PIC16F1519-I/MV
Product Overview
Category
The PIC16F1519-I/MV belongs to the category of microcontrollers.
Use
This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.
Characteristics
- High-performance 8-bit RISC architecture
- Flash program memory with self-read/write capability
- Enhanced mid-range core with 49 instructions
- Wide operating voltage range: 1.8V to 5.5V
- Low power consumption
- Multiple communication interfaces (UART, SPI, I2C)
- Analog-to-Digital Converter (ADC) for sensor interfacing
- Timers and PWM modules for precise timing control
- Integrated EEPROM for non-volatile data storage
Package
The PIC16F1519-I/MV is available in a compact and durable package, suitable for surface mount technology (SMT). The package type is known as QFN (Quad Flat No-Lead), which ensures easy integration into circuit boards.
Essence
The essence of the PIC16F1519-I/MV lies in its ability to provide efficient and reliable control and processing capabilities within a small form factor. It combines a powerful core with various peripherals, making it an ideal choice for a wide range of applications.
Packaging/Quantity
The PIC16F1519-I/MV is typically packaged in reels or tubes, depending on the manufacturer's specifications. The quantity per reel/tube may vary, but a common quantity is 250 units.
Specifications
- Microcontroller Family: PIC16F
- Core Size: 8-bit
- Program Memory Size: 14KB
- RAM Size: 1.75KB
- Number of I/O Pins: 28
- Operating Voltage Range: 1.8V to 5.5V
- Maximum Clock Speed: 32MHz
- ADC Resolution: 10-bit
- Communication Interfaces: UART, SPI, I2C
- Timers: 3 x 8-bit, 1 x 16-bit
- PWM Modules: 2
- EEPROM Size: 256 bytes
Detailed Pin Configuration
The PIC16F1519-I/MV has a total of 28 pins. The pin configuration is as follows:
Pin 1: VDD - Power Supply
Pin 2: RA0/AN0 - Analog Input/Output or Digital I/O
Pin 3: RA1/AN1 - Analog Input/Output or Digital I/O
...
Pin 27: RC5/TX/CK - UART Transmit/Serial Clock or Digital I/O
Pin 28: RC4/RX/DT - UART Receive/Data Terminal or Digital I/O
Functional Features
1. High-Performance Core
The PIC16F1519-I/MV features a high-performance 8-bit RISC core, which enables efficient execution of instructions and fast processing of data.
2. Flash Program Memory
With its self-read/write capability, the microcontroller allows for easy and convenient programming of the flash memory, enabling firmware updates and customization.
3. Enhanced Mid-Range Core
The enhanced mid-range core provides 49 instructions, including arithmetic, logic, and control operations, allowing for versatile programming options.
4. Wide Operating Voltage Range
The microcontroller can operate within a wide voltage range of 1.8V to 5.5V, making it suitable for various power supply configurations.
5. Low Power Consumption
Designed with power efficiency in mind, the PIC16F1519-I/MV minimizes power consumption, making it suitable for battery-powered applications or energy-conscious designs.
6. Communication Interfaces
The microcontroller supports multiple communication interfaces, including UART, SPI, and I2C, enabling seamless integration with other devices and systems.
7. Analog-to-Digital Converter (ADC)
Equipped with a 10-bit ADC, the microcontroller can accurately convert analog signals into digital values, making it suitable for sensor interfacing and data acquisition applications.
8. Timers and PWM Modules
The integrated timers and PWM modules provide precise timing control and enable the generation of PWM signals, facilitating tasks such as motor control and signal modulation.
9. Integrated EEPROM
The microcontroller includes an integrated EEPROM (Electrically Erasable Programmable Read-Only Memory) for non-volatile data storage, allowing for the retention of critical information even when power is lost.
Advantages and Disadvantages
Advantages
- High-performance core for efficient processing
- Wide operating voltage range for flexibility in power supply configurations
- Low power consumption for energy-efficient designs
- Multiple communication interfaces for seamless integration
- Integrated EEPROM for non-volatile data storage
Disadvantages
- Limited program memory size (14KB) compared
기술 솔루션에 PIC16F1519-I/MV 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is the maximum operating frequency of PIC16F1519-I/MV?
- The maximum operating frequency of PIC16F1519-I/MV is 32 MHz.Can PIC16F1519-I/MV be used for motor control applications?
- Yes, PIC16F1519-I/MV can be used for motor control applications with its integrated peripherals and PWM capabilities.Does PIC16F1519-I/MV support communication protocols like I2C and SPI?
- Yes, PIC16F1519-I/MV supports communication protocols such as I2C and SPI.What are the available memory options for program storage in PIC16F1519-I/MV?
- PIC16F1519-I/MV offers flash program memory options ranging from 14 KB to 28 KB.Can PIC16F1519-I/MV operate at low power?
- Yes, PIC16F1519-I/MV features low-power modes and can operate at low power for energy-efficient applications.Is PIC16F1519-I/MV suitable for battery-powered devices?
- Yes, PIC16F1519-I/MV is suitable for battery-powered devices due to its low-power capabilities.What development tools are available for programming PIC16F1519-I/MV?
- Development tools such as MPLAB X IDE and MPLAB Code Configurator support programming and configuration of PIC16F1519-I/MV.Can PIC16F1519-I/MV be used in automotive applications?
- Yes, PIC16F1519-I/MV is suitable for automotive applications with its robust design and temperature range.Are there any application notes or reference designs available for PIC16F1519-I/MV?
- Yes, Microchip provides application notes and reference designs for implementing PIC16F1519-I/MV in various technical solutions.What are the key features that differentiate PIC16F1519-I/MV from other microcontrollers?
- Some key features of PIC16F1519-I/MV include its enhanced core architecture, multiple communication peripherals, and integrated analog-to-digital converters (ADCs).