Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
PIC16F1934-E/MV
자세히보기 데이터시트

PIC16F1934-E/MV

Product Overview

Category

The PIC16F1934-E/MV belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • Low power consumption
  • High performance
  • Enhanced peripheral integration
  • Wide operating voltage range
  • Small form factor

Package

The PIC16F1934-E/MV is available in a compact package, making it suitable for space-constrained applications.

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities in a small and low-power package.

Packaging/Quantity

The PIC16F1934-E/MV is typically packaged in reels or tubes, with varying quantities depending on the manufacturer's specifications.

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 32 MHz
  • Program Memory Size: 28 KB
  • RAM Size: 1.75 KB
  • Number of I/O Pins: 25
  • ADC Channels: 11
  • Timers: 3
  • Communication Interfaces: UART, SPI, I2C

Detailed Pin Configuration

The PIC16F1934-E/MV features a total of 25 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. MCLR - Master Clear input
  9. VSS - Ground
  10. RB0 - General-purpose I/O pin
  11. RB1 - General-purpose I/O pin
  12. RB2 - General-purpose I/O pin
  13. RB3 - General-purpose I/O pin
  14. RB4 - General-purpose I/O pin
  15. RB5 - General-purpose I/O pin
  16. RB6 - General-purpose I/O pin
  17. RB7 - General-purpose I/O pin
  18. VDD - Power supply voltage
  19. VSS - Ground
  20. RC0 - General-purpose I/O pin
  21. RC1 - General-purpose I/O pin
  22. RC2 - General-purpose I/O pin
  23. RC3 - General-purpose I/O pin
  24. RC4 - General-purpose I/O pin
  25. RC5 - General-purpose I/O pin

Functional Features

The PIC16F1934-E/MV offers a range of functional features, including:

  • Enhanced Capture/Compare/PWM (ECCP) module for advanced motor control applications
  • Analog-to-Digital Converter (ADC) for precise analog signal measurement
  • Timers and counters for accurate timing and event counting
  • Serial communication interfaces (UART, SPI, I2C) for data exchange with external devices
  • General-purpose I/O pins for versatile connectivity options

Advantages and Disadvantages

Advantages

  • Low power consumption enables energy-efficient operation
  • High performance allows for fast and responsive processing
  • Enhanced peripheral integration simplifies system design
  • Wide operating voltage range accommodates various power sources
  • Small form factor facilitates compact device designs

Disadvantages

  • Limited program memory size may restrict the complexity of applications
  • Relatively low RAM size may limit the amount of data that can be stored temporarily

Working Principles

The PIC16F1934-E/MV operates based on the principles of microcontroller architecture. It executes instructions stored in its program memory, interacts with peripherals, and processes data according to the program logic. The microcontroller's central processing unit (CPU) coordinates these operations, enabling the device to perform its intended functions.

Detailed Application Field Plans

The PIC16F1934-E/MV finds applications in various fields, including:

  1. Industrial Automation: Control systems for machinery and equipment
  2. Consumer Electronics: Remote controls, smart home devices
  3. Automotive: Engine control units, dashboard displays
  4. Medical Devices: Patient monitoring systems, diagnostic equipment
  5. Internet of Things (IoT): Sensor nodes, wearable devices

Detailed and Complete Alternative Models

  • PIC16F1934-I/ML
  • PIC16F1934-I/P
  • PIC16F1934-I/PT
  • PIC16F1934-I/SO
  • PIC16F1934-I/SS

These alternative models offer similar functionality and can be used as replacements for the PIC16F1934-E/MV depending on specific requirements.

In conclusion, the PIC16F1934-E/MV is a versatile microcontroller that combines low power consumption, high performance, and

기술 솔루션에 PIC16F1934-E/MV 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum operating frequency of PIC16F1934-E/MV?
    - The maximum operating frequency of PIC16F1934-E/MV is 32 MHz.

  2. Can PIC16F1934-E/MV be used for motor control applications?
    - Yes, PIC16F1934-E/MV can be used for motor control applications with its integrated PWM modules.

  3. Does PIC16F1934-E/MV support analog-to-digital conversion?
    - Yes, PIC16F1934-E/MV features a 10-bit ADC module for analog-to-digital conversion.

  4. What communication interfaces are supported by PIC16F1934-E/MV?
    - PIC16F1934-E/MV supports SPI, I2C, and UART communication interfaces.

  5. Is PIC16F1934-E/MV suitable for battery-powered applications?
    - Yes, PIC16F1934-E/MV is suitable for battery-powered applications due to its low power consumption features.

  6. Can PIC16F1934-E/MV be programmed using C language?
    - Yes, PIC16F1934-E/MV can be programmed using C language with the MPLAB XC8 compiler.

  7. What is the flash memory size of PIC16F1934-E/MV?
    - PIC16F1934-E/MV has 28 KB of flash memory for program storage.

  8. Does PIC16F1934-E/MV have built-in timers?
    - Yes, PIC16F1934-E/MV has multiple built-in timer modules for various timing applications.

  9. Can PIC16F1934-E/MV be used in automotive electronics?
    - Yes, PIC16F1934-E/MV is suitable for automotive electronics applications with its robust features.

  10. What development tools are available for programming PIC16F1934-E/MV?
    - Development tools such as MPLAB X IDE and PICkit programmers can be used for programming PIC16F1934-E/MV.