Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
PIC16CE624-04/SS
자세히보기 데이터시트

PIC16CE624-04/SS

Product Overview

Category

The PIC16CE624-04/SS belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • Low power consumption
  • High-performance RISC CPU
  • Wide operating voltage range
  • On-chip peripherals for enhanced functionality
  • Flash memory for program storage
  • EEPROM for data storage
  • Timers, counters, and PWM modules for precise timing control
  • Analog-to-digital converters (ADC) for analog signal processing

Package

The PIC16CE624-04/SS is available in a SSOP package, which stands for Shrink Small Outline Package. This package offers a compact size and surface-mount compatibility, making it suitable for space-constrained designs.

Essence

The essence of the PIC16CE624-04/SS lies in its ability to provide a cost-effective solution for embedded control applications. It combines a powerful CPU with integrated peripherals, allowing for efficient and flexible system design.

Packaging/Quantity

The PIC16CE624-04/SS is typically sold in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Operating Voltage: 2.0V to 5.5V
  • CPU Speed: Up to 4 MHz
  • Program Memory Size: 3.5 KB
  • Data Memory Size: 128 bytes
  • I/O Pins: 14
  • ADC Resolution: 10-bit
  • Timers: 1 x 8-bit, 1 x 16-bit
  • Communication Interfaces: UART, SPI, I2C

Detailed Pin Configuration

The PIC16CE624-04/SS has a total of 14 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0/AN0 - Analog input or digital I/O
  3. RA1/AN1 - Analog input or digital I/O
  4. RA2/AN2 - Analog input or digital I/O
  5. RA3/AN3 - Analog input or digital I/O
  6. RA4/T0CKI/C1OUT - Timer input or digital I/O
  7. MCLR/VPP - Master Clear input or programming voltage
  8. RC0/T1OSO/T1CKI - Timer output or digital I/O
  9. RC1/T1OSI/CCP2 - Timer input or digital I/O
  10. RC2/CCP1 - Capture/Compare/PWM module or digital I/O
  11. RC3/SCL/SDA - I2C communication or digital I/O
  12. RC4/SDI/SDA - SPI data input or I2C communication or digital I/O
  13. RC5/SDO - SPI data output or digital I/O
  14. VSS - Ground

Functional Features

The PIC16CE624-04/SS offers several functional features that enhance its usability and versatility in various applications:

  1. High-performance RISC CPU: The microcontroller is equipped with a powerful CPU that executes instructions quickly, enabling efficient processing of complex tasks.
  2. On-chip peripherals: Integrated peripherals such as timers, PWM modules, and ADCs provide additional functionality without the need for external components, reducing system complexity and cost.
  3. Flash memory: The microcontroller's flash memory allows for easy reprogramming, facilitating firmware updates and customization.
  4. Low power consumption: The device is designed to operate at low power levels, making it suitable for battery-powered applications.
  5. Wide operating voltage range: The PIC16CE624-04/SS can operate within a wide voltage range, providing flexibility in different power supply scenarios.

Advantages and Disadvantages

Advantages

  • Cost-effective solution for embedded control applications
  • Compact size and surface-mount compatibility
  • Integrated peripherals reduce external component count
  • Easy reprogramming with flash memory
  • Low power consumption for battery-powered applications

Disadvantages

  • Limited program and data memory compared to higher-end microcontrollers
  • Relatively lower CPU speed compared to advanced microcontrollers
  • Limited number of I/O pins may restrict the complexity of designs

Working Principles

The PIC16CE624-04/SS operates based on the principles of a RISC (Reduced Instruction Set Computer) architecture. It executes instructions stored in its program memory, manipulating data from its data memory and interacting with external devices through its I/O pins and integrated peripherals. The microcontroller follows a sequential execution model, where each instruction is fetched, decoded, and executed in a step-by-step manner.

Detailed Application Field Plans

The PIC16CE624-04/SS finds application in various fields that require embedded control capabilities. Some of the potential application

기술 솔루션에 PIC16CE624-04/SS 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the operating voltage range of PIC16CE624-04/SS?
    - The operating voltage range of PIC16CE624-04/SS is 2.0V to 5.5V.

  2. What is the maximum frequency at which PIC16CE624-04/SS can operate?
    - PIC16CE624-04/SS can operate at a maximum frequency of 4 MHz.

  3. Can PIC16CE624-04/SS be used in battery-powered applications?
    - Yes, PIC16CE624-04/SS's low operating voltage range makes it suitable for battery-powered applications.

  4. What are the typical applications of PIC16CE624-04/SS?
    - Typical applications of PIC16CE624-04/SS include sensor interfaces, battery chargers, and small appliances.

  5. Does PIC16CE624-04/SS have built-in analog-to-digital conversion (ADC) capability?
    - No, PIC16CE624-04/SS does not have built-in ADC capability.

  6. What communication interfaces are supported by PIC16CE624-04/SS?
    - PIC16CE624-04/SS supports serial communication interfaces such as SPI and I2C.

  7. Is PIC16CE624-04/SS suitable for temperature sensing applications?
    - Yes, PIC16CE624-04/SS can be used in temperature sensing applications with external temperature sensors.

  8. Can PIC16CE624-04/SS be programmed in-circuit?
    - Yes, PIC16CE624-04/SS supports in-circuit programming.

  9. What are the available package options for PIC16CE624-04/SS?
    - PIC16CE624-04/SS is available in a 20-pin SSOP package.

  10. Is PIC16CE624-04/SS RoHS compliant?
    - Yes, PIC16CE624-04/SS is RoHS compliant.