이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
PIC16C774-I/PQ

PIC16C774-I/PQ

Product Overview

Category

The PIC16C774-I/PQ belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and managing their operations.

Characteristics

  • High-performance 8-bit RISC architecture
  • Low power consumption
  • Wide operating voltage range
  • Large program memory capacity
  • Multiple communication interfaces
  • Rich set of peripherals

Package

The PIC16C774-I/PQ is available in a PQFP package (Plastic Quad Flat Pack).

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and management capabilities for electronic devices and embedded systems.

Packaging/Quantity

The PIC16C774-I/PQ is typically packaged in reels, with each reel containing a specific quantity of microcontrollers. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Architecture: 8-bit RISC
  • Program Memory Size: 14 KB
  • RAM Size: 368 bytes
  • Operating Voltage Range: 2.0V to 5.5V
  • Number of I/O Pins: 35
  • Communication Interfaces: UART, SPI, I2C
  • Timers/Counters: 3
  • Analog-to-Digital Converter (ADC): 10-bit, 8 channels
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC16C774-I/PQ has a total of 35 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. MCLR/VPP - Master Clear input/Voltage Programming input
  9. RB0/INT - General-purpose I/O pin/External Interrupt input
  10. RB1 - General-purpose I/O pin
  11. RB2 - General-purpose I/O pin
  12. RB3 - General-purpose I/O pin
  13. RB4 - General-purpose I/O pin
  14. RB5 - General-purpose I/O pin
  15. RB6 - General-purpose I/O pin
  16. RB7 - General-purpose I/O pin
  17. VSS - Ground
  18. OSC1/CLKIN - Oscillator input/Clock input
  19. OSC2/CLKOUT - Oscillator output/Clock output
  20. RC0 - General-purpose I/O pin
  21. RC1 - General-purpose I/O pin
  22. RC2 - General-purpose I/O pin
  23. RC3 - General-purpose I/O pin
  24. RC4 - General-purpose I/O pin
  25. RC5 - General-purpose I/O pin
  26. RC6/TX/CK - General-purpose I/O pin/Transmit data pin/Clock pin
  27. RC7/RX/DT - General-purpose I/O pin/Receive data pin/Data pin
  28. VDD - Power supply voltage
  29. VSS - Ground
  30. RD0 - General-purpose I/O pin
  31. RD1 - General-purpose I/O pin
  32. RD2 - General-purpose I/O pin
  33. RD3 - General-purpose I/O pin
  34. RD4 - General-purpose I/O pin
  35. RD5 - General-purpose I/O pin

Functional Features

The PIC16C774-I/PQ offers a range of functional features that enhance its performance and versatility. Some of the key features include:

  • High-speed processing capabilities
  • On-chip program memory for storing instructions
  • Data memory for temporary storage during program execution
  • Built-in communication interfaces for seamless data transfer
  • Timers and counters for precise timing operations
  • Analog-to-Digital Converter (ADC) for converting analog signals to digital values
  • Interrupt handling mechanism for responding to external events
  • Power-saving modes for efficient energy consumption

Advantages and Disadvantages

Advantages

  • High-performance 8-bit RISC architecture ensures efficient processing.
  • Low power consumption extends battery life in portable devices.
  • Wide operating voltage range allows compatibility with various power sources.
  • Large program memory capacity accommodates complex applications.
  • Multiple communication interfaces enable seamless integration with other devices.
  • Rich set of peripherals enhances functionality and flexibility.

Disadvantages

  • Limited program memory size may restrict the complexity of applications.
  • Relatively small RAM size may limit the amount of data that can be stored temporarily.
  • Lack of advanced features found in more modern microcontrollers.

Working Principles

The PIC16C774-I/PQ operates

기술 솔루션에 PIC16C774-I/PQ 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the operating voltage range of PIC16C774-I/PQ?
    - The operating voltage range of PIC16C774-I/PQ is 2.0V to 5.5V.

  2. What are the key features of PIC16C774-I/PQ?
    - The key features of PIC16C774-I/PQ include 14-bit core, 8K words Flash program memory, and 368 bytes data memory.

  3. Can PIC16C774-I/PQ be used in automotive applications?
    - Yes, PIC16C774-I/PQ is suitable for automotive applications.

  4. What communication interfaces does PIC16C774-I/PQ support?
    - PIC16C774-I/PQ supports USART, SPI, and I2C communication interfaces.

  5. Is PIC16C774-I/PQ compatible with MPLAB® X IDE?
    - Yes, PIC16C774-I/PQ is compatible with MPLAB® X IDE.

  6. What is the maximum frequency at which PIC16C774-I/PQ can operate?
    - PIC16C774-I/PQ can operate at a maximum frequency of 32 MHz.

  7. Does PIC16C774-I/PQ have built-in analog-to-digital converters (ADC)?
    - Yes, PIC16C774-I/PQ has a 10-bit ADC with up to 13 channels.

  8. Can PIC16C774-I/PQ be used in battery-powered applications?
    - Yes, PIC16C774-I/PQ is suitable for battery-powered applications due to its low power consumption.

  9. What development tools are available for programming PIC16C774-I/PQ?
    - Development tools such as PICkit™ 3 and MPLAB® ICD 4 can be used for programming PIC16C774-I/PQ.

  10. Are there any application notes or reference designs available for PIC16C774-I/PQ?
    - Yes, Microchip provides application notes and reference designs for PIC16C774-I/PQ to assist in its implementation in technical solutions.