Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
PIC16F727-I/P
자세히보기 데이터시트

PIC16F727-I/P

Product Overview

Category

The PIC16F727-I/P belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • Low power consumption
  • High-performance RISC CPU
  • Wide operating voltage range
  • Enhanced peripheral integration
  • Flash program memory
  • EEPROM data memory
  • I/O ports with programmable pull-ups
  • Timers and counters
  • Analog-to-digital converters (ADC)
  • Serial communication modules

Package

The PIC16F727-I/P is available in a 40-pin plastic dual inline package (PDIP).

Essence

The essence of the PIC16F727-I/P lies in its ability to provide a compact and versatile solution for microcontroller-based applications.

Packaging/Quantity

This microcontroller is typically packaged in tubes or trays, with quantities varying based on customer requirements.

Specifications

  • CPU: 8-bit RISC
  • Program Memory: 14 KB Flash
  • Data Memory: 256 bytes EEPROM, 512 bytes RAM
  • Operating Voltage Range: 2.3V to 5.5V
  • Maximum Speed: 32 MHz
  • I/O Pins: 35
  • ADC Channels: 10
  • Communication Interfaces: UART, SPI, I2C
  • Timers: 4
  • Comparators: 2
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The PIC16F727-I/P has a total of 40 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. VSS - Ground
  9. OSC1/CLKIN - Oscillator input
  10. OSC2/CLKOUT - Oscillator output
  11. RC0 - General-purpose I/O pin
  12. RC1 - General-purpose I/O pin
  13. RC2 - General-purpose I/O pin
  14. RC3 - General-purpose I/O pin
  15. RC4 - General-purpose I/O pin
  16. RC5 - General-purpose I/O pin
  17. RC6/TX/CK - UART transmit pin/Synchronous Serial Clock
  18. RC7/RX/DT - UART receive pin/Synchronous Serial Data
  19. RB0 - General-purpose I/O pin
  20. RB1 - General-purpose I/O pin
  21. RB2 - General-purpose I/O pin
  22. RB3 - General-purpose I/O pin
  23. RB4 - General-purpose I/O pin
  24. RB5 - General-purpose I/O pin
  25. RB6 - General-purpose I/O pin
  26. RB7 - General-purpose I/O pin
  27. RB8 - General-purpose I/O pin
  28. RB9 - General-purpose I/O pin
  29. RB10 - General-purpose I/O pin
  30. RB11 - General-purpose I/O pin
  31. RB12 - General-purpose I/O pin
  32. RB13 - General-purpose I/O pin
  33. RB14 - General-purpose I/O pin
  34. RB15 - General-purpose I/O pin
  35. MCLR/VPP - Master Clear input/Voltage Programming Pin
  36. VCAP - Capacitor connection for internal voltage regulator
  37. VDD - Power supply voltage
  38. VSS - Ground
  39. VDDCORE - Core voltage supply
  40. VSSCORE - Core ground

Functional Features

The PIC16F727-I/P offers several functional features that enhance its usability and performance:

  1. Flash Program Memory: Allows for easy reprogramming of the microcontroller's instructions.
  2. EEPROM Data Memory: Provides non-volatile storage for critical data.
  3. I/O Ports with Programmable Pull-ups: Simplifies interfacing with external devices.
  4. Timers and Counters: Enables precise timing and event counting capabilities.
  5. Analog-to-Digital Converters (ADC): Facilitates conversion of analog signals into digital values.
  6. Serial Communication Modules: Supports various communication protocols such as UART, SPI, and I2C.

Advantages and Disadvantages

Advantages

  • Low power consumption extends battery life in portable applications.
  • High-performance RISC CPU enables efficient execution of instructions.
  • Wide operating voltage range allows for compatibility with different power sources.
  • Enhanced peripheral integration reduces the need for additional components.
  • Flash program memory simplifies firmware updates and modifications.

Disadvantages

  • Limited program

기술 솔루션에 PIC16F727-I/P 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum operating frequency of PIC16F727-I/P?
    - The maximum operating frequency of PIC16F727-I/P is 32 MHz.

  2. Can PIC16F727-I/P be used for motor control applications?
    - Yes, PIC16F727-I/P can be used for motor control applications with its integrated PWM module and analog-to-digital converter.

  3. Does PIC16F727-I/P support communication protocols like I2C or SPI?
    - Yes, PIC16F727-I/P supports both I2C and SPI communication protocols.

  4. What are the available memory options for program storage in PIC16F727-I/P?
    - PIC16F727-I/P offers flash program memory ranging from 3.5 to 7 KB.

  5. Is PIC16F727-I/P suitable for battery-powered applications?
    - Yes, PIC16F727-I/P is suitable for battery-powered applications due to its low power consumption features.

  6. Can PIC16F727-I/P be used in temperature sensing and control systems?
    - Yes, PIC16F727-I/P can be used in temperature sensing and control systems with its analog input and output capabilities.

  7. What development tools are compatible with PIC16F727-I/P?
    - PIC16F727-I/P is compatible with Microchip's MPLAB X IDE and various programming/debugging tools.

  8. Does PIC16F727-I/P have built-in security features for code protection?
    - Yes, PIC16F727-I/P provides code protection features to secure the intellectual property of the application.

  9. Can PIC16F727-I/P operate in harsh industrial environments?
    - Yes, PIC16F727-I/P is designed to operate reliably in harsh industrial environments with its robust design and wide operating temperature range.

  10. Are there any application notes or reference designs available for using PIC16F727-I/P in technical solutions?
    - Yes, Microchip provides application notes and reference designs to assist in implementing PIC16F727-I/P in various technical solutions.