devices and peripherals.
4. Enhanced peripheral features, such as timers, ADC channels, and communication interfaces, expand the capabilities of the microcontroller.

Advantages and Disadvantages

Advantages

• Low power consumption makes it suitable for battery-powered applications.
• Wide operating voltage range allows for compatibility with various power sources.
• Compact package size enables integration into space-constrained designs.
• High-performance RISC architecture ensures efficient execution of instructions.

Disadvantages

• Limited program memory size may restrict the complexity of applications.
• Relatively small RAM size may limit the amount of data that can be stored.
• Lack of advanced features compared to more modern microcontrollers.

Working Principles

The PIC16C65B-04I/PT operates based on the principles of a RISC (Reduced Instruction Set Computer) architecture. It executes instructions stored in its program memory, interacts with external devices through its I/O ports, and utilizes its peripheral features to perform various tasks. The microcontroller follows a sequential execution model, where each instruction